1 to 20 of  100 products for promag archangel ruger 1022 rifle stock conversion kit

No exact matches found for promag archangel ruger 1022 rifle stock conversion kit

100 similar items found

10/22 Chicago Furniture Conversaion Kits - Conversion Kit & Drum Magazine

Easy-to-install kit gives your Ruger 10/22 the instantly recognizable appearance and handling of the classic, 1920-30’s submachine gun. For a fraction of the cost of an original, you can shoot a look-alike using plentiful .22 LR ammunition without putting wear on a historic heirloom. Kit includes all mounting hardware and tools, no gunsmithing required. Simply remove the 10/22’s barreled action from the factory stock, and install the kit components following the step-by-step instructions. The action fits securely into the kit’s precision-machined, billet aluminum chassis—no drilling or permanent alterations to the action are required, so you can return it to the origi Mfg: Scottwerx, Llc. SPECS: Aluminum, powder coat finish, black, semi-gloss; walnut, matte finish. Kit includes receiver chassis, buttstock, pistol grip, forend grip, muzzle tip, front grip bracket, mounting hardware, and instructions. Available with or without Pro-Mag 50-round drum magazine. Spare magazines available s

more >>
Brownells
$414.99 See It
10/22 Chicago Furniture Conversaion Kits - Conversion Kit, Only

Easy-to-install kit gives your Ruger 10/22 the instantly recognizable appearance and handling of the classic, 1920-30’s submachine gun. For a fraction of the cost of an original, you can shoot a look-alike using plentiful .22 LR ammunition without putting wear on a historic heirloom. Kit includes all mounting hardware and tools, no gunsmithing required. Simply remove the 10/22’s barreled action from the factory stock, and install the kit components following the step-by-step instructions. The action fits securely into the kit’s precision-machined, billet aluminum chassis—no drilling or permanent alterations to the action are required, so you can return it to the origi Mfg: Scottwerx, Llc. SPECS: Aluminum, powder coat finish, black, semi-gloss; walnut, matte finish. Kit includes receiver chassis, buttstock, pistol grip, forend grip, muzzle tip, front grip bracket, mounting hardware, and instructions. Available with or without Pro-Mag 50-round drum magazine. Spare magazines available s

more >>
Brownells
$354.99 See It
10/22 90/22 Bullpup Stock - 90/22 Bullpup Stock

High Tower Armory 90/22 is a compact, maneuverable stock kit for the Ruger® 10/22® which utilizes a bullpup design for superior balance and ergonomics. This incredibly durable, polymer stock will reduce the overall length of most 10/22’s to about 26 1/2 inches, just over the federally required minimum length for rifles. The HTA 90/22 also features a CNC machined monolithic aluminum Picatinny optics rail and aluminum bedding block, as well as an ambidextrous steel charging handle which cycles the factory 10/22 bolt from forward positions. The HTA 90/22 trigger linkage is made of Melonite treated steel for the most consistent and efficient transfer of energy, having a resistan Mfg: High Tower Armory SPECS: Fits - Ruger 10/22 rifles with a 18" barrel.  Construction - Fiber reinforced polymer.  6061 aluminum optics rail and bedding block.  Steel charging handle with melonite finish.  Steel trigger linkage with melonite finish.  Length - 21.5" long without 10/

more >>
Brownells
$269.99 See It
Ar-15/M16 T6 Commercial Buttstock Kits - T6 Collapsible Stock Conversion Kit

Easy-to-install kit contains everything you need to convert a fixed-stock AR-15 rifle to a GI-style collapsible carbine stock system, or use to complete a custom-built carbine. Lets you easily adjust length of pull for different-stature shooters and different tactical situations and clothing/armor configurations. Kit includes 1.17" O.D. commercial receiver extension tube with six, positive-locking notches for the T6 buttstock of tough, durable fiberglass-reinforced molded polymer. Also includes steel receiver lock plate, steel lock nut, polymer sling loop, carbine recoil spring, and carbine buffer. Requires no permanent alterations to rifle. Installation instructions included. Mfg: Tapco Weapons Accessories SPECS: Aluminum and reinforced injection-molded polymer, matte black. 8” (20.3cm) OAL collapsed; 11¾” (29.9cm) OAL fully extended.

more >>
Brownells
$68.99 See It
Promag Tactical Picatinny Ruger Ranch Rifle Scope Rail

FREE SHIPPING Orders $50+

This ProMag Tactical Picatinny Scope Mount quickly attaches to the Ruger Mini-14 Ranch, Mini-30, 6.8 Ranch rifles. The mount provides additional flexibility when mounting longer scopes, electronic sights or night vision.

more >>
Overstock Main
$52.99 See It
Mosin-Nagant Archangel 7.62x54r Magazines - 10rd Mag For Archangel Mosin-Nagant Stock

These proprietary 10 and 5 round detachable magazines are for the AA9130 Archangel OPFOR® Series Precision Rifle Stock - suitable for most Mosin-Nagant rifles, both hex and round receiver, the Soviet M-38/M-44/ Chinese T-53 carbines, and Finnish M-39 rifles and carbines. The magazine body is molded from a proprietary carbon-fiber filled black polymer, and utilizes a proprietary feeding system.  The magazine has a molded polymer follower for ease of feeding, and a heat-treated Chrome-silicon wire spring ensuring reliable feeding and function. Mfg: Pro Mag

more >>
Brownells
$18.99 See It
Mosin-Nagant Archangel 7.62x54r Magazines - 5rd Mag For Archangel Mosin-Nagant Stock

These proprietary 10 and 5 round detachable magazines are for the AA9130 Archangel OPFOR® Series Precision Rifle Stock - suitable for most Mosin-Nagant rifles, both hex and round receiver, the Soviet M-38/M-44/ Chinese T-53 carbines, and Finnish M-39 rifles and carbines. The magazine body is molded from a proprietary carbon-fiber filled black polymer, and utilizes a proprietary feeding system.  The magazine has a molded polymer follower for ease of feeding, and a heat-treated Chrome-silicon wire spring ensuring reliable feeding and function. Mfg: Pro Mag

more >>
Brownells
$14.99 See It
Sks Intrafuse Polymer Collapsible Stocks - Black Intrafuse Stock, W/O Bayonet Cut -14%

Collapsible stock unit coverts any SKS into an easy-to-pack and store short rifle without permanent alterations or gunsmithing. Nearly indestructible, lightweight, composite synthetic stock fits all models of the SKS (even the Model D with slight modification). Six-position adjustable T6 buttstock allows fast changes in length-of-pull. If you are building your SKS from a parts kit, this stock contains three, U.S-made compliance parts: Intrafuse Stock (with sling loop), SAW style Pistol Grip (with storage) and Handguard. Models available to fit SKS rifles with or without cut for blade-style bayonet. Also available with Picatinny/Weaver-style Railed handguard for mounting a red dot, ho Mfg: Tapco Weapons Accessories SPECS: Molded polymer, black. 32” (81.2cm) overall extended length. 2 lb.(.9kg) weight. Fits SKS only. Length of pull extends up to 4” (10.2cm).

more >>
Brownells
$73.99 $64.00 See It
Ar-15 .22 Lr Conversion Kits - 22lr Ar15 Conversion Kit Echo

Drop-in .22 LR conversion system comes fully assembled and ready to install in any semi-auto AR-15 to help you practice critical shooting skills with economical rimfire ammunition. Concentrate on improving grip, sight alignment, trigger pull, and other skills without burning up expensive centerfire ammo. Simply replace the bolt and carrier with the conversion unit, load up the included magazine with high-velocity round-nose .22 LR ammo, and you’re ready to shoot. Precision machined from high-grade carbon or stainless steel for reliable function in any mil-spec AR-15 rifle or carbine chambered in 5.56mm NATO, including many gas piston systems.  Bravo kit consists of a stainless Mfg: Cmmg

more >>
Brownells
$279.99 See It
Ar-15 .22 Lr Conversion Kits - 22lr Ar15 Conversion Kit India

Drop-in .22 LR conversion system comes fully assembled and ready to install in any semi-auto AR-15 to help you practice critical shooting skills with economical rimfire ammunition. Concentrate on improving grip, sight alignment, trigger pull, and other skills without burning up expensive centerfire ammo. Simply replace the bolt and carrier with the conversion unit, load up the included magazine with high-velocity round-nose .22 LR ammo, and you’re ready to shoot. Precision machined from high-grade carbon or stainless steel for reliable function in any mil-spec AR-15 rifle or carbine chambered in 5.56mm NATO, including many gas piston systems.  Bravo kit consists of a stainless Mfg: Cmmg

more >>
Brownells
$329.99 See It
Ar-15/M16 Gas Piston Conversion Kit - Rifle Gas Piston Kit

Drop-in gas piston conversion kit installs in only five minutes and improves the reliability and function of your AR-15 by eliminating fouling caused by gas venting into the receiver. Rifle runs cooler, with less frequent need for cleaning and less wear on carrier and bolt - resulting in longer service life from these critical parts. The unique, kidney-shaped cross-section of the piston and piston chamber provides extra mass and surface area to evenly spread out gas pressure and reduce felt recoil, allowing you to stay on target for rapid follow-up shots. Installs in minutes on both semi- or full-auto/burst rifles with a barrel O.D. of .875" or less. No need to remove gas block/sight Mfg: Osprey Defense SPECS: Steel, black oxide finish. Handguard – Reinforced polymer composite, black. Kit includes preassembled piston assembly, bolt carrier, handguard, and instructions. Carbine fits 11½" to 16" barrels with .875" O.D. or smaller, and carbine-length gas system. Rifle fi

more >>
Brownells
$299.99 See It
Ruger Embroidered .10/.22 Rifle Case Black -28%

EXTRA 5% OFF Fitness & Sports

Next time you're loading up your rifle for a trip to the shooting range or deer stand, slip it into the ALLEN Ruger Embroidered .10/.22 Rifle Case: 40 in. (275-40). Your gun will be protected by a durable Endura fabric shell and 7/8" foam padding.

more >>
Sears
$24.99 $17.99 See It
Mosin-Nagant Archangel Opfor Rifle Stock - Mosin-Nagant Archangel Opfor Stock

A drop-in fit next-generation stock, constructed of a proprietary carbon-fiber filled super-tough polymer, for the classic Mosin-Nagant M1891. The stock fits most M1891 rifles, the hex and round receivers found on the 91/30, the Soviet M-38/M-44/Chinese T-53 carbines, and Finnish M-39 rifles and carbines. Featuring a click-adjustable length-of-pull with rubber butt-pad, click-adjustable cheek-riser, a modern ergonomic goose-neck style grip with comfortable palm-swell, and QD sling points that accept push-button style swivels (available separately). The forend allows free-floating of most barrel contours and includes a barrel tensioner. The stock is inletted to accept a Timney Trigger® Mfg: Pro Mag

more >>
Brownells
$175.99 See It
Remington 700 Short Action Bdl Police Rifle Stocks - Bdl Police Rifle Stock, Sand

Same stock as used by the U.S. Army. Exclusive, molded-in, machined, aluminum bedding block gives a true “drop-in” fit that requires no initial fitting and no maintenance. Made from Kevlar/graphite-reinforced fiberglass, bonded to structural poly­urethane foam for lightest weight and complete stability, ­regardless of changes in temperature or humidity. Extra-wide forend and double palmswells in the grip area help promote a tighter, more comfortable hold for consistent accuracy when it’s needed most. Available in Black or Sand. Mfg: H-S Precision SPECS: Oversize, target-style stock. Flat black (B) or Sand, baked-on, non-reflective finish. 13½" (34.2cm) l.o.p., minimum drop at heel, wt. 2 lb. 12 oz. (1.3 kg). Includes sling and tripod stud, rubber recoil pad and ­instructions. BDL fits Remington 700 BDL short action, heavy bar

more >>
Brownells
$349.99 See It
Motorcycle Mallory Breakerless Ignition Conversion Kit

Provides a simple conversion from breaker points in Big Twin to "breakerless" trouble-free precision timing Dual fire system No moving parts to wear out Points are replaced by the Unilite module Requires use of stock or high performance advance

more >>
J&P Cycles
$165.99 See It
C6-120V-LSA LED Downlight Kit, 6" 120V, Edison Base Recessed Pan Conversion Kit for LR6 Series Module Kits

About the Cree C6-120V-LSA LED LED Downlight Kit, 6" 120V, Edison Base Recessed Pan Conversion Kit for CR6 and LR6 Series Module KitsThe Cree C6-120V-LSA is a hard-wire conversion kit designed to convert “pan” type recessed downlight housings with 6”-8” apertures for use...

more >>
Westside Wholesale
$31.20 See It
Km3 Conversion Kits - Surefire Km3 Conversion Kit

Aerospace aluminum body Finish options available Mil-Specifications hard anodized finish Total Internal Reflection lens Coated tempered window Screw on replacement head Fits M95(xx) and M96(xx)* series Millennium Universal Weapon Lights M952V and M951XM07 M96 battery housing must be converted into 2 battery system Shock resistant Bezel diameter: 1.37 inches Length: 2.2 inches Weight with batteries: 2.6 ounces Requires two 123A batteries (not included) Maximum out put white 150 lumens Maximum output IR 120 lumens No-hassle manufacturer's warranty The SureFire KM3 LED Weapon Light Convers Mfg: Surefire SPECS: Aluminum body, Mil-Spec hard anodized, Black or Desert Tan color, Total Internal Reflective Lens, Coated temper window, Screw on replacement head, Fits M95(xx) and M96(xx)* series Millennium Universal Weapon Lights M952V and M951XM07, Shock resistant, Bezel diameter: 1.37 inches, Length: 2

more >>
Brownells
$269.10 See It
Eicho Crib Conversion -20%

Design by Spot On Square, 2013.Made in Europe.The Eicho Crib Conversion converts your Eicho Crib into a modern daybed, extending the life of your crib as your child grows. Easily converts by removing one crib side panel and replacing with the convers

more >>
YLiving
$240.00 $192.00 See It
10/22® 50rd 22lr Drum Magazine - 50-Rd Mag For Ruger 10/22

Dependable, super-capacity drum magazine lets you shoot 50-round strings of .22 LR ammunition in your 10/22 for plenty of plinking fun. No modifications to rifle needed; simply snaps into the mag well like the standard factory magazine. Tough, impact-resistant polycarbonate body and follower are self-lubricating, so they work with the constant-force spring to deliver smooth, uniform feeding for consistent operation. Smoke-tinted translucent body enables easy visual checks of ammo status. Steel hex screws anchored into brass bushings securely hold the body together to ensure exceptional strength and rigidity, yet are easily removed for disassembly and cleaning. Mfg: Black Dog Machine Llc SPECS: Injection-molded polycarbonate, smoke. Fits Ruger 10/22, .22 LR only.

more >>
Brownells
$59.99 See It
Remington 700 Short Action Vertical Grip Tactical Rifle Stocks - Short Action Vertical Grip Tactical Stock, Sand

Designed for police departments and law enforcement agencies. Stock is instantly and fully adjustable (no tools required) for length of pull and drop at comb. Plus, the handfilling, vertical grip and adjustable cheekpiece are ambidextrous for both right- and left-handed shooters. Machined aluminum bedding block runs from near the front swivel mount all the way back, into the pistol grip so no additional bedding is needed for superi­or accuracy. Kevlar/graphite-reinforced fiberglass provides stability and strength for a zero that never shifts due to changes in temperature or humidity. Barrel channel is relieved for straight contour, bull-style, heavy barrels up to 1.250'''' in ­diameter. Availab Mfg: H-S Precision SPECS: Oversize, target-style stock. Flat Black (B) or Sand baked-on, non-­reflective, textured finish. Adjustable from 12½'''' (31cm) to 14½'''' (36cm) lop, 0'''' to +2'''' (5cm) rise at comb. 4 lb. 3 oz. (1.9 kg) wt. Fits Remington 700 BDL Short (right hand) and Long actions only.

more >>
Brownells
$669.99 See It
Search within results
  • Find by Price
    • $ to $