1 to 20 of  100 products for remington 870 tactical upgrade kits rem 870 stock and forend upgrade kit

No exact matches found for remington 870 tactical upgrade kits rem 870 stock and forend upgrade kit

100 similar items found

Remington 870/Mossberg 500 Telescoping Stock Conversion Kit - Leo Recoil Reducing Stock Kit, Rem 870 -15%

Bolt-on replacement stock gives your Remington 870 the control and adaptability of a collapsible M4 carbine stock. Telescoping, five position buttstock allows fast length-of-pull adjustment to adapt to body armor and heavy tactical clothing. Aluminum receiver adapter bolts to rear of receiver with included mounting hardware and requires no permanent alterations to your gun. Accepts the included M4 SOPMOD buttstock or any aftermarket stock that fits a mil-spec (1.14" O.D.) buffer tube. Hogue overmolded rubber pistol grip with palm swells and finger grooves bolts solidly to the receiver adapter to reduce recoil shock and give the shooter better control. Basic LEO (Law Enforcement) mode Mfg: Mesa Tactical Products, Inc. SPECS: Receiver Adapter & Extension Tube A-356 T6 aluminum, hardcoat anodized, dark gray, matte finish. Enidine Absorber Aluminum housing, anodized, black; steel internal components. Buttstock Molded polymer, matte black. Pistol Grip Fiberglass core overmolded

more >>
Brownells
$272.99 $232.99 See It
Remington 870/Mossberg 500 Telescoping Stock Conversion Kit - Leo Stock Kit Recoil Reducing, Moss 500 12 Gauge Only

Bolt-on replacement stock gives your Remington 870 the control and adaptability of a collapsible M4 carbine stock. Telescoping, five position buttstock allows fast length-of-pull adjustment to adapt to body armor and heavy tactical clothing. Aluminum receiver adapter bolts to rear of receiver with included mounting hardware and requires no permanent alterations to your gun. Accepts the included M4 SOPMOD buttstock or any aftermarket stock that fits a mil-spec (1.14" O.D.) buffer tube. Hogue overmolded rubber pistol grip with palm swells and finger grooves bolts solidly to the receiver adapter to reduce recoil shock and give the shooter better control. Basic LEO (Law Enforcement) mode Mfg: Mesa Tactical Products, Inc. SPECS: Receiver Adapter & Extension Tube A-356 T6 aluminum, hardcoat anodized, dark gray, matte finish. Enidine Absorber Aluminum housing, anodized, black; steel internal components. Buttstock Molded polymer, matte black. Pistol Grip Fiberglass core overmolded

more >>
Brownells
$281.99 See It
UAS870 Tactical Folding Buttstock with Cheek Piece for Remington 870

Mako Tactical Folding Buttstock with Cheek Piece for your Remington 870. Folding convenience meets tactical excellence! Folding mechanism makes for easy carrying and deployment. Adjustable-height cheek riser allows for optimal cheek weld. It adds up to a BIG performance boost for your 870, courtesy of Mako!Pistol grip features: Made from reinforced composite for the utmost in all-season reliability Rock-solid, one-piece ergonomic design Non-slip for dependable grip Includes a storage compartment for batteries, cleaning kit, etc. Installs easily, no gunsmith required. Tactical stock features:Slim, low-profile design Rubber butt plate for reducing recoil and slippage Integrated adjustable cheek piece Allows for trigger clearance in the folded position. Tactical folding joint features:Push-button locking release Mountable for right or left-side folding.

more >>
The Sportsman Guide
$149.99 See It
Remington 870 Triple Rail Forend - Rem 870 Triple Rail Forend

High-density, lightweight polymer forearm features three MIL-STD 1913 Picatinny rails positioned at the 3-, 6-, and 9- o'clock positions for mounting a variety of tactical accessories. Features a full length, fixed rail on the bottom with plenty of space to accommodate both a vertical grip and offset light mount. Two, ultra-compact front side rails are just the right size for an additional light or laser mount and easily remove with an Allen wrench if not needed. Hand-filling, pump slide with embossed sides provides a comfortable, non-slip textured surface that grips your hand when shooting and cycling rounds. Available for Remington 870, 12 gauge only. Mfg: Command Arms Acc SPECS: High-density polymer composite, black. 8" (20cm) long x 2-1/8" (5.4cm) wide. 7 oz. (198g) weight. Fits Rem. 870, 12 gauge only.

more >>
Brownells
$54.00 See It
Overmolded Shotgun Stock & Forend Sets - Rem. 870 Stock/Forend Set, 12ga.

Fiberglass-reinforced, polymer, shotgun stock provides synthetic-stock durability and is overmolded with rubber for a sure grip every time you grab your gun. Rubber is pebble-textured in the gripping areas. Includes recoil-cushioning, butt pad and an integral, sling-swivel stud. Available in standard, factory length of pull or in ShortShot, 12" length of pull for use with body armor or for smaller shooters. Available in sets or individually. Sets and individual components fit 12 gauge only. Mfg: Hogue SPECS: Polymer stock; rubber overmolded. Standard stocks match factory dimensions and length of pull. Stock sets and components fit 12 gauge only. ShortShot stocks have a 12" length of pull. Mossberg Forend Adapter Nut required for Mossberg 500/835 with 6¾" forend tubes.

more >>
Brownells
$52.86 See It
Remington/Mossberg Forend Wrench - 870 Wrench, 12 Ga.

Wrench adapted from Remington factory design, with pilot that keeps "teeth" square to the forend nut, virtually eliminating damage to wrench, forend or forend nut. But, if one of the wrench teeth should ever break, turn the "sleeve" around, there's another set. Models for Rem. 870 or Mossberg 500. Mfg: Brownells SPECS: Steel. 12 Gauge 6¾" (17.1cm) long overall. 5" (12.7cm) long handle. 20 Gauge 7-7/8" (20cm) long overall. 5" (12.7cm) long handle. Replacement Sleeve for 12 gauge only; sold 1 each.

more >>
Brownells
$50.99 See It
Remington/Mossberg Tamer Pistol Grip & Forend - Moss. Tamer Grip & Forend

Comfortable, rubber over-molded pistol grip and forend provide maximum performance and recoil control in all types of shooting scenarios. Advanced Tamer technology features an internal Sorbothane cushion that helps dampen felt recoil in the web of the hand. Pistol grip design includes dual palm swells and equally proportioned finger grooves, allowing both right- and left-handed operators to shoot with confidence. Pebble textured rubber surface provides a firm grip even when wet. Models available for Remington 870, Mossberg 500, 590, and 835. Rem. model includes 1-1/8" wide sling loop molded into pistol grip Mfg: Hogue SPECS: Molded polymer, overmolded rubber, black. Rem. - Forend is 7½" (19cm) long, 1¾" (4.4cm) wide, 1¾" (4.4cm) high. Grip - 6" (15.2cm) long. Mossberg - Forend is 7¾" (19.7cm) long, 1-7/8" (4.7cm) wide, 1¾" high. Gri

more >>
Brownells
$30.19 See It
Remington 870 Overrubber Shotgun Stock Kit with Forend -29%

On sale: 29% off

Hogue's Overmolded Shotgun Stock Kit is the perfect upgrade for your Remington 870 shotgun. OverMolding provides the ultimate in a comfortable, non-slip, super smooth attractive finish that is durable and extremely quiet, and the exclusive

more >>
Sears
$69.94 $49.99 See It
Remington/Mossberg Tamer Pistol Grip & Forend - Rem. Tamer Grip & Forend

Comfortable, rubber over-molded pistol grip and forend provide maximum performance and recoil control in all types of shooting scenarios. Advanced Tamer technology features an internal Sorbothane cushion that helps dampen felt recoil in the web of the hand. Pistol grip design includes dual palm swells and equally proportioned finger grooves, allowing both right- and left-handed operators to shoot with confidence. Pebble textured rubber surface provides a firm grip even when wet. Models available for Remington 870, Mossberg 500, 590, and 835. Rem. model includes 1-1/8" wide sling loop molded into pistol grip Mfg: Hogue SPECS: Molded polymer, overmolded rubber, black. Rem. - Forend is 7½" (19cm) long, 1¾" (4.4cm) wide, 1¾" (4.4cm) high. Grip - 6" (15.2cm) long. Mossberg - Forend is 7¾" (19.7cm) long, 1-7/8" (4.7cm) wide, 1¾" high. Gri

more >>
Brownells
$31.99 See It
Moe Shotgun Forend - Moe Forend Mossberg 590/590a1

Innovative, integrated accessory system lets you apply the "Magpul Method" to make the tried-and-true 12 gauge 870 into a state-of-the-art tactical shotgun exactly fitted to your mission requirements. Major components are made from the same tough, hard polymer Magpul uses for their AR-15 stocks to ensure superb durability under harsh conditions. Drop-in replacement forend extends the comfort and enhanced control of Magpul's proven AR-15/M16 MOE forend to the 870 platform. Offers extra length, plus front and rear hand stops for easier cycling. Accepts all add-on accessories for the MOE forend, including the MVG vertical grip and the Scout Mount (sold separately). The Mfg: Magpul SPECS: Reinforced, hard-molded polymer, Black, Dark Earth, Gray, or Orange. Remington fits 12 gauge Remington 870 - NOT compatible with the 870 Supermag. Mossberg fits Mossberg 500/590/590A1 lines of 12 gauge shotguns with the 7-5/8" action tube assemblies - it will NOT fit the Mossberg 500

more >>
Brownells
$28.45 See It
Remington 700 Varmint/Tactical Stock - Rem 700 Sa V/T Stock

Fully adjustable, composite stock with integral bedding block creates a rock solid, custom fit platform that helps produce consistent accuracy from your Remington 700 short action rifle. A combination of advanced composite materials are hand-laid and bonded to a machined, aluminum pillar bedding block to produce a high strength stock with a solid, textured feel. Cheek piece provides up to 15/8'''' vertical adjustment for precise eye alignment with your scope. Pachmayr buttpad is adjustable for left/right cant , 1¾'''' length-of-pull, plus ¾'''' up and 27/8'''' down. Beavertail forearm features a 23/8'''' wide flat bottom with 7½'''' long, dovetailed rail and swivel stud thats adjustable front-to-rear. Mfg: Bell & Carlson SPECS: Composite over machined aluminum block, textured finish, black. Approx. 32 (81cm) long, 2-3/8'''' (5.8cm) wide, 6½ (16.5cm) high. 5.4 lb. (2.5kg) weight. Fits Rem 700 short actions with factory heavy barrel and hinged floor plate.

more >>
Brownells
$549.99 See It
Receiver Mount Shotshell Holder - Sm 6-Round Shotshell Holder Fits *rem 870/1100/11-87

Rugged and lightweight, aluminum shell holders put extra 12 gauge shotshells on the left side of the receiver for fast tactical reloads. Shells are held in place with a unique, internal Santoprene elastomer rib that securely retains even heavy slug shells during vigorous movement or heavy recoil. Available in sidemount (SM) or Picatinny rail (PR) configurations. All necessary installation hardware, tools, and instructions included. Remington Sidemount is available in 4-, 6-, and 8-round capacities and uses steel-on-steel, threaded adapters that replace the trigger group pins to anchor the shell holder securely to the receiver. Remington 870 shotguns re Mfg: Mesa Tactical Products, Inc. SPECS: 6061 T6 aluminum, anodized, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Right Hand models only. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 4-Round Sidemount 5¼&

more >>
Brownells
$64.99 See It
Remington 700 Light Tactical Stock - Rem 700 Sa Light Tactical Stock -10%

Composite stock with integral bedding block creates a rock solid, custom fit platform that helps produce consistent accuracy from your Remington 700 short action rifle. A combination of advanced composite materials are hand-laid and bonded to a machined, aluminum pillar bedding block to produce a high strength stock with a solid, textured feel. Features an innovative buttstock with J-hook cutout to fit the off-hand for increased shoulder support and a relaxed trigger pull. Beavertail forearm features a 2" wide flat bottom with dual front sling studs to allow both bipod and sling attachment. Accepts oversized front lugs. Right Hand only. Mfg: Bell & Carlson SPECS: Composite over machined aluminum block, textured finish, black. Approx. 32" (81cm) long, 2" (5.1cm) wide, 5" (12.7cm) high. 2.5 lb. (1.1kg) weight. Fits Rem. 700 short actions with factory heavy barrel and hinged floor plate. LOP 13.75".BDL style stock. Right ha

more >>
Brownells
$289.99 $259.99 See It
Remington 870 Forend/Polymer & Aluminum -5%

AIM Sports Remington 870 Shotgun Forend is made with a polymer body and black anodized aircraft grade aluminum rails. This forend accepts all standard Weaver /Picatinny 1913 accessories. It will fit most Remington model 870 shotguns, and requires no

more >>
Sears
$65.00 $61.75 See It
Remington 870 Recoil Reducing Folding & Collapsible Buttstock - Remington 870 Collapsible Folding Recoil Reducing Stock

Modular, folding, collapsible butt stock & pistol grip for the Remington 870 shotgun. The stock features a patented recoil-compensating system for unparalleled recoil reduction. Rugged adapter design features streamlined hinge. Stock is locked in the open position by a robust claw. A button releases lock and allows the stock to fold. Spring tension holds stock in folded position, ensuring a rattle free and rigid lockup. System is completely ambidextrous and can be switched to fold left or right. Storage compartments in grip and in butt stock. Collapsible butt stock is the GLR-16, with battery storage and rubber recoil pad, adjustable to five p Mfg: The Mako Group SPECS: Fits: Mossberg 500/590 shotguns. Weight 1 lb 12.54 oz. Width 1.85". Height 5.59". Length 13.9".

more >>
Brownells
$253.00 See It
Ak-47 Tactical Upgrade Kit

Easy-to-install, accessories make your AK-pattern rifle more comfortable to shoot and easier to handle and with AR-15 style accessories. Kits include all necessary mounting hardware and instructions. Tactical Upgrade Kit features a Midwest Industries quad-rail handguard with Picatinny rails in the 3, 6, 9 and 12 o'clock positions and a Vltor stock adapter that accepts the kit's Magpul MOE AR-15 buttstock. The MOE features a wide comb that helps you maintain a solid, stable cheekweld. Five-position length-of-pull adjustment. The US Palm Battle Grip has an ergonomic shape and aggressive, non-slip texturing for a secure, comfortable grasp and better weapon control. Counts as thre Mfg: Brownells SPECS: Handguard - 6061 T6 aluminum, hardcoat anodized, black. 6" (15.2cm) long, 21/8" (5.3cm) wide. 10 oz. (280g) wt. Stock Adapter - Aluminum, hardcoat anodized, black. 8" (20.3cm) long. Fits AK-47/AKM/AKS rifles with stamped receivers, except the Yugo RPK and Iraqi Tabuk.

more >>
Brownells
$289.99 See It
Remington 870 Tactical Response Magazine Follower - Remington 870 Magazine Follower, 12 Ga.

Fluorescent green, combat-style follower with projection on the head, instantly shows by sight, or by touch, if mag is empty. Molded from non-rusting, high-impact grade ABS with tapered tail to help prevent magazine spring bind and improve reliability. Mfg: Scattergun Technology SPECS: 1.7'''' (4.5cm) long, .91'''' (23mm) diameter. 12 ga. only. Fits Remington 870, 1100 and other miscellaneous shotguns with no detents in magazine tube.

more >>
Brownells
$8.99 See It
MESA LEO RECOIL STOCK KIT REM 870

Mesa TacticalAccessories: Features a lowered stock elevation allowing the use of iron sights or even the bead sight. Attribute Description:Includes LEO Stock Adapter, Enidine Recoil Buffer, Standard A2 Collapsible Stock, and Hogue GripFinish/Color: BlackFit: Reminton 870 12GaManufacturer: Mesa TacticalManufacturer part #: 92230Model: LEO Recoil Stock Kit

more >>
Sportsman's Logistics
$275.64 See It
Remington 870/1100/11-87 Extended Magazine Tube, Qd Stud - Remington 870/1100/11-87 Ext Mag Tube,Left-Side Loop, 2rds

Machined steel magazine extensions increase capacity without gunsmithing or permanent alterations to your Remington 870, 1100 or 11-87 shotgun. Knurled, threaded collar screws onto the end of the mag tube. Includes high-performance, extended length magazine spring and an unbreakable, high-visibility, nylon follower. Loop models features a stationary loop on the left side of the extension to accept direct attachment of tactical-style slings without swivels. QD stud models include a quick-detach, swivel stud mounted either in the center of the magazine cap or at the front of a plate below the extension to accept slings with quick-detach swivels. All models fit 12 gauge only. Mfg: Scattergun Technology SPECS: Steel, gray parkerized finish. Fits Remington 870/1100/11-87, 12 ga. only. 1-Shot - 2" (5cm) long, 2-Shot - 6" (15.2cm) long.

more >>
Brownells
$44.99 See It
Shotgun Sga Stocks - Mossberg 500/590 Sga Stock Blk

Innovative, integrated accessory system lets you apply the "Magpul Method" to make the tried-and-true 12 gauge 870 into a state-of-the-art tactical shotgun exactly fitted to your mission requirements. Major components are made from the same tough, hard polymer Magpul uses for their AR-15 stocks to ensure superb durability under harsh conditions. SGA Stock User-configurable stock offers improved ergonomics, including a spacer system that lets you tailor the length of pull to the individual shooter in ½" increments from 12½" to 14½". Ergonomically enhanced grip area is similar to a pistol grip and a recoil-absorbing butt Mfg: Magpul SPECS: Reinforced, hard-molded polymer, Black, Dark Earth, Gray, or Orange. Fits 12 gauge Remington 870 only. Mounting hardware and instructions included.

more >>
Brownells
$104.45 See It
Search within results
  • Find by Price
    • $ to $