PDU - Limited Warranty: 2 Year - Width: 17" - Height: 3.5" - Depth: 3.5" - Color: Black - Input Voltage: 120 V AC - Output Voltage: 120 V AC
Power Backplate - Limited Warranty: 2 Year - Width: 6" - Height: 5" - Depth: 2" - Color: Black - Green Compliant: Green Compliant - Green Compliance Certificate/Authority: RoHS
This 194 Watt (output) 4 foot linear was made with exceptional quality and offers huge energy savings compared to HID or fluorescent systems. The HLED series highbay LED fixture is highly efficient with a CRI of 85 and boasts a dependable 77,000 hour life span. Delivers 20,098 lumens of quality LED light with a color temperature of 4000K. Includes 5 year warranty.
Signal Splitter - Limited Warranty: 90 Day - Green Compliant: Green Compliant - Green Compliance Certificate/Authority: RoHS - Frequency Range: 5 MHz to 1002 MHz
1 audio/video input (analog stereo audio and composite video), 3 audio/video outputs
Studio Monitors - Sweetwater presents the DA-6, the distribution amplifier for getting the audio signal where you need without any sound degradation. With the DA-6, you can send balanced audio signals from a single source down long cable runs to multiple different destinations, and the signal doesn't break up. Drawmer's DA-6 Balanced Distribution Amplifier has six stereo channels (12 mono) and features XLR balanced inputs and outputs. Optional transformer balancing enables remote amplifiers and recorders to be fed to the DA-6 from separate power supplies. The DA-6 can also be connected to other units via auxiliary link stereo jack sockets is the rear panel. It's precision and quality performance make the DA-6 the ideal amplifier for broadcast, video, or anywhere clear audio has to be sent to many locations or through long cable runs.? 1x6 Stereo Distribution Amp with Monitoring? 1 set of stereo (2) XLR inputs? 6 sets of stereo (2) XLR outputs? Input stage has LED level meter? Each output channel can be switched to mono? Each output channel can be individually monitored? Built-in headphone amp? Optional transformer balanced outputs? Electronically balanced inputs with individual left/right level controls? LED metering on input for balancing stereo material or two mono signals? Left/Right level controls on each output with a stereo/ mono switch? Headphone jack to monitor output of selected channel? LED metering on output of selected channel? Auxiliary pair of balanced 1/4" output jacks for linking multiple DA6 units? 1 unit rack space? Inputs and Outputs are balanced XLRs at +4dBu Monitor Management
Input voltage: 120 - 330 VAC clamping. Output voltage: 110 - 120 VAC (60 Hz)
PDU - Limited Warranty: 2 Year - Width: 17.6" - Height: 1.8" - Depth: 2.3" - Color: Black - Form Factor: Rack-mountable - Input Voltage: 208 V AC
PDU - Limited Warranty: 2 Year - Width: 17.6" - Height: 1.8" - Depth: 2.3" - Color: Black - Form Factor: Rack-mountable - Input Voltage: 120 V AC
This 3-Light Flush-Mount Old Bronze Dome Light Fixture is functional as well as decorative. Its attractive, alabaster-style glass dome evenly distributes the light output to create a pleasant glow. Finish: Old Bronze Number of Lights: 3 Lamp Type: T2 Lamp Maximum Wattage: 13 Base Type: GU24 Bulb Included: Yes Dimmension: Width: 15.25 in., Height: 6 in.
The 8-Port IR distribution hub allows you to remotely control any electronic equipment such as audio receiver, DVD, or satellite receiver from any room in the house. Its terminal block connectors allow for easy fingertip insertion of IR distribution cable. The Hub can support up to eight IR control sets and is easily expandable for larger installs. Features: Devices controlled: 8 Maximum locations: 8 Input/output Connector: Terminal block Expandable Power Supply included Dimensions: 6.3x3 in. Single band targets only A/V & PC Equipment > A/V Hardware > IR Distribution, A/V & PC Equipment > A/V Hardware > IR Distribution CH01015
This distribution valve was developed jointly by Fly High and MasterCraft for use in their complete wakeboard ballast system upgrades. Due to popular demand, we've made it available individually for the aftermarket. Connect the output of your pump to the included 1" Flow-Rite Quick Connect and you can use the lever on the front of the valve to select the output, making it easy to fill and drain two ballast locations with a single reversible pump. All of the necessary fittings are included, so you just supply the hose and hose clamps (available separately, see recommended accessories) to make up the connections and you're set. If you need to split a single connection to two ballast bags, this solid billet aluminum valve that is designed to be flush mounted in the boat for easy access is the best way to do it. Open the valve to fill the factory ballast system hard tank and once it is full turn the dial to fill the extra ballast bags on top of the factory system. The three 1" flow-rite quick connects will easily integrate into impeller style ballast pumps allowing you to switch between the sacs that you need to fill or drain. This is a must have for people that want to fill only the hard tanks on some occasions and the full ballast system the rest of the time.
The Leviton 4x4 Breakout Module (47609-4X4) is a telephone distribution module that features six eight-position RJ-45 voice grade connectors, permitting you to divide an incoming four-line telephone connection into four individual lines for use on one- or two-line output connectors. Designed for...
This 194 Watt (output) 4 foot linear fixture with occupancy sensor was made with exceptional quality and offers huge energy savings compared to HID or fluorescent systems. The HLED series highbay LED fixture is highly efficient with a CRI of 85 and boasts a dependable 77,000 hour life span. Delivers 20,098 lumens of quality LED light with a color temperature of 4000K. Includes occupancy sensor and 5 year warranty. It does not include a power cord.
PDU - Width: 17.6" - Height: 1.7" - Depth: 8.4" - Input Voltage: 208 V AC - Output Receptacles: IEC 60320 C19
FREE SHIPPING! See Details
- Direct/indirect light output for wide, even distribution - Wood profile trim with decorative metal support frame - Classic traditional deign easily adapts to many kitchen styles - Electronic ballast - Oak trim - Made in the USA.
Professional 4 way aerial amplifier from our new PLATINUM range, designed to boost the signal received by the aerial or satellite receiver for distribution to TV or radio sets. The product will work with Digital Terrestrial, most satellite receivers, DAB and VHF signals. Features 2 x F connector input sockets, 4 x F connector outputs, Full Output (allows the unit to be slaved), Digital Bypass (for use with magic eye and similar systems), key slot mounting holes, power on LED, surge protection, short protection and 1.2 m mains lead. Colour Piano Black Dimensions (mm) 265x85x50 Weight (kg) 0.4 Power Input 230 V AC @ 50 Hz Impedance (Ohms) 75 Gain (dB) 10 Output & 20 Full Output Bandwidth 47-230 & 470-862 MHz Type 4 Outlet Connectors F Type LVD Standard EN60065 EMC Standard EN55103 For Use with Digital Terrestrial, DAB, VHF and most Satellite receivers, VHF & FM Signals Ideal for Both Home and Business Applications Key Slot Mounting Holes Another Quality Product from Electrovision
Surface Mount LED downlight with light and output and distribution that rivals that of typical 65W BR30 incandescents but at only 13W of input power. 2700K (white) correlated color temperatures. Offers long life and high lumen output.Bulb Type: LED Collection: LED Surface Energy Star Compliant:...
This 134 watt Albeo High Bay LED luminair has a standard lumen output of 18,340 umens,an extraordinary 137 lumens per watt, and is capable of replacing a 320W metal halide (HID). It has 2 modules and operates on a 120-277V and has a 70 CRI at 5000K color temperature. Additional options are available as well as your choice of distribution patterns/optics beam angles, 0-10V dimming, mounting options, motion and daylight controls, cords and plugs, and accessories. It comes with a 5 year warranty and outstanding 100,000 hour lamp life.
This 190 watt Albeo High Bay LED luminair has a very high lumen output of more than 24,000 lumens,an extraordinary 130 lumens per watt, and is capable of replacing a 400W metal halide (HID). It has 2 modules and operates on a 120-277V and has a 70 CRI. Both 4000K and 5000K color temperatures are available as well as your choice of distribution patters/optics beam angles, mounting options and accessories. It comes with a 5 year warranty and outstanding 100,000 hour lamp life.