1 to 20 of  34 products for noble excellence towels

No exact matches found for noble excellence towels

34 similar items found

Bleach Friendly Bath Towel, Hand Towel, or Washcloth Red;Bright White; -17%

Cannon Bath Towels, Hand Towels, or Washcloths Dry Off with a Feel That's Soft Cannon bath towels, hand towels, or washcloths are colorful and bleach-friendly. Made with thirsty ring-spun cotton, these towels excel at soaking up water and drying you

more >>
Sears
$7.99 $6.64 See It
Sea Floor Bath Mat-One Size, Clear

Sea Floor rubber bath mat by Excell Home Fashions offers easy care 100% PVC construction. Mildew resistant, this mat features powerful suction cups & a sculptured, molded design that allows water to drain easily. Mat measures 15 x 27.5., For the Home,Bath,Bath Rugs

more >>
BeallsFlorida.com
$12.99 See It
Shell Bath Mat-One Size,

Shell rubber bath mat by Excell Home Fashions offers easy care machine washable rubber construction. Anti-mildew mat features powerful suction cups for stability & measures 15.75 x 28., For the Home,Bath,Bath Rugs

more >>
BeallsFlorida.com
$9.99 See It
C-Fold or Multifold Towel Dispenser

Holds 300 C-Fold or 500 Multifold towels (sold separately). Includes mounting screws, lock and key. Global Product Type: Towel Dispensers; Towels Dispensers Type: Folded Towel Dispenser; Material: Stainless Steel; Color: Stainless Steel.

more >>
Sears
$65.99 See It
SY300-STN Satin Nickel Modern 24" Towel RackThe Rohl Modern -28%

Free Shipping on Orders Over $199

Rohl, SY300, Towel Rack, Modern, Accessory, Modern 24 Towel Rack The Rohl Modern Bath collection reflects the contemporary theme popular in many of todays bathrooms, combined with the excellence Rohl is known for. Each family within the Rohl Modern B

more >>
Build.com
$1,580.00 $1,139.25 See It
SY200-APC Polished Chrome 24 Inch Modern 24" Double Towel -28%

Free Shipping on Orders Over $199

Rohl, SY200, Towel Bar, Modern, Accessory, 24 Inch, Modern 24 Double Towel Bar The Rohl Modern Bath collection reflects the contemporary theme popular in many of todays bathrooms, combined with the excellence Rohl is known for. Each family within the

more >>
Build.com
$508.00 $366.00 See It
SY200-PN Polished Nickel 24 Inch Modern 24" Double Towel BarThe -28%

Free Shipping on Orders Over $199

Rohl, SY200, Towel Bar, Modern, Accessory, 24 Inch, Modern 24 Double Towel Bar The Rohl Modern Bath collection reflects the contemporary theme popular in many of todays bathrooms, combined with the excellence Rohl is known for. Each family within the

more >>
Build.com
$538.00 $387.75 See It
SY102-PN Polished Nickel 24 Inch Modern 24" Towel BarThe Rohl -28%

Free Shipping on Orders Over $199

Rohl, SY102, Towel Bar, Modern, Accessory, 24 Inch, Modern 24 Towel Bar The Rohl Modern Bath collection reflects the contemporary theme popular in many of todays bathrooms, combined with the excellence Rohl is known for. Each family within the Rohl M

more >>
Build.com
$332.00 $239.25 See It
SY101-APC Polished Chrome 18 Inch Modern 18" Towel BarThe Rohl -28%

Free Shipping on Orders Over $199

Rohl, SY101, Towel Bar, Modern, Accessory, 18 Inch, Modern 18 Towel Bar The Rohl Modern Bath collection reflects the contemporary theme popular in many of todays bathrooms, combined with the excellence Rohl is known for. Each family within the Rohl M

more >>
Build.com
$285.00 $205.50 See It
Sanitizing Wipe Companion SW-1528 TWL SS BLX

Ex-Cell Metal Products SW-1528 TWL SS BLX Sanitizing Wipe Companion, 18 gallon capacity waste receptacle for indoor use. Satin stainless steel body with a flat lid with 8" opening and finger-print proof textured finish. Fire-safe bodies with solid double-beaded bottom and vinyl trim, Vinyl TOWELS graphic in Black affixed to can just below top. Includes a removable LLDPE plastic liner with lift openings. The liner base resin meets UL94 Flammability Standard Made in the USA Features: -Includes a removable LLDPE plastic liner with lift openings. The liner base resin meets UL94 Flammability Standard.-Vinyl TOWELS graphic in Black affixed to can just below top.-Contains over 60% recycled material and 100% post-consumer recyclable.-18 gallon capacity indoor waste receptacle.-Satin stainless steel body with a flat lid with 8" opening and finger-print proof textured finish.-Product Type: Trash bin.-Shape: Round.-Room Use: Kitchen.-Collection: Towel Sanitizing Station Companion.-Color: Stainless Steel.-Powder Coated Finish: No.-Primary Material: Steel -Primary Material Details: Stainless Steel..-Additional Materials: LLDPE Plastic Liner.-Water Resistant: No -Water Resistant Details: ..-Fire Resistant: Yes.-Rust Resistant: No.-Tarnish Resistant: No.-Leak-Proof: No.-Antimicrobial: No.-Scratch Resistant: No.-Fade Resistant: No.-Mildew Resistant: No.-Drip-Free: No.-Odor Seal: No.-Ergonomic: No.-Lightweight: No.-Lid Included: Yes -Lid Type: Open.-Removable Lid: Yes.-Slow Close Lid: No..-Battery Operated: No -Number of Batteries Needed: .-Rechargeable Batteries: .-Batteries Included: .-Battery Type: ..-Automatic Sensor: No -Opening Time: .-Sensor Range: ..-Liner Included: Yes -Removable Liner: Yes..-Trash Compactor: No -Amperage: .-Voltage: .-Horsepower: ..-Stackable: No.-Portable: No.-Curbside: No.-Locking Security: No.-Multi-Compartment: No.-Pull Out/Under Counter: No.-Rain Protector: No.-Side Access Door: No.-Step On: No.-Trash Bag Fastener: No.-Vented: No.-Recycling Type: .-Residential Recycling Application: No.-Decals: Yes.-Gallon Capacity: 18.-Application: Indoor.-Commercial Use: Yes.-Recycled Content: Yes -Total Recycled Content (Percentage): 60.-Post-Consumer Content (Percentage): .-Remanufactured/Refurbished: No..-Eco-Friendly: Yes.-Product Care: Wipe clean with a damp cloth.-Country of Manufacture: United States.Specifications: -ADA Compliant: Yes.-UL Listed: No.-cUL Listed: No.-NFPA Certified: No.-ASTM Compliant: No.-CE Certified: No.-cETL Certified: No.-CSA Certified: No.-Energy Star Compliant: No.-General Conformity Certificate: No.-Greenguard Certified: No.-ISO 9001 Certified: No.-ISTA 3A Certified: No.Dimensions: -Overall Height - Top to Bottom: 28.-Overall Width - Side to Side: 15.-Overall Depth - Front to Back: 15.-Interior Bin Height - Top to Bottom: 26.-Interior Bin Width - Side to Side: 14.-Interior Bin Depth - Front to Back: 14.-Opening Height - Top to Bottom: .-Opening Width - Side to Side: 8.-Overall Product Weight: 30.Assembly: -Assembly

more >>
Wayfair Supply
$239.99 See It
Mi6 Functional Training System

Hoist Mi6 Functional Training System The unique and stylish HOIST® Mi6 is a personal pulley gym that is engineered with the innovative excellence and aesthetic appeal that the fitness industry has come to expect from HOIST. Features NEW streamlined design conceals all of the unit?s hardware and includes a Carbon Fiber printed shrouding and an Adjustable Tablet Compartment. Pulley systems are combined with 360˚ Rotating Columns, a unique Patent Pending Internal Adjuster System and Quick-Release Adaptors to offer smooth and easy one-handed adjustments. 28 pulley positions allow for each side of the body to be trained independently or both sides simultaneously Integrated Recessed Accessory Rack, Bottle Holders and Towel Hooks for convenient storage of accessories and personal items. Radial LOC® weight system reduces shifting between weight plates for a smooth, quiet motion Fully enclosed weight stacks for ease of use and added noise reduction. Compact, walk-through design requires minimal floor space that is designed to fit into a corner. Split Weight Cabling® delivers 50% resistance to pulleys for increased cable travel (114″ with strap handles) Multi-position chin-up bar with diamond pattern for improved grip. Accessories Adjustable strap handles (1 pair) for varying user heights and arm lengths. Assist strap for weight assisted pull-ups and lunges. Padded ankle/thigh strap for comfortable leg exercises. Dual attachment aluminum long bar enables the use of both pulleys simultaneously. Commercial quality ultra-light aluminum curl bar with revolving attachment port. Comes standard with 150 pounds of weight (per side) and is upgradeable to 200 pounds.

more >>
The Fitness Outlet
$3,199.00 See It
Erie Antique Brass/Millennium Brass 18-Inch Towel Bar

FREE SHIPPING! See Details

Erie creates classiness and excellence in its design. Its sheen finish with Antique and Millennium brass makes it a designers dream. -hardware included -Our accessories feature solid brass construction to ensure years of reliability -Limited Lifetime Warranty -Easy to install

more >>
Bellacor
$101.65 See It
Erie Antique Brass/Millennium Brass 24-Inch Towel Bar

FREE SHIPPING! See Details

Erie creates classiness and excellence in its design. Its sheen finish with Antique and Millennium brass makes it a designers dream. -hardware included -Our accessories feature solid brass construction to ensure years of reliability -Limited Lifetime Warranty -Easy to install

more >>
Bellacor
$106.20 See It
Marquee Spa Facial Medical Spa Equipment Package

Superb Luxuary package for the day Spa, medical spa which is ready to excel. It offers the equipment you need to master with your facial room - a facial bed, multi-function unit, diamond microdermabrasion machine, sterilizer, double wax warmer, hot towel cabi, stool, and superb trolley

more >>
Skin Act
$7,299.00 See It
XLERATOR Hand Dryer XL-SI, Custom Cover XLERATOR Hand Dryer

Excel Dryer XL-SI XLERATOR Hand Dryer Guaranteed lowest XLERATOR pricing, anywhere! We are a trusted, Master Distributor for Excel Dryer. We will match or beat any online advertised price. Call 888-50-DRYER to talk with a sales rep right now! Would you like to see a live demo? * This item must be custom made and is not returnable. You can have any image, color or logo applied. Please call to discuss pricing. The Logo shown is for display only. Some examples of custom covers with the XLERATOR hand dryer: Xlerator Hand Dryer Features Dries Hands Completely in 10 to 15 Seconds Uses 80% Less Energy 95% Cost Savings vs. Paper Towels GREENSPEC Approved and Helps Qualify for LEED credits. Source Reduction Alternative Promotes Hygiene Specifications Dimensions 11 3/4" LG. X 12 11/16" HIGH X 6 11/16" DEEP (298 MM LG. X 322 MM HIGH X 170 MM DEEP) Weight:16 LBS. (7.3 KGS.) Construction Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts. Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring. All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements. Entire mechanism shall be internally grounded. Mechanism Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet). Hand dryer heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet). Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed. Limited Warranty The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option. Review the Xlerator Hand Dryer Specs Review the Excel Dryer Xlerator Information Guide Covering XL-BW, XL-W, XL-BL, XL-GR, XL-C, and XL-SB Models v flvbase = 'http://www.CategoryFiveTechnologies.com/Video/'; v theflv = 'xlerator.flv'; v alignvideo = 'bottomright'; v playalways = 'no'; v show

more >>
ProDryers.com
$510.00 See It
XL-GG Excel Dryer XLERATOR Hand Dryer, Exclusive ProDryers Go Green Design, 110-120 Volt, LEED Credits, GreenSpec Listed, Warm Air, Fast 10 Second Dry

Excel Dryer XL-GG XLERATOR Hand DryerThis ProDryers exclusive "Go Green" designed Xlerator is perfect for businesses that want a hand dryer that promotes a visible go green environment and naturally draws more use towards the hand dryer and away from paper towels. 110-120 volt units are normally in stock for the ProDryers Exclusive Go Green design Xlerator. While in stock, they will normally ship same day. All other voltages for the Go Green cover such as 208, 220-240, or 277 volt, call us at 888-503-7937. All voltages of all Xlerator hand dryer standard colors (white, black, graphite, chrome, stainless steel) are normally in stock and will ship same day. Most Excel Dryer XL-GG (ProDryers Go Green Design) Xlerator orders will be Lightning Fast Same Day Shipping. Shipping is FREE of charge on all Xlerators to anywhere in the continental US! Guaranteed lowest XLERATOR pricing, anywhere! We are a trusted, Master Distributor for Excel Dryer. We will match or beat any online advertised price. Call 888-50-DRYER to talk with a sales rep right now! Xlerator Hand Dryer Features Dries Hands Completely in 10 to 15 Seconds Uses 80% Less Energy 95% Cost Savings vs. Paper Towels GREENSPEC Approved and Helps Qualify for LEED credits. Source Reduction Alternative Promotes Hygiene Specifications Dimensions 11 3/4" LG. X 12 11/16" HIGH X 6 11/16" DEEP (298 MM LG. X 322 MM HIGH X 170 MM DEEP) Weight:16 LBS. (7.3 KGS.) Construction Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts. Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring. All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements. Entire mechanism shall be internally grounded. Mechanism Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet). Hand dryer heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet). Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if ha

more >>
ProDryers.com
$510.00 See It
XLERATOR Hand Dryer XL-C, Zinc Die-Cast Cover - Chrome Plated, Automatic Sensor, Surface Mounted, LEED Credits, GreenSpec Listed, Commercial Hand Dryer

Excel Dryer XL-C Xlerator Hand Dryer Most Excel Dryer XL-C orders will be Lightning Fast Same Day Shipping. Shipping is FREE of charge on all Xlerators to anywhere in the continental US! Guaranteed lowest Excel Dryer XL-C Chrome XLERATOR pricing, anywhere! We are a trusted, Master Distributor for Excel Dryer. We normally carry a very large stock of Excel Dryer XL-C Chrome hand dryers. We will match or beat any online advertised price. Call 888-50-DRYER to talk with a sales rep right now! Xlerator Hand Dryer Features Dries Hands Completely in 10 to 15 Seconds Uses 80% Less Energy 95% Cost Savings vs. Paper Towels GREENSPEC Approved and Helps Qualify for LEED credits. Source Reduction Alternative Promotes Hygiene Specifications Dimensions 11 3/4" LG. X 12 11/16" HIGH X 6 11/16" DEEP (298 MM LG. X 322 MM HIGH X 170 MM DEEP) Weight:16 LBS. (7.3 KGS.) Construction Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts. Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring. All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements. Entire mechanism shall be internally grounded. Mechanism Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet). Hand dryer heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet). Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed. Limited Warranty The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option. Review the Xlerator Hand Dryer Specs Review the Excel Dryer Xlerator Information Guide Covering XL-BW, XL-W, XL-BL, XL-GR, XL-C, and XL-SB Models v flvbase = 'http://www.CategoryFiveTechnologies.com/Video/'; v theflv = 'xlerator.flv'; v alignvideo = 'bottomright'; v playalways = 'no'; v showevery = '1'; v a

more >>
ProDryers.com
$540.00 See It
XLERATOR Hand Dryer XL-BW, White Thermoset Resin (BMC) Cover, Automatic Sensor, Surface Mounted, LEED Credits, GreenSpec Listed, Commercial Hand Dryer

Excel Dryer XL-BW Xlerator Hand Dryer Most Excel Dryer XL-BW orders will be Lightning Fast Same Day Shipping. Shipping is FREE of charge on all Xlerators to anywhere in the continental US! Guaranteed lowest Excel Dryer XL-BW XLERATOR pricing, anywhere! We are a trusted, Master Distributor for Excel Dryer. The XL-BW XLERATOR hand dryer is USA made top quality. We will match or beat any online advertised price. Call 888-50-DRYER to talk with a sales rep right now! * The Excel Dryer XL-BW is our top seller at ProDryers. It's durable, reliable, USA made (all Xlerator dryers are USA Made!), dries hands super fast, should last on average of 7-10 years, and most importantly, people love to use it! The XL-BW is a best seller at ProDryers and does a superior job at drying hands fast. XL-BW Xlerator Hand Dryer Features Dries Hands Completely in 10 to 15 Seconds Uses 80% Less Energy 95% Cost Savings vs. Paper Towels GREENSPEC Approved and Helps Qualify for LEED credits. Source Reduction Alternative Promotes Hygiene XL-BW Specifications Dimensions 11 3/4" LG. X 12 11/16" HIGH X 6 11/16" DEEP (298 MM LG. X 322 MM HIGH X 170 MM DEEP) Weight:16 LBS. (7.3 KGS.) Construction Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts. Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring. All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements. Entire mechanism shall be internally grounded. Mechanism Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet). Hand dryer heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet). Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed. Limited Warranty The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option. Rev

more >>
ProDryers.com
$400.00 See It
XLERATOR Hand Dryer XL-W, Zinc Die-Cast Cover - White, Automatic Sensor, Surface Mounted, LEED Credits, GreenSpec Listed, Commercial Hand Dryer

Excel Dryer XL-W XLERATOR Hand Dryer Most Excel Dryer XL-W orders will be Lightning Fast Same Day Shipping. Shipping is FREE of charge on all Xlerators to anywhere in the continental US! Guaranteed lowest Excel Dryer XL-W XLERATOR pricing, anywhere! We are a trusted, Excel Dryer XL-W Master Distributor for Excel Dryer. We will match or beat any online advertised Excel Dryer XL-W price. Call 888-50-DRYER to talk with a sales rep right now! The Excel Dryer XL-W has a white, metallic cover; zinc die-cast, with a white epoxy paint. One of the most common questions we get at ProDryers is the difference of the XL-W vs. the XL-BW cover. The answer is just the cover. One is a BMC commercial grade plastic and the other is a white metal cover. The XL-W Xlerator is a top seller at ProDryers. We stock them by the hundreds, all voltages to offer unbeatable pricing with fast free shipping!Xlerator Hand Dryer Features Dries Hands Completely in 10 to 15 Seconds Uses 80% Less Energy 95% Cost Savings vs. Paper Towels GREENSPEC Approved and Helps Qualify for LEED credits. Source Reduction Alternative Promotes Hygiene Specifications Dimensions 11 3/4" LG. X 12 11/16" HIGH X 6 11/16" DEEP (298 MM LG. X 322 MM HIGH X 170 MM DEEP) Weight:16 LBS. (7.3 KGS.) Construction Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts. Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring. All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements. Entire mechanism shall be internally grounded. Mechanism Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet). Hand dryer heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet). Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed. Limited Warranty The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed

more >>
ProDryers.com
$440.00 See It
XL-BF XLERATOR Hand Dryer, Exclusive ProDryers Blue Fusion Design, 110-120 Volt, LEED Credits, GreenSpec Listed, Warm Air, Fast 10 Second Dry

Excel Dryer XL-BF Blue Fusion XLERATOR Hand Dryer designed by ProDryersThis ProDryers exclusive "Blue Fusion" designed Xlerator is perfect for businesses that want a hand dryer that naturally draws more use towards the hand dryer and away from paper towels. 110-120 volt units are normally in stock for the ProDryers Exclusive Blue Fusion design Xlerator. While in stock, they will normally ship same day. All other voltages for the Blue Fusion cover such as 208, 220-240, or 277 volt, call us at 888-503-7937. All voltages of all Xlerator hand dryer standard colors (white, black, graphite, chrome, stainless steel) are normally in stock and will ship same day. Most Excel Dryer XL-BF (ProDryers Blue Fusion Design) Xlerator orders will be Lightning Fast Same Day Shipping. Shipping is FREE of charge on all Xlerators to anywhere in the continental US! Guaranteed lowest XLERATOR pricing, anywhere! We are a trusted, Master Distributor for Excel Dryer. We will match or beat any online advertised price. Call 888-50-DRYER to talk with a sales rep right now! Xlerator Hand Dryer Features Dries Hands Completely in 10 to 15 Seconds Uses 80% Less Energy 95% Cost Savings vs. Paper Towels GREENSPEC Approved and Helps Qualify for LEED credits. Source Reduction Alternative Promotes Hygiene Specifications Dimensions 11 3/4" LG. X 12 11/16" HIGH X 6 11/16" DEEP (298 MM LG. X 322 MM HIGH X 170 MM DEEP) Weight:16 LBS. (7.3 KGS.) Construction Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts. Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring. All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements. Entire mechanism shall be internally grounded. Mechanism Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet). Hand dryer heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet). Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if

more >>
ProDryers.com
$510.00 See It
Search within results
  • Find by Price
    • $ to $