M260 In-Hull 1kW Transducer with No ConnectorIn-hull features, thru-hull performance. Setting the In-Hull StandardIt's true! Excellent performance can be achieved from an in-hull mounted transducer. The M260, Airmar's 1 kW in-hull, is designed with Airmar's exclusive Broadband Ceramic Technology. The 200 kHz element providesbroadband performance resulting in higher resolution without sacrificing sensitivity. Combined with a seven-element 50 kHz array, this in-hull has excellent.All-Out Fishfinding Performance!Optimal fishfinder performance no longer requires drilling a hole in the hull! The M260 is able to transmit and receive through solid fiberglass while displaying sharp detailed images. Track the bottom at speeds exceeding 30 knots! Installation simply requires adhering the tank to the inside of the vessel, leaving a clean and smooth hull exterior!FeaturesM260 Transducer with In-Hull Kit 1,000 Watts Power 50/200 kHz w/Diplexer 19/6 degree Beam AnglesInterfaces to any 600W or 1kW echosounderRecommended for solid fiberglass hullsInnovative tank design allows for bow-stern or port-starboard mountingAvailable with a diplexer for single transmission line fishfinders and without a diplexer for dual transmission line fishfindersMineral oil or non-toxic anti-freeze (propylene glycol) is used to fill the tankTransducer ID™ feature
P79, In-Hull Mount Smart Transducer, NMEA 2000Our in-hull mount smart transducer provides depth data to your NMEA 2000® network. This transducer has an operating frequency of 235 kHz and a beamwidth of 11°. It accommodates deadrise angles of up to 22°.
Plastic In-Hull Mount Transducer w/Depth - Airmar M265LHPart #: 010-11644-20Our best performing and only 1 kW in-hull, this narrow beam transducer provides crisp image detail.The bare wire transducer has a depth of 3,000 ft; an operating frequency of 42 to 65 kHz and 130 to 210 kHz; a beamwidth of 16 to 25 degrees or 6 to 10 degrees; and a 0 to 30 degree deadrise.Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.*Not recommended for cored-hull vessels.
Airmar 1kW M260 200/50kHz Plastic In-hull Transducer (8-pin)010-10641-20Our plastic in-hull mount transducer provides depth data. This transducer has an operating frequency of 50 or 200 kHz and mounts on a 0-25° deadrise angle.
P79 Plastic In-Hull Transducer, 600w (10-Pin)600 Watts 50/200 kHz 45/15 degree Beam Angles Plastic In-Hull Mount for Shoot-Through Applications 30 Foot Cable with 10-Pin Connector
Urethane In-Hull Transducer, 1kW (10-pin), BroadbandThe 527ID-IHD is an in-hull transducer utilizing Broadband Technology.M260 Transducer with In-Hull Kit 1,000 Watts Power 50/200 kHz w/Diplexer 19/6 degree Beam Angles Plastic Transducer with In-Hull Mounting Kit 10-Pin Connector
M260 In-hullThe M260 is our high performance in-hull model for 300 W-1 kW echosounders. Its construction utilizes separate 50 kHz and 200 kHz elements for excellent deep-water performance and exceptional bottom and water column detail. The M260s narrow beam provides crisp image detail especially suited for fishing shelves, intricate bottom structures and wrecks. In-hull mounting eliminates cavitation and turbulence under the transducers face resulting in precise readings even at boat speeds above 20 knots.Features:Depth50/200 kHz1 kW RMSHigh-performanceUrethane
Single/Down-Imaging, 200kHz + 455/800 kHz, Temp, In-Hull Mounting Epoxy Kit