1 to 20 of  21 products for rave diablo 2 rider towable tube

No exact matches found for rave diablo 2 rider towable tube

21 similar items found

Freud Diablo Framing Saw Blade - 6 1/2 Inch x 24T, For Wood & Wood Composites, Model D0624X

The Diablo high-performance framing saw blade cuts like a hot knife through butter, thanks to its super-thin laser cut kerf for effortless cutting performance. This carbide-tipped wood blade works great on wet lumber. Blade Diameter in. 6 1/2, Teeth...

more >>
Northern Tool
$10.99 See It
Freud Diablo 14 72T Steel Demon Cermet 2 Carbide Ferrous Metal Cutting Saw Blade D1472CF

Freud Diablo Metal Blades Steel Demon 14 72 Tooth Cermet 2 Carbide Cermet is a composite material composed of ceramic (cer) and metallic (met) materials. Cerment II Carbide Teeth deliver 3X the life of standard carbide metal cutting blades. Steel Demon...

more >>
Ohio Power Tool
$119.99 See It
Slide Miter Saw Blade - 8 1/2 Inch, 40 Tooth, General Purpose, Model D0840S

This Diablo General Purpose Finishing 8 1/2in., 40 Tooth Circular Saw blade is ideal for smooth finish crosscuts in hardwood, softwood or plywood. Diablo Finish blades are the perfect choice for excellent rips and crosscuts using a portable saw. They... Brown

more >>
Northern Tool
$44.99 See It
Finish Circular Saw Blade - 6 1/2 Inch, 40 Tooth, Finish/Plywood, Model D0641X

Diablo Finish 6 1/2in., 40 Tooth Circular Saw blades are the perfect choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long...

more >>
Northern Tool
$24.99 See It
Slide Miter Saw Blade - 8 1/2 Inch, 60 Tooth, Fine Finish, Model D0860S

This Diablo Fine Finish 8 1/2in., 60 Tooth Circular Saw blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood and molding. Also... Brown

more >>
Northern Tool
$54.99 See It
DSP-22-2 Two Channel Detector for the DoorKing Operator Vehicle Loop Detector

OPERATION A plug-in Two Channel Vehicle detector which will operate on 18 Volts DC nominal. The Diablo  DSP-22S detector will add a new dimension of simplicity to your plug-in detector requirements.   This series of Diablo detectors are covered by United States patent number US 7,132,959 “Non-Interfering Vehicle Detection”.  These detectors are virtually crosstalk free in most applications. FEATURES Loop Size - Works on any in-ground inductive loop from 20 to 1500 microhenrys. Indicators - Separate Power/Fail and Detect LED’s for both channels. Detect Memory - Power interruptions of short duration are ignored. If power fails for approximately 1 . seconds or less the detector “remembers” a vehicle. Sensitivity and Reset Push Button - The Reset/Sens. button is used for two  functions. A short press and release of the button will reset the detector and the LED’s will both flash from 1 to 4 times, indicating the detector’s sensitivity level. The detector is shipped from the factory with the sensitivity set at level 3. If a different sensitivity level is required: Push and continue to hold the button until the LED’s start flashing - release the button immediately after the desired number of flashes.   For example, if the sensitivity is to be changed to level 2, push and hold the button until the LED’s flash twice then immediately release the button. The sensitivity level can always be verified by a quick tap on the pushbutton. This will reset the detector and flash the two LED’s indicating the present level. Level 1 - Very Low Level 2 - Low Level 3 - Normal (Factory setting) Level 4 - High   Loop Failure - The green power indicators flashes slowly if the loop circuit is open and quickly if the loop circuit is shorted. This detector will output a “Detect” for either of these loop failed conditions.   Outputs - Solid-state (open transistor collector) for Channel 1 Detect. And a SPDT - 1 Amp relay output for Channel 2.   Size - Height: 4.4” Width: 3.0” Depth: 0.8”   Connector -3 position Male for mating with the gate operator. 7-Pin Connector for external connections. 1 - Loop input for Detector #1 2 - Loop input for Detector #1 3 - Loop input for Detector #2 4 - Loop input for Detector #2 5 - Channel 2 Relay N.O. 6 - Channel 2 Relay COM 7 - Channel 2 Relay NC.   Operating Temperature - -35°F to 165°F (-37°C to 74°C)   Ordering Information: Diablo DSP-22-1 Single Channel unit Diablo DSP-22-2 Two Channel unit

more >>
Gate Openers Unlimited
$197.60 See It
Freud Diablo 9 Steel Demon Bi-Metal Recip Blade for Metal Demolition (1/8 to 1/2) (25 pk) DS0908BFD25

Freud Diablo Freud Diablo 9 Steel Demon Bi-Metal Recip Blade for Metal Demolition (1/8 to 1/2) (5 pk) DS0908BFD5 Ideal for cutting metal 3/32 to 5/16 thick Diablo steel demon reciprocating saw blades are specifically designed for maximum performance in...

more >>
Ohio Power Tool
$85.97 See It
Freud Diablo 12 60T Steel Demon Cermet 2 Carbide Ferrous Metal Cutting Saw Blade D1260CF

Freud Diablo Metal Blades Steel Demon 12 60 Tooth Cermet 2 Carbide Cermet is a composite material composed of ceramic (cer) and metallic (met) materials. Cerment II Carbide Teeth deliver 3X the life of standard carbide metal cutting blades. Steel Demon...

more >>
Ohio Power Tool
$99.96 See It
Craft Brew Collection Beer Kit, Multi-Colored

Find Barware Tools at Target.com! The Mr. Beer Craft Collection Beer Kit comes with everything you need to brew, and bottle 2 gallons of top quality beer. This kit includes the Mr. Beer Diablo IPA Refill, a two gallon beer fermenter, (11) 740ml... Multi-Colored

more >>
Target.com
$62.99 See It
DIABLO G Double Panini Grill w/ Grooved Top & Bottom, (2) 14 x 9.5-in, 208/240 V -40%

The Commercial Panini Press by Equipex: Sodir Panini Grill, cast iron top & bottom griddle plates, (2) 14W x9-1/5D grill areas, (2) ind. adjustable spring counterbalanced tops, front drip tray & scraper, grills with stainless steel construction, 570F...

more >>
KaTom
$3,000.00 $1,800.00 See It
DSP-10 Parking Detector Vehicle Loop Detector

Diablo DSP-10 Vehicle Detector The Only Loop Detector You Will Ever Need!   OPERATION The Diablo DSP-10 vehicle detector has been specifically designed to handle all parking, drive-through and access control applications.     Working on virtually any size loop, the Diablo DSP-10 automatically tunes itself to the best operating frequency. Environmental conditions are constantly compensated with the Diablo DSP-10 HYPERTRACK software.     The Diablo DSP-10 inherent noise filtering algorithms allow it to work reliably in any electrical situation. It can be used as either a safety loop or free exit loop detector. With the flexibility to be either “fail safe” or “fail secure,” it is the only parking detector you will ever need.   The Diablo DSP-10 is available in three voltage ranges: Diablo DSP-10-LV 10 to 30 Volts, AC or DC Diablo DSP-10-117 117 Volts AC Diablo DSP-10-230 230 Volts AC   With its compact size, front panel switch features, and built-in flexibility the DSP-10 is the most “user friendly” detector on the market today.   FRONT PANEL SELECTABLE SWITCHES Sensitivity - Ten sensitivity settings. Frequency – Automatically tunes within one of four operating ranges. Outputs - Two separate relay outputs with features that are front panel programmable as follows: Output A - Main detection output. Can be modified by delay and extension. Factory set to be fail safe. Fail mode operation is easily changeable by internal jumpers. Output B - Can be set to one of the following: 1) True presence (no extension or delay) 2) Pulse on vehicle entering loop 3) Pulse on vehicle exiting loop 4) Loop Fail output Sensitivity Boost - Can be used in special applications to insure complete detection of high-bed vehicles. Hold time - Normal or extended hold time is selectable. Loop failure - If the loop fails (opens or shorts) the power indicator flashes. Output B can also indicate this condition if desired (see above). The option to “remember” an intermittent loop failure is also provided. Delay - Can be selected to ignore fast moving vehicles over the loop. Extension - Extends a call for slow moving vehicles.   FEATURES Loop Size - Works on any in-ground inductive loop from 20 to 1000 uH. Fail Safe or Fail Secure Operation - Can be easily changed to either mode in the field. Power Brownout Call Memory – Power interruptions of short duration are ignored. If power fails for approximately three seconds or less the DSP-10 “remembers” a vehicle. Intelligent Power Protection – The DSP-10-LV is protected from damage if plugged into a higher voltage. No need to change a fuse or reset a circuit breaker, simply plug the detector into the proper voltage and it works. Indicators - Separate Power/Fail and Detect LEDs. Compact Size - Industry standard 11 pin connector in a small plastic case.

more >>
Gate Openers Unlimited
$112.45 See It
DSP-22-1 Single Channel Detector for the DoorKing Operator Vehicle Loop Detector

OPERATION A plug-in Two Channel Vehicle detector which will operate on 18 Volts DC nominal. The Diablo DSP-22S detector will add a new dimension of simplicity to your plug-in detector requirements.   This series of Diablo detectors are covered by United States patent number US 7,132,959 “Non-Interfering Vehicle Detection”.  These detectors are virtually crosstalk free in most applications. FEATURES Loop Size - Works on any in-ground inductive loop from 20 to 1500 microhenrys. Indicators - Separate Power/Fail and Detect LED’s for both channels. Detect Memory - Power interruptions of short duration are ignored. If power fails for approximately 1 . seconds or less the detector “remembers” a vehicle. Sensitivity and Reset Push Button - The Reset/Sens. button is used for two  functions. A short press and release of the button will reset the detector and the LED’s will both flash from 1 to 4 times, indicating the detector’s sensitivity level. The detector is shipped from the factory with the sensitivity set at level 3. If a different sensitivity level is required: Push and continue to hold the button until the LED’s start flashing - release the button immediately after the desired number of flashes.   For example, if the sensitivity is to be changed to level 2, push and hold the button until the LED’s flash twice then immediately release the button. The sensitivity level can always be verified by a quick tap on the pushbutton. This will reset the detector and flash the two LED’s indicating the present level. Level 1 - Very Low Level 2 - Low Level 3 - Normal (Factory setting) Level 4 - High   Loop Failure - The green power indicators flashes slowly if the loop circuit is open and quickly if the loop circuit is shorted. This detector will output a “Detect” for either of these loop failed conditions.   Outputs - Solid-state (open transistor collector) for Channel 1 Detect. And a SPDT - 1 Amp relay output for Channel 2.   Size - Height: 4.4” Width: 3.0” Depth: 0.8”   Connector -3 position Male for mating with the gate operator. 7-Pin Connector for external connections. 1 - Loop input for Detector #1 2 - Loop input for Detector #1 3 - Loop input for Detector #2 4 - Loop input for Detector #2 5 - Channel 2 Relay N.O. 6 - Channel 2 Relay COM 7 - Channel 2 Relay NC.   Operating Temperature - -35°F to 165°F (-37°C to 74°C)   Ordering Information: Diablo DSP-22-1 Single Channel unit Diablo DSP-22-2 Two Channel unit

more >>
Gate Openers Unlimited
$107.25 See It
DSP-10-117 Parking Detector Vehicle Loop Detector

Diablo DSP-10 Vehicle Detector The Only Loop Detector You Will Ever Need!   OPERATION The Diablo DSP-10 vehicle detector has been specifically designed to handle all parking, drive-through and access control applications.     Working on virtually any size loop, the Diablo DSP-10 automatically tunes itself to the best operating frequency. Environmental conditions are constantly compensated with the Diablo DSP-10 HYPERTRACK software.     The Diablo DSP-10 inherent noise filtering algorithms allow it to work reliably in any electrical situation. It can be used as either a safety loop or free exit loop detector. With the flexibility to be either “fail safe” or “fail secure,” it is the only parking detector you will ever need.   The Diablo DSP-10 is available in three voltage ranges: Diablo DSP-10-LV 10 to 30 Volts, AC or DC Diablo DSP-10-117 117 Volts AC Diablo DSP-10-230 230 Volts AC   With its compact size, front panel switch features, and built-in flexibility the DSP-10 is the most “user friendly” detector on the market today.   FRONT PANEL SELECTABLE SWITCHES Sensitivity - Ten sensitivity settings. Frequency – Automatically tunes within one of four operating ranges. Outputs - Two separate relay outputs with features that are front panel programmable as follows: Output A - Main detection output. Can be modified by delay and extension. Factory set to be fail safe. Fail mode operation is easily changeable by internal jumpers. Output B - Can be set to one of the following: 1) True presence (no extension or delay) 2) Pulse on vehicle entering loop 3) Pulse on vehicle exiting loop 4) Loop Fail output Sensitivity Boost - Can be used in special applications to insure complete detection of high-bed vehicles. Hold time - Normal or extended hold time is selectable. Loop failure - If the loop fails (opens or shorts) the power indicator flashes. Output B can also indicate this condition if desired (see above). The option to “remember” an intermittent loop failure is also provided. Delay - Can be selected to ignore fast moving vehicles over the loop. Extension - Extends a call for slow moving vehicles.   FEATURES Loop Size - Works on any in-ground inductive loop from 20 to 1000 uH. Fail Safe or Fail Secure Operation - Can be easily changed to either mode in the field. Power Brownout Call Memory – Power interruptions of short duration are ignored. If power fails for approximately three seconds or less the DSP-10 “remembers” a vehicle. Intelligent Power Protection – The DSP-10-LV is protected from damage if plugged into a higher voltage. No need to change a fuse or reset a circuit breaker, simply plug the detector into the proper voltage and it works. Indicators - Separate Power/Fail and Detect LEDs. Compact Size - Industry standard 11 pin connector in a small plastic case.

more >>
Gate Openers Unlimited
$112.45 See It
100m SC/SC 2-Strand OM3 50/125 Multimode Indoor/Outdoor Fiber Cable with Furcation Tubing and Pull Eye - Black

All of our 10 gigabit SC to SC fiber cables are laser optimized OM3 glass to support both LED and VCSEL laser light sources. They all provide 100% backwards compatibility to OM2 50/125 fiber applications. Use these 10GbE LC fiber jumpers for fibre channel storage applications, switch, server, cross-connects and other critical back-end needs. These are drop-in replacement cables for all OEM brand cables and fully compatible with all manufacturer brands.

more >>
Diablo Cable Inc.
$325.00 See It
DSP-15 Parking/Access Control Detector Vehicle Loop Detector

Diablo DSP-15 Vehicle Detector A single unit for all low voltages – 10 to 30 Volts AC or DC OPERATION The Diablo DSP-15 vehicle detector has been specifically designed to handle all parking, drive-through and access control applications.             Working on virtually any size loop, the Diablo DSP-15 automatically tunes itself to the best operating frequency within the selected range. Environmental conditions are constantly compensated with the Diablo DSP-15 HYPERTRACK software. The DSP-15’s inherent noise filtering algorithms allow it to work reliably in any electrical situation.             It can be used as either a safety loop or free exit loop detector. With the flexibility to be either “fail safe” or “fail secure,” it is the only parking detector you will ever need.   FEATURES Loop Size - Works on any in-ground inductive loop from 20 to 1000 mH. Fail Safe or Fail Secure Operation - Can be easily changed to either mode in the field. Indicators - Separate Power/Fail and Detect LEDs. Connector - Ten position terminal block or 10 pin male Molex connector Sensitivity - Ten sensitivity settings. Frequency - Automatically tunes within one of four operating ranges. Outputs - Two separate relay outputs with features that are switch programmable as follows: Output A - Main detection output which can be modified by delay and extension. Fail safe or fail secure operation changeable by PCB jumper. NOTE: Units are shipped in the Fail Safe mode. Output B – Switch selectable to one of the following four options: 1) True presence (no extension or delay) 2) Pulse on vehicle entering loop 3) Pulse on vehicle exiting loop 4) Loop Fail output Sensitivity Boost - Can be used in special applications to insure complete detection of high-bed vehicles. Hold Time - Normal or extended hold time is selectable. Loop Failure - If the loop fails, opens or shorts, the power indicator flashes. Output B can also indicate this condition if desired (see above). The option to “remember” an intermittent loop failure is also provided. Delay - Can be selected to ignore fast moving vehicles over the loop. Extension - Extends a call for slow moving vehicles. Sensitivity - Experience has shown that almost all parking and access control applications can be handled with sensitivity set at NORMAL (level 5). The rotary sensitivity switch is rarely moved from NORMAL. However, the DSP- 15 has ten sensitivity settings varying from LOW (level 0) to HIGH (level 9).

more >>
Gate Openers Unlimited
$115.50 See It
DSP-7 Microdetector Vehicle Loop Detector

OPERATION The Diablo DSP-7LP vehicle detector has been specifically designed for solar powered gate applications specifically for “fail safe” operations, such as on safety loops. This detector will operate on any voltage from 10 to 30 Volts AC or DC and draws approximately 1 milliampere while waiting for a car. Thepower LED winks continuously once per second to indicate the detector is operating in the low power mode. The Diablo DSP-7LP detector has many of the same features as our standard Diablo DSP-7 but beats all competition for reliability, simplicity, and “no car”current consumption. This series of Diablo’s detectors are covered by United States patent number US 7,132,959“Non-Interfering Vehicle Detection". These detectors are virtually crosstalk free in most applications. Working on battery-powered and other parking and access control loop applications, the Diablo DSP-7LP is preset to the normal sensitivity level used in parking/access control applications, and tunes itself to the best operating frequency. This micro-sized detector will automatically adjust its sensitivity level when used on different sized loops. Environmental conditions are constantly compensated with the Diablo DSP-7LP’s HYPERTRACK software.FEATURESLoop Size - Works on any in-ground inductive loop from 20 to 1200 μH.Indicators - Separate Power and Detect LED’s. The green Power LED will wink continuously once per second under normal operation. The red Detect LED will turn on solid for a vehicle.Sensitivity - Automatic - compensates for large loops and large lead-ins.Output Ratings - Single output, 1 amp relay at 30 VDCResistive - The relay common, NO, and NC contacts are available.Loop Failure - The green power indicator flashes twice per second if the loop circuit is open and 10 times per second if the loop circuit is shorted. This detector operates in the fail safe mode and will output a “Detect”for either of these loop failure conditions. This “Fail safe” detector should be used on “safety” loops. Power - 10 to 30 Volts AC or DC. Approximately 1 mA (no car and all loop sizes) and less than 25 mA with a car on the loop or while in a “Fail”conditionSize - Height: 1.52” Width: 2.9” Depth: 1.56”Connector - Removable 7-pin terminal block. Pin assignments are shown below - from left to right:1 - Relay (NC) (opens for detect)2 - Relay Common3 - Relay (NO) (closes for detect)4 - Power Common5 - Power in (10 to 30 Volts AC or +DC)6 - Loop7 - Loop Operating Temperature - -35°F to 165°F (-37°C to 74°C)

more >>
Gate Openers Unlimited
$108.95 See It
DSP-11-117 Microdetector Vehicle Loop Detector

OPERATION   The Diablo DSP-11 Vehicle is a simple, switchless vehicle detector available with the industry standard 11-pin base. Two models for your complete 11-pin vehicle detector needs: ・ The Diablo DSP-11-LV which will operate on any voltage ・ and any polarity from 10 to 30 Volts AC or DC. ・ The DSP-11-117 operates on 117 VAC lines.     This series of Diablo’s detectors are covered by United States patent number US 7,132,959 “Non-Interfering Vehicle Detection”. These detectors are virtually crosstalk free in most applications and have been specifically designed to handle parking, drive-through and access control applications.   FEATURES Loop Size - Works on any in-ground inductive loop from 20 to over 1500 mH. Indicators - Separate Power/Fail and Detect LEDs. Detect Memory - Power interruptions of short duration are ignored. If power fails for approximately 1. seconds or less the detector “remembers” a vehicle. Sensitivity - Automatic - compensates for large loops and long lead-ins. Output Relay - 1A at 125VAC General use, 1A at 30 VDC resistive. Both N.O. (closes for detect) and N.C. (opens for detect) outputs. Loop Failure - The green power indicator flashes slowly if the loop circuit is open and quickly if the loop circuit is shorted. This detector will output a “Detect” for either of these loop failed conditions. Model Types Diablo DSP-11-LV - Low voltage version 10 to 30 Volts AC or DC Diablo DSP-11-117 - Medium voltage version for 117 Volts AC Fail Safe Operation - The DSP-11 series of detectors are designed to be “Fail Safe” in their operation.  The detector will output a “Detect” (contact closure) for a “Failed”loop condition OR a loss of power  to the detector. This “Fail Safe” detector should always be used on “safety” loops. Connector - Standard 11-pin (Amphenol 86CP11) Pin assignments are: Pin 1 (black wire) - Power in (See model type) Pin 2 (white wire) - Power in (See model type) Pin 5 (yellow wire) - Output relay common Pin 6 (blue wire) - Output relay N.O. - (closes for detect) Pin 7 (gray twisted wire) - Loop input Pin 8 (brown twisted wire) - Loop input Pin 10 (pink wire*) - Output relay N.C. - (opens for detect) *This wire is black (with white) on some harnesses. Operating Temperature - -35°F to 165°F (-37°C to 74°C) Size - Height: 1.4” Width: 1.4” Depth: 2.75” overall

more >>
Gate Openers Unlimited
$102.00 See It
DSP-11-LV Microdetector Vehicle Loop Detector

OPERATION   The Diablo DSP-11 Vehicle is a simple, switchless vehicle detector available with the industry standard 11-pin base. Two models for your complete 11-pin vehicle detector needs: ・ The Diablo DSP-11-LV which will operate on any voltage ・ and any polarity from 10 to 30 Volts AC or DC. ・ The Diablo DSP-11-117 operates on 117 VAC lines.     This series of Diablo’s detectors are covered by United States patent number US 7,132,959 “Non-Interfering Vehicle Detection”. These detectors are virtually crosstalk free in most applications and have been specifically designed to handle parking, drive-through and access control applications.   FEATURES Loop Size - Works on any in-ground inductive loop from 20 to over 1500 mH. Indicators - Separate Power/Fail and Detect LEDs. Detect Memory - Power interruptions of short duration are ignored. If power fails for approximately 1. seconds or less the detector “remembers” a vehicle. Sensitivity - Automatic - compensates for large loops and long lead-ins. Output Relay - 1A at 125VAC General use, 1A at 30 VDC resistive. Both N.O. (closes for detect) and N.C. (opens for detect) outputs. Loop Failure - The green power indicator flashes slowly if the loop circuit is open and quickly if the loop circuit is shorted. This detector will output a “Detect” for either of these loop failed conditions. Model Types DSP-11-LV - Low voltage version 10 to 30 Volts AC or DC DSP-11-117 - Medium voltage version for 117 Volts AC Fail Safe Operation - The DSP-11 series of detectors are designed to be “Fail Safe” in their operation.  The detector will output a “Detect” (contact closure) for a “Failed”loop condition OR a loss of power  to the detector. This “Fail Safe” detector should always be used on “safety” loops. Connector - Standard 11-pin (Amphenol 86CP11) Pin assignments are: Pin 1 (black wire) - Power in (See model type) Pin 2 (white wire) - Power in (See model type) Pin 5 (yellow wire) - Output relay common Pin 6 (blue wire) - Output relay N.O. - (closes for detect) Pin 7 (gray twisted wire) - Loop input Pin 8 (brown twisted wire) - Loop input Pin 10 (pink wire*) - Output relay N.C. - (opens for detect) *This wire is black (with white) on some harnesses. Operating Temperature - -35°F to 165°F (-37°C to 74°C) Size - Height: 1.4” Width: 1.4” Depth: 2.75” overall

more >>
Gate Openers Unlimited
$102.00 See It
DSP-6LP Microdetector Vehicle Loop Detector

OPERATION   The Diablo DSP-6LP vehicle detector is designed for solar powered gate applications. This loop detector will operate on any voltage from 10 to 30 Volts AC or DC and draws approximately 1 milliampere while waiting for a car. The power LED winks continuously once per second to indicate the detector is operating in the low power mode.   The Diablo DSP-6LP detector beats all competition for reliability, simplicity, and “no car” current consumption. This series of Diablo Loop detectors are covered by United States patent number US 7,132,959 “Non-Interfering Vehicle Detection”. These detectors are virtually crosstalk free in most applications.   Working on battery-powered and other parking and access control loop applications, the Diablo DSP-6LP is preset to the normal sensitivity level used in parking/access control applications, and tunes itself to the best operating frequency.   This micro-sized detector will automatically adjust its sensitivity level when used on different sized loops. Environmental conditions are constantly compensated with the Diablo Control DSP-6LP  HYPERTRACK software. Environmental conditions are constantly compensated with the DML-9LP’s HYPERTRACK software. FEATURES Loop Size - Works on any in-ground inductive loop from 20 to 1200 mH. Indicators - Separate Power and Detect LED’s. The green Power LED will wink continuously once per second under normal operation. The red Detect LED will turn on solid for a vehicle. Sensitivity - Automatic - compensates for large loops and large lead-ins. Output Ratings - Single output, 1 amp relay at 30 VDC Resistive - The relay common, NO, and NC contacts are available. Ordering Information – DSP-6LP standard version. Power - 10 to 30 Volts AC or DC. Approximately 1 mA (no car and all loop sizes) and less than 25 mA with a car on the loop. Size - Height: 1.52” Width: 2.9” Depth: 1.56”   Connector - Removable 7-pin terminal block. Pin assignments are shown below -from left to right: 1 - Relay (NC) (opens for detect) 2 - Relay Common 3 - Relay (NO) (closes for detect) 4 - Power Common 5 - Power in (10 to 30 Volts AC or +DC) 6 - Loop 7 - Loop   Operating Temperature -35°F to 165°F (-37°C to 74°C)

more >>
Gate Openers Unlimited
$108.95 See It
DSP- 50 Plug-in Vehicle Loop Detector

FEATURES The Diablo DSP-51AT detector can be configured to provide an output for tailgating vehicles or as an accurate vehicle counter. The detector has enhanced Anti-Tailgating features that allow the end user to select the allowed number of vehicles through a secured access. The enhancements are not only for tailgating but also for providing an accurate vehicle count output as a secondary feature. The Diablo DSP-51AT was designed for use with current typical loop configurations and sizes used throughout the industry. The simplicity of the set-up and operation allows the end user to implement the detector without special training devices.   OPERATION The Diablo DSP-51AT is mainly a standard vehicle loop detector. But that’s where the similarity ends. Its built-in secondary functions are exclusive anti-tailgating and vehicle counting software. The two modes are selectable from a front panel DIP switch. In the anti-tailgate mode, the software compares the signature versus the number of legal vehicles input. If there is any discrepancy, the secondary output is enabled indicating a tailgating incident. In the counting mode, the secondary output is pulsed once for every vehicle entering the loop system based on a proprietary signature algorithm.   FRONT PANEL SELECTABLE SWITCHES SENSITIVITY SWITCH This detector has a 10 position rotary sensitivity switch. The unit is shipped in the “5” position which is the normal sensitivity level. Sensitivity can be adjusted up and down from this level to accommodate different street loops.   FUNCTION SWITCHES The detector has a 6-position DIP switch to incorporate the following functions. DIPSWITCHES 5 and 6 – Frequency One of four operating frequencies can be selected by changing these two switches. DIPSWITCH 4 – Failure Operation OFF = Fail Safe operation. ON = Fail Secure operation. DIPSWITCH 3 – Failure Output Polarity OFF = Fail output low indicates loop failure ON = Fail output high indicates loop failure DIPSWITCH 2 – Operating Mode OFF = Anti-Tailgating Operation ON = Counter Operation DIPSWITCH 1 – Anti-Tailgating Test Toggle switch to indicate number of vehicles in inbound queue.   INDICATORS   Green LED solid ON is power OK. Fast blink = “Shorted” loop. Slow blink = “Open” loop circuit.   Red LED's OFF = No Detect. ON = Detect   Blue LED On = Output B On   Yellow LED OFF = Unarmed. ON = AT armed   Outputs - Three separate solid state (normally open collector) outputs – 30 milliamps maximum and 20volts maximum. Output pins – (looking into the connector – Right to left.) 1 Loop 2 Loop 3 Power input “+” 4 N/C 5 /AT input 6 Output B 7 Fail 8 Output A 9 Power input “+” 10 Power (and logic) Common Operating Temperature - -35°F to 165°F (-37°C to 74°C)   Power - 10 to 30 Volts D.C. ( 30 mA. max at 12 volts)   Enclosure - Impact resistant, high temperature plastic. H - 2.375” (60.4 mm) W – 0.86” (22 mm) D -2.25 ” (58mm)

more >>
Gate Openers Unlimited
$108.25 See It
Search within results
  • Find by Price
    • $ to $

Popular queries