1 to 20 of  93 products for olympus 8mm f3 5

No exact matches found for olympus 8mm f3 5

93 similar items found

T3+ Carbon Clip-On TT Bars

Unlike many companies that sell base bar and extensions as a one-piece deal, Profile Design has an option for those looking to customize their time-trial position. If you use a Profile base bar for a complete setup, or you just want to use your drop road bars as a base, the T3 Plus Carbon Clip-On TT Bars give you a balance of comfort, control, and aerodynamics. Profile Design's T3 Carbon clip-n TT bars feature a drop-bend shape. This shape is similar to the traditional ski-bend extension, only with a deeper downward angle along the extension. This allows for more hand and wrist positions, which in turn, creates a more individualized comfort. The extensions are constructed out of multi-layered, multi-directional carbon fiber which emphasizes strength and durability rather than stiffness and low weight. To customize the fit, the T3 Plus includes Profile's J4 brackets. With these brackets, the armrests are set back 20mm from the center of the base bar, and they're reversible for a more forward armrest position. The bracket is compatible with aftermarket risers in order to elevate the armrest, while concurrently maintaining your desired wrist angle. Even better, it's not difficult to adjust. In fact, it's all done with a single bolt. These bars are finished with Profile's F-35 armrests and EVA-molded pads. These are adjustable in width and reach in order to properly support your forearms. The Profile Design T3 Plus Carbon Clip-On TT Bars fit both 31. 8mm and 26. 0mm base bars (with the included shim). They tip the scales around 620g and are available with a drop-bend and in the color Black.

more >>
Competitive Cyclist
$239.99 See It
T3+ Carbon Clip-On TT Bars Black, One Size

Unlike many companies that sell base bar and extensions as a one-piece deal, Profile Design has an option for those looking to customize their time-trial position. If you use a Profile base bar for a complete setup, or you just want to use your drop road bars as a base, the T3 Plus Carbon Clip-On TT Bars give you a balance of comfort, control, and aerodynamics. Profile Design's T3 Carbon clip-n TT bars feature a drop-bend shape. This shape is similar to the traditional ski-bend extension, only with a deeper downward angle along the extension. This allows for more hand and wrist positions, which in turn, creates a more individualized comfort. The extensions are constructed out of multi-layered, multi-directional carbon fiber which emphasizes strength and durability rather than stiffness and low weight. To customize the fit, the T3 Plus includes Profile's J4 brackets. With these brackets, the armrests are set back 20mm from the center of the base bar, and they're reversible for a more forward armrest position. The bracket is compatible with aftermarket risers in order to elevate the armrest, while concurrently maintaining your desired wrist angle. Even better, it's not difficult to adjust. In fact, it's all done with a single bolt. These bars are finished with Profile's F-35 armrests and EVA-molded pads. These are adjustable in width and reach in order to properly support your forearms. The Profile Design T3 Plus Carbon Clip-On TT Bars fit both 31. 8mm and 26. 0mm base bars (with the included shim). They tip the scales around 620g and are available with a drop-bend and in the color Black.

more >>
Competitive Cyclist
$239.99 See It
T4+ Carbon Clip-On TT Bars One Color, One Size

Unlike how many create base bars and extensions as a one-piece-deal, Profile Design has an option for those who need to customize their time trial position. So, whether you use one of Profile's base bars for a complete setup, or you just need to use your drop bars as a base, the T4+ Carbon Clip-On TT Bars will fit the bill. Profile Design's T4 Carbon Clip-on TT bars feature a traditional ski-bend shape with a rather shallow angle between the extension and the shifters. To customize the fit, the bars include Profile Design's J4 bracket. With this bracket, the armrests are set back 20mm from the center of the base bar, and they're reversible for a more forward armrest position. It's compatible with aftermarket risers in order to elevate the armrest, while also maintaining the desired wrist angle. Even better, these bars aren't difficult to adjust -- it's all done with a single bolt. In terms of comfort, the T4 bars are finished with Profile's F-35 armrests. These are adjustable for width and reach, meaning that you're able to place them exactly where you need them. The Profile Design T4 Plus Carbon Clip-on TT Bars are compatible with both 31. 8mm and 26. 0mm bars (with included shim). They're available in one size and in the color Black. Also, the complete rig tips the scales around 600 grams.

more >>
Backcountry.com
$239.99 See It
T3+ Carbon Clip-On TT Bars Black, One Size

Unlike many companies that sell base bar and extensions as a one-piece deal, Profile Design has an option for those looking to customize their time-trial position. If you use a Profile base bar for a complete setup, or you just want to use your drop road bars as a base, the T3 Plus Carbon Clip-On TT Bars give you a balance of comfort, control, and aerodynamics. Profile Design's T3 Carbon clip-n TT bars feature a drop-bend shape. This shape is similar to the traditional ski-bend extension, only with a deeper downward angle along the extension. This allows for more hand and wrist positions, which in turn, creates a more individualized comfort. The extensions are constructed out of multi-layered, multi-directional carbon fiber which emphasizes strength and durability rather than stiffness and low weight. To customize the fit, the T3 Plus includes Profile's J4 brackets. With these brackets, the armrests are set back 20mm from the center of the base bar, and they're reversible for a more forward armrest position. The bracket is compatible with aftermarket risers in order to elevate the armrest, while concurrently maintaining your desired wrist angle. Even better, it's not difficult to adjust. In fact, it's all done with a single bolt. These bars are finished with Profile's F-35 armrests and EVA-molded pads. These are adjustable in width and reach in order to properly support your forearms. The Profile Design T3 Plus Carbon Clip-On TT Bars fit both 31. 8mm and 26. 0mm base bars (with the included shim). They tip the scales around 620g and are available with a drop-bend and in the color Black.

more >>
Backcountry.com
$239.99 See It
T4+ Carbon Clip-On TT Bars

Unlike how many create base bars and extensions as a one-piece-deal, Profile Design has an option for those who need to customize their time trial position. So, whether you use one of Profile's base bars for a complete setup, or you just need to use your drop bars as a base, the T4+ Carbon Clip-On TT Bars will fit the bill. Profile Design's T4 Carbon Clip-on TT bars feature a traditional ski-bend shape with a rather shallow angle between the extension and the shifters. To customize the fit, the bars include Profile Design's J4 bracket. With this bracket, the armrests are set back 20mm from the center of the base bar, and they're reversible for a more forward armrest position. It's compatible with aftermarket risers in order to elevate the armrest, while also maintaining the desired wrist angle. Even better, these bars aren't difficult to adjust -- it's all done with a single bolt. In terms of comfort, the T4 bars are finished with Profile's F-35 armrests. These are adjustable for width and reach, meaning that you're able to place them exactly where you need them. The Profile Design T4 Plus Carbon Clip-on TT Bars are compatible with both 31. 8mm and 26. 0mm bars (with included shim). They're available in one size and in the color Black. Also, the complete rig tips the scales around 600 grams.

more >>
Competitive Cyclist
$239.99 See It
KABA Simplex / Eplex Kaba E-Plex E5210BWL Lever Electronic Push... E5210BWL

KABA Eplex KABA Simplex / Eplex Kaba E-Plex E5210BWL Lever Electronic Push... Additional Information Manufacturer Kaba Access Control Model E5210BWL Dimensions Exterior: 8-7â„8" (225mm) H x 3-3â„8"(86mm) W x 3-13â„16" (97mm) D Number of Codes 3,000 Codes; over 100 million possible code combinations Programming Locks are programmed via E-Plex Enterprise Software and a laptop or netbook (not included) - provides easy management of doors and users Handing Non-handed Operation Modes PIN access Modes: Lockout, Passage can be toggled on/off or can be preprogrammed to relock after a certain number of hours (from 1 to 24) Numeric Keypad Vandal resistant, solid metal pushbuttons Backset Varies by exit device type Minimum Stile Recommended 5" (127 mm) Interchangeable Cores Interchangeable core cylinders, Best and Equivalents (6 or 7-pin Length) Not Included Door Preparation ASA 161 (Easily installs on door preparation with two additional through bore holes (wood or metal doors) Door Thickness 1 3â„4" (44 mm) to 2 1â„4" (57 mm) Operating Temperature Front Housing: -31° F (-35° C) to + 151° F (66° C) - Rear Housing: -31° F (-35° C) to + 130° F (55° C) Certifications Americans with Disabilities Act (ADA) ANSI/BHMA ANSI/BHMA A156.2, Grade 1 Certification U.L. Listed 3-hour UL/ULC fire rating for "A" label doors Warranty 3-year warranty from date of installation; built-in warranty counter in lock memory Weight 10.0000 E5210BWL

more >>
keylessaccesslocks.com
$600.00 See It
T4+ Carbon Clip-On TT Bars One Color, One Size

Unlike how many create base bars and extensions as a one-piece-deal, Profile Design has an option for those who need to customize their time trial position. So, whether you use one of Profile's base bars for a complete setup, or you just need to use your drop bars as a base, the T4+ Carbon Clip-On TT Bars will fit the bill. Profile Design's T4 Carbon Clip-on TT bars feature a traditional ski-bend shape with a rather shallow angle between the extension and the shifters. To customize the fit, the bars include Profile Design's J4 bracket. With this bracket, the armrests are set back 20mm from the center of the base bar, and they're reversible for a more forward armrest position. It's compatible with aftermarket risers in order to elevate the armrest, while also maintaining the desired wrist angle. Even better, these bars aren't difficult to adjust -- it's all done with a single bolt. In terms of comfort, the T4 bars are finished with Profile's F-35 armrests. These are adjustable for width and reach, meaning that you're able to place them exactly where you need them. The Profile Design T4 Plus Carbon Clip-on TT Bars are compatible with both 31. 8mm and 26. 0mm bars (with included shim). They're available in one size and in the color Black. Also, the complete rig tips the scales around 600 grams.

more >>
Competitive Cyclist
$239.99 See It
KABA Simplex / Eplex Kaba E-Plex E2032LL-626-41 Lever Electronic... E2032LL-626-41

KABA Eplex KABA Simplex / Eplex Kaba E-Plex E2032LL-626-41 Lever Electronic... Additional Information Manufacturer Kaba Access Control Model E2032LL-626-41 Dimensions Exterior: 8-15/16" (227 mm) H x 3 5â„16" (84 mm) W x 2 13â„16" (71 mm) D Interior: 8 7â„8" (225 mm) H x 3 1â„4" (83 mm) W x 2 1â„4"(57 mm) D Number of Codes Multiple Users 100 Codes Programming Lock is easily programmed via keypad without removing lock from the door Handing Non-handed Operation Modes PIN access. Passage can be toggled on/off or on E2000 only, can be pre-programmed to re-lock after a certain number of hours. Lockout Numeric Keypad Vandal resistant, solid metal pushbuttons Backset 2 3â„8" (60 mm) Latch 1â„2" (13 mm) throw latch Minimum Stile Recommended 5" (127 mm) Door Preparation Cylindrical ASA 161 (Easily installs ondoor preparation with three additional through bore holes (wood or metal doors) Door Thickness 1 3â„8" (35 mm) to 2 1â„2" (64 mm) Operating Temperature Indoor/Outdoor Approved; -31° F (-35° C) to + 151° F (66° C) Certifications Americans with Disabilities Act (ADA) ANSI/BHMA BHMA Grade 1 Certified U.L. Listed UL 10C 3-Hour Fire Rating Warranty 2-year warranty from date of installation; built-in warranty counter in lock memory Weight 10.0000 E2032LL-626-41

more >>
keylessaccesslocks.com
$278.10 See It
KABA Simplex / Eplex Kaba E-Plex E5066MWL Lever Electronic Push... E5066MWL

KABA Eplex KABA Simplex / Eplex Kaba E-Plex E5066MWL Lever Electronic Push... Additional Information Manufacturer Kaba Access Control Model E5066MWL Dimensions Exterior: 8-7â„8" (225mm) H x 3-3â„8"(86mm) W x 3-13â„16" (97mm) D Interior: 8-7â„8" (225mm) H x 3-3â„16" (81mm) W x 2-1â„8" (54mm) D Number of Codes 100 access codes per door (upgrade to 300 via software); over 100 million possible code combinations Programming Locks are programmed via keypad or with optional Microsoft Excel based software simplifies management of doors and users as facilitys number of users and access points grow Handing Non-handed Operation Modes PIN access Modes: Lockout, Passage can be toggled on/off or can be preprogrammed to relock after a certain number of hours (from 1 to 24) Numeric Keypad Vandal resistant, solid metal pushbuttons Minimum Stile Recommended 5" (127 mm) Removable Cores Removable core cylinder, Medeco, ASSA and Yale Large Format, Not Included Door Preparation ASA 86 door preparation with two additional through bore holes Door Thickness 1 3â„8" (35 mm) to 2 1â„4" (57 mm) Operating Temperature Front Housing: -31° F (-35° C) to + 151° F (66° C) - Rear Housing: -31° F (-35° C) to + 130° F (55° C) Certifications Americans with Disabilities Act (ADA) ANSI/BHMA ANSI/BHMA A156.2, Grade 1 Certification U.L. Listed 3-hour, UL/ULC fire door rating for "A" labeled doors Warranty 3-year warranty from date of installation; built-in warranty counter in lock memory E5066MWL

more >>
keylessaccesslocks.com
$557.31 See It
KABA Simplex / Eplex Kaba E-Plex E201UXSLL-626-41 Lever Electronic... E201UXSLL-626-41

KABA Eplex KABA Simplex / Eplex Kaba E-Plex E201UXSLL-626-41 Lever Electronic... Additional Information Manufacturer Kaba Access Control Model E201UXSLL-626-41 Number of Codes Multiple Users 100 Codes Programming Lock is easily programmed via keypad without removing lock from the door Handing Non-handed Operation Modes PIN access. Passage can be toggled on/off or on E2000 only, can be pre-programmed to re-lock after a certain number of hours. Lockout Numeric Keypad Vandal resistant, solid metal pushbuttons Backset Varies by exit device Minimum Stile Recommended 5" (127 mm) Interchangeable Cores Key-in-Lever cylinder in Schlage C Keyway with black Kaba cap Door Thickness 1-3â„4" (44 mm) to 2-1â„4" (57 mm). Pre-assembled to accommodate doors 1-3â„4" (44 mm) to 2-1â„8" (54 mm) Operating Temperature Indoor/Outdoor Approved; -31° F (-35° C) to + 151° F (66° C) Certifications Americans with Disabilities Act (ADA) ANSI/BHMA BHMA Grade 1 Certified U.L. Listed UL 10C Fire rated Warranty 2-year warranty from date of installation; built-in warranty counter in lock memory Weight 9.0000 E201UXSLL-626-41

more >>
keylessaccesslocks.com
$370.80 See It
KABA Simplex / Eplex Kaba E-Plex E5210XSWL Lever Electronic Push... E5210XSWL

KABA Eplex KABA Simplex / Eplex Kaba E-Plex E5210XSWL Lever Electronic Push... Additional Information Manufacturer Kaba Access Control Model E5210XSWL Dimensions Exterior: 8-7â„8" (225mm) H x 3-3â„8"(86mm) W x 3-13â„16" (97mm) D Number of Codes 3,000 Codes; over 100 million possible code combinations Programming Locks are programmed via E-Plex Enterprise Software and a laptop or netbook (not included) - provides easy management of doors and users Handing Non-handed Operation Modes PIN access Modes: Lockout, Passage can be toggled on/off or can be preprogrammed to relock after a certain number of hours (from 1 to 24) Numeric Keypad Vandal resistant, solid metal pushbuttons Backset Varies by exit device type Minimum Stile Recommended 5" (127 mm) Universal Key-in-Lever Cylinders Key-in-lever cylinder, Kaba Cylinder (Schlage "C" keyway) Included, keyed different Door Preparation ASA 161 (Easily installs on door preparation with two additional through bore holes (wood or metal doors) Door Thickness 1 3â„4" (44 mm) to 2 1â„4" (57 mm) Operating Temperature Front Housing: -31° F (-35° C) to + 151° F (66° C) - Rear Housing: -31° F (-35° C) to + 130° F (55° C) Certifications Americans with Disabilities Act (ADA) ANSI/BHMA ANSI/BHMA A156.2, Grade 1 Certification U.L. Listed 3-hour UL/ULC fire rating for "A" label doors Warranty 3-year warranty from date of installation; built-in warranty counter in lock memory E5210XSWL

more >>
keylessaccesslocks.com
$600.00 See It
KABA Simplex / Eplex Kaba PowerLever 1550ICRCRAX Self-Powered... 1550ICR/CRAX

KABA Eplex KABA Simplex / Eplex Kaba PowerLever 1550ICRCRAX Self-Powered... Additional Information Manufacturer Kaba Access Control Model 1550ICR/CRAX Dimensions Outside Case 3-1/2" W x 9-1/4" H x 4" D Number of Codes Multiple Codes Up-to-20 unique access codes Programming Easy to program at the keypad Handing Non-handed Operation Modes Single credential access with PIN, Passage & Lockout Numeric Keypad Epoxy coated metal buttons Backset 2-3/4" Standard Latch 9/16" Interchangeable Cores Small format interchangeable core Arrow, Best, Falcon, KSP or Keymark (core not supplied) Door Preparation ASA 161 with minor modifications Door Thickness 1 3â„8" to 2" (35 mm to 51 mm) adjustable without any tools Operating Temperature -13°F to 151°F (-25°C to 66°C) Certifications ADA compliant lever handles ANSI/BHMA Door Locks: Grade 1 certified; BHMA A156.2 / 156.25 U.L. Listed 3 hours UL / ULC Warranty 1 Year Limited Weight 10.0000 1550ICR/CRAX

more >>
keylessaccesslocks.com
$715.64 See It
KABA Simplex / Eplex Kaba PowerLever 4550SBLCRAD Self-Powered... 4550SBL/CRAD

KABA Eplex KABA Simplex / Eplex Kaba PowerLever 4550SBLCRAD Self-Powered... Additional Information Manufacturer Kaba Access Control Model 4550SBL/CRAD Dimensions 9-1â„4" (235 mm) H x 3-1â„2" (89 mm) W x 4" (102 mm) D Number of Codes Multiple Codes 3,000 users Programming Pushbuttons, SmartKey and software Handing Non-handed Operation Modes Single credential access with PIN or SmartKey, Dual credential access with PIN and SmartKey, Passage, Lockout Numeric Keypad Epoxy coated metal buttons Backset 2-3/4" Standard Universal Key-in-Lever Cylinders Standard Conventional Cylinder Included (Schlage "C" Keyway) Door Preparation ASA 161 with minor modifications Door Thickness Door thickness from 1 3â„8" to 2" (35 mm to 51 mm) adjustable without any tools Operating Temperature -13°F to 151°F (-25°C to 66°C) Compliances Withstands rain and dust (1 hour exposure as defined in UL 2058, sec. 36 and 37) Withstands salt spray (96-hour exposure as defined in UL 437, sec. 12) Certifications ADA compliant lever handles ANSI/BHMA Grade 1 certified; BHMA A156.2 / 156.25 U.L. Listed 3 hours UL / ULC Warranty 1 Year Limited 4550SBL/CRAD

more >>
keylessaccesslocks.com
$852.84 See It
KABA Simplex / Eplex Kaba PowerLever 4560IBLCRAX Self-Powered... 4560IBL/CRAX

KABA Eplex KABA Simplex / Eplex Kaba PowerLever 4560IBLCRAX Self-Powered... Additional Information Manufacturer Kaba Access Control Model 4560IBL/CRAX Dimensions 9-1â„4" (235 mm) H x 3-1â„2" (89 mm) W x 4" (102 mm) D Number of Codes Multiple Codes 3,000 users Programming Pushbuttons, SmartKey and software Handing Non-handed Operation Modes Single credential access with PIN or SmartKey, Dual credential access with PIN and SmartKey, Passage, Lockout, Active Pin Numeric Keypad Epoxy coated metal buttons Backset 2-3/4" Standard Interchangeable Cores Interchangeable core cylinders, Best and Equivalents (6 or 7-pin Length) Not Included Door Preparation ASA 161 with minor modifications Door Thickness Door thickness from 1 3â„8" to 2" (35 mm to 51 mm) adjustable without any tools Operating Temperature -13°F to 151°F (-25°C to 66°C) Compliances Withstands rain and dust (1 hour exposure as defined in UL 2058, sec. 36 and 37) Withstands salt spray (96-hour exposure as defined in UL 437, sec. 12) Certifications ADA compliant lever handles ANSI/BHMA Grade 1 certified; BHMA A156.2 / 156.25 U.L. Listed 3 hours UL / ULC Warranty 1 Year Limited Weight 10.0000 4560IBL/CRAX

more >>
keylessaccesslocks.com
$994.98 See It
KABA Simplex / Eplex Kaba PowerPlex P2031LL-626-41 Self Powering... P2031LL-626-41

KABA Eplex KABA Simplex / Eplex Kaba PowerPlex P2031LL-626-41 Self Powering... Additional Information Manufacturer Kaba Access Control Model P2031LL-626-41 Dimensions Exterior: 8-15/16" (227 mm) H x 3 5â„16" (84 mm) W x 3 3â„15" (71 mm) D Interior: 8 7â„8" (225 mm) H x 3 1â„4" (83 mm) W x 2 1â„4"(57 mm) D Number of Codes Multiple Users 100 Codes Programming Lock is easily programmed via keypad without removing lock from the door Handing Non-handed Operation Modes PIN access. Passage can be toggled on/off or on E2000 only, can be pre-programmed to re-lock after a certain number of hours. Lockout Numeric Keypad Vandal resistant, solid metal pushbuttons Backset 2 3â„4" (70 mm) Latch 1â„2" (13 mm) throw latch Minimum Stile Recommended 5" (127 mm) Door Preparation Cylindrical ASA 161 (Easily installs ondoor preparation with three additional through bore holes (wood or metal doors) Door Thickness 1 3â„8" (35 mm) to 2 1â„2" (64 mm) Operating Temperature Indoor/Outdoor Approved; -31° F (-35° C) to + 151° F (66° C) Certifications Americans with Disabilities Act (ADA) ANSI/BHMA BHMA Grade 1 Certified U.L. Listed UL 10C 3-Hour Fire Rating Warranty 2-year warranty from date of installation; built-in warranty counter in lock memory Weight 9.0000 P2031LL-626-41

more >>
keylessaccesslocks.com
$386.25 See It
KABA Simplex / Eplex Kaba E-Plex E5031SWL Lever Electronic Push... E5031SWL

KABA Eplex KABA Simplex / Eplex Kaba E-Plex E5031SWL Lever Electronic Push... Additional Information Manufacturer Kaba Access Control Model E5031SWL Dimensions Exterior: 8-7â„8" (225mm) H x 3-3â„8"(86mm) W x 3-13â„16" (97mm) D Interior: 8-7â„8" (225mm) H x 3-3â„16" (81mm) W x 2-1â„8" (54mm) D Number of Codes 100 access codes per door (upgrade to 300 via software); over 100 million possible code combinations Programming Locks are programmed via keypad or with optional Microsoft Excel based software simplifies management of doors and users as facilitys number of users and access points grow Handing Non-handed Operation Modes PIN access Modes: Lockout, Passage can be toggled on/off or can be preprogrammed to relock after a certain number of hours (from 1 to 24) Numeric Keypad Vandal resistant, solid metal pushbuttons Backset 2 3â„4" (70 mm) Latch 1â„2" (13 mm) latch Minimum Stile Recommended 5" (127 mm) Removable Cores Removable core cylinder, Schlage Large Format, Not Included Door Preparation ASA 161 (Easily installs on door preparation with two additional through bore holes (wood or metal doors Door Thickness 1 3â„8" (35 mm) to 2 1â„4" (57 mm) Operating Temperature Front Housing: -31° F (-35° C) to + 151° F (66° C) - Rear Housing: -31° F (-35° C) to + 130° F (55° C) Certifications Americans with Disabilities Act (ADA) ANSI/BHMA ANSI/BHMA A156.2, Grade 1 Certification U.L. Listed 3-hour UL/ULC fire rating for "A" label doors Warranty 3-year warranty from date of installation; built-in warranty counter in lock memory Weight 10.0000 E5031SWL

more >>
keylessaccesslocks.com
$437.75 See It
KABA Simplex / Eplex Kaba E-Plex E2066BLL-626-41 Lever Electronic... E2066BLL-626-41

KABA Eplex KABA Simplex / Eplex Kaba E-Plex E2066BLL-626-41 Lever Electronic... Additional Information Manufacturer Kaba Access Control Model E2066BLL-626-41 Dimensions Exterior: 8-15/16" (227 mm) H x 3 5â„16" (84 mm) W x 2 13â„16" (71 mm) D Interior: 8 7â„8" (225 mm) H x 3 1â„4" (83 mm) W x 2 1â„4"(57 mm) D Number of Codes Multiple Users 100 Codes Programming Lock is easily programmed via keypad without removing lock from the door Handing Non-handed Operation Modes PIN access. Passage can be toggled on/off or on E2000 only, can be pre-programmed to re-lock after a certain number of hours. Lockout Numeric Keypad Vandal resistant, solid metal pushbuttons Backset 2 3â„4" (70 mm) backset Latch 3â„4" (19 mm) latch, 1" (25 mm) Minimum Stile Recommended 5" (127 mm) Interchangeable Cores Small format Best and equivalent (6 or 7-pin length); cylinder not included Door Preparation ASA 86 door preparation with three additional through bore holes Door Thickness 1 3â„8" (35 mm) to 2 1â„2" (64 mm) Operating Temperature Indoor/Outdoor Approved; -31° F (-35° C) to + 151° F (66° C) Certifications Americans with Disabilities Act (ADA) ANSI/BHMA BHMA Grade 1 Certified U.L. Listed UL 10C 3-Hour Fire Rating Warranty 2-year warranty from date of installation; built-in warranty counter in lock memory Weight 10.0000 E2066BLL-626-41

more >>
keylessaccesslocks.com
$383.16 See It
KABA Simplex / Eplex Kaba E-Plex E5031CWL Lever Electronic Push... E5031CWL

KABA Eplex KABA Simplex / Eplex Kaba E-Plex E5031CWL Lever Electronic Push... Additional Information Manufacturer Kaba Access Control Model E5031CWL Dimensions Exterior: 8-7â„8" (225mm) H x 3-3â„8"(86mm) W x 3-13â„16" (97mm) D Interior: 8-7â„8" (225mm) H x 3-3â„16" (81mm) W x 2-1â„8" (54mm) D Number of Codes 100 access codes per door (upgrade to 300 via software); over 100 million possible code combinations Programming Locks are programmed via keypad or with optional Microsoft Excel based software simplifies management of doors and users as facilitys number of users and access points grow Handing Non-handed Operation Modes PIN access Modes: Lockout, Passage can be toggled on/off or can be preprogrammed to relock after a certain number of hours (from 1 to 24) Numeric Keypad Vandal resistant, solid metal pushbuttons Backset 2 3â„4" (70 mm) Latch 1â„2" (13 mm) latch Minimum Stile Recommended 5" (127 mm) Removable Cores Removable core cylinder, Corbin Russwin Large Format, Not Included Door Preparation ASA 161 (Easily installs on door preparation with two additional through bore holes (wood or metal doors Door Thickness 1 3â„8" (35 mm) to 2 1â„4" (57 mm) Operating Temperature Front Housing: -31° F (-35° C) to + 151° F (66° C) - Rear Housing: -31° F (-35° C) to + 130° F (55° C) Certifications Americans with Disabilities Act (ADA) ANSI/BHMA ANSI/BHMA A156.2, Grade 1 Certification U.L. Listed 3-hour UL/ULC fire rating for "A" label doors Warranty 3-year warranty from date of installation; built-in warranty counter in lock memory Weight 10.0000 E5031CWL

more >>
keylessaccesslocks.com
$437.75 See It
DSP- 50 Plug-in Vehicle Loop Detector

FEATURES The Diablo DSP-51AT detector can be configured to provide an output for tailgating vehicles or as an accurate vehicle counter. The detector has enhanced Anti-Tailgating features that allow the end user to select the allowed number of vehicles through a secured access. The enhancements are not only for tailgating but also for providing an accurate vehicle count output as a secondary feature. The Diablo DSP-51AT was designed for use with current typical loop configurations and sizes used throughout the industry. The simplicity of the set-up and operation allows the end user to implement the detector without special training devices.   OPERATION The Diablo DSP-51AT is mainly a standard vehicle loop detector. But that’s where the similarity ends. Its built-in secondary functions are exclusive anti-tailgating and vehicle counting software. The two modes are selectable from a front panel DIP switch. In the anti-tailgate mode, the software compares the signature versus the number of legal vehicles input. If there is any discrepancy, the secondary output is enabled indicating a tailgating incident. In the counting mode, the secondary output is pulsed once for every vehicle entering the loop system based on a proprietary signature algorithm.   FRONT PANEL SELECTABLE SWITCHES SENSITIVITY SWITCH This detector has a 10 position rotary sensitivity switch. The unit is shipped in the “5” position which is the normal sensitivity level. Sensitivity can be adjusted up and down from this level to accommodate different street loops.   FUNCTION SWITCHES The detector has a 6-position DIP switch to incorporate the following functions. DIPSWITCHES 5 and 6 – Frequency One of four operating frequencies can be selected by changing these two switches. DIPSWITCH 4 – Failure Operation OFF = Fail Safe operation. ON = Fail Secure operation. DIPSWITCH 3 – Failure Output Polarity OFF = Fail output low indicates loop failure ON = Fail output high indicates loop failure DIPSWITCH 2 – Operating Mode OFF = Anti-Tailgating Operation ON = Counter Operation DIPSWITCH 1 – Anti-Tailgating Test Toggle switch to indicate number of vehicles in inbound queue.   INDICATORS   Green LED solid ON is power OK. Fast blink = “Shorted” loop. Slow blink = “Open” loop circuit.   Red LED's OFF = No Detect. ON = Detect   Blue LED On = Output B On   Yellow LED OFF = Unarmed. ON = AT armed   Outputs - Three separate solid state (normally open collector) outputs – 30 milliamps maximum and 20volts maximum. Output pins – (looking into the connector – Right to left.) 1 Loop 2 Loop 3 Power input “+” 4 N/C 5 /AT input 6 Output B 7 Fail 8 Output A 9 Power input “+” 10 Power (and logic) Common Operating Temperature - -35°F to 165°F (-37°C to 74°C)   Power - 10 to 30 Volts D.C. ( 30 mA. max at 12 volts)   Enclosure - Impact resistant, high temperature plastic. H - 2.375” (60.4 mm) W – 0.86” (22 mm) D -2.25 ” (58mm)

more >>
Gate Openers Unlimited
$108.25 See It
KABA Simplex / Eplex Kaba PowerLever 4560SCRCRAD Self-Powered... 4560SCR/CRAD

KABA Eplex KABA Simplex / Eplex Kaba PowerLever 4560SCRCRAD Self-Powered... Additional Information Manufacturer Kaba Access Control Model 4560SCR/CRAD Dimensions 9-1â„4" (235 mm) H x 3-1â„2" (89 mm) W x 4" (102 mm) D Number of Codes Multiple Codes 3,000 users Programming Pushbuttons, SmartKey and software Handing Non-handed Operation Modes Single credential access with PIN or SmartKey, Dual credential access with PIN and SmartKey, Passage, Lockout, Active Pin Numeric Keypad Epoxy coated metal buttons Backset 2-3/4" Standard Universal Key-in-Lever Cylinders Standard Coventional Cylinder Included (Schlage "C" Keyway) Door Preparation ASA 161 with minor modifications Door Thickness Door thickness from 1 3â„8" to 2" (35 mm to 51 mm) adjustable without any tools Operating Temperature -13°F to 151°F (-25°C to 66°C) Compliances Withstands rain and dust (1 hour exposure as defined in UL 2058, sec. 36 and 37) Withstands salt spray (96-hour exposure as defined in UL 437, sec. 12) Certifications ADA compliant lever handles ANSI/BHMA Grade 1 certified; BHMA A156.2 / 156.25 U.L. Listed 3 hours UL / ULC Warranty 1 Year Limited Weight 10.0000 4560SCR/CRAD

more >>
keylessaccesslocks.com
$1,051.22 See It
Search within results
  • Find by Price
    • $ to $