1 to 20 of  20 products for remington model 700

Result for "remington model 700"
Sinclair Firing Pin Removal Tool For Remingtons - Sinclair Firing Pin Removal Tool For Remington's

Save 7.5% with coupon code: G4H

Our bolt disassembly tool makes removing the firing pin, spring and shroud assembly from the bolt body an easy task. This tool fits the 40X, 600, 660, Model, 7, XP-100, 700, 721, XR-100 and 722 actions plus the Kelbly Stolle actions. Does not work for 40X rimfire actions. This tool is designed to pull back and hold the cocking piece as the shroud, pin and spring assembly is unscrewed from the bolt body. This needs to be done to clean the assembly and apply new light oil several times a year. The bolt should also be disassembled and inspected if a primer cup may need to be removed from the bolt body. The tool has a non-marring Delrin body and is very easy and fast to use. Most co Mfg: Sinclair International

more >>
Brownells
$29.99 See It
Small 700 Sa Receiver, Blued - Magnum 700 La 300 Ultra Magnum Receiver, Ss

Save 7.5% with coupon code: G4H

Remington Arms Company, LLC (“Remington”) is voluntarily recalling Remington Model 700™ and Model Seven™ rifles which were manufactured from May 1, 2006 through April 9, 2014 and which have an X-Mark Pro® (“XMP®”) trigger. View more information on this recall. Boxes may show signs of handling due to the Remington trigger recall, the action/receiver is a new item and the trigger has been examined by Remington. 700 SHORT & LONG ACTION RECEIVERS It’s been many years since Brownells has been able to offer the legendary Remington 700 action in our catalog (since #58 to be exact!). The problem has been unsteady supply: Remington Mfg: Remington SPECS: Receiver/Bolt - Carbon steel, blued finish (CS), or stainless steel, natural finish (SS). 1-1/16"-16 tpi thread. Bolt not equipped with Integrated Security System (ISS). X-Mark Pro Trigger - Steel, electroless nickel plated finish. Includes trigger lock and owner’s man

more >>
Brownells
$529.99 See It
Small 700 Sa Receiver, Blued - Remington 700 Lh Short Action Bolt

Save 7.5% with coupon code: G4H

Remington Arms Company, LLC (“Remington”) is voluntarily recalling Remington Model 700™ and Model Seven™ rifles which were manufactured from May 1, 2006 through April 9, 2014 and which have an X-Mark Pro® (“XMP®”) trigger. View more information on this recall. Boxes may show signs of handling due to the Remington trigger recall, the action/receiver is a new item and the trigger has been examined by Remington. 700 SHORT & LONG ACTION RECEIVERS It’s been many years since Brownells has been able to offer the legendary Remington 700 action in our catalog (since #58 to be exact!). The problem has been unsteady supply: Remington Mfg: Remington SPECS: Receiver/Bolt - Carbon steel, blued finish (CS), or stainless steel, natural finish (SS). 1-1/16"-16 tpi thread. Bolt not equipped with Integrated Security System (ISS). X-Mark Pro Trigger - Steel, electroless nickel plated finish. Includes trigger lock and owner’s man

more >>
Brownells
$519.99 See It
Small 700 Sa Receiver, Blued - Standard 700 La Receiver, Blued

Save 7.5% with coupon code: G4H

Remington Arms Company, LLC (“Remington”) is voluntarily recalling Remington Model 700™ and Model Seven™ rifles which were manufactured from May 1, 2006 through April 9, 2014 and which have an X-Mark Pro® (“XMP®”) trigger. View more information on this recall. Boxes may show signs of handling due to the Remington trigger recall, the action/receiver is a new item and the trigger has been examined by Remington. 700 SHORT & LONG ACTION RECEIVERS It’s been many years since Brownells has been able to offer the legendary Remington 700 action in our catalog (since #58 to be exact!). The problem has been unsteady supply: Remington Mfg: Remington SPECS: Receiver/Bolt - Carbon steel, blued finish (CS), or stainless steel, natural finish (SS). 1-1/16"-16 tpi thread. Bolt not equipped with Integrated Security System (ISS). X-Mark Pro Trigger - Steel, electroless nickel plated finish. Includes trigger lock and owner’s man

more >>
Brownells
$499.99 See It
Small 700 Sa Receiver, Blued - Standard 700 Sa Receiver, Blued

Save 7.5% with coupon code: G4H

Remington Arms Company, LLC (“Remington”) is voluntarily recalling Remington Model 700™ and Model Seven™ rifles which were manufactured from May 1, 2006 through April 9, 2014 and which have an X-Mark Pro® (“XMP®”) trigger. View more information on this recall. Boxes may show signs of handling due to the Remington trigger recall, the action/receiver is a new item and the trigger has been examined by Remington. 700 SHORT & LONG ACTION RECEIVERS It’s been many years since Brownells has been able to offer the legendary Remington 700 action in our catalog (since #58 to be exact!). The problem has been unsteady supply: Remington Mfg: Remington SPECS: Receiver/Bolt - Carbon steel, blued finish (CS), or stainless steel, natural finish (SS). 1-1/16"-16 tpi thread. Bolt not equipped with Integrated Security System (ISS). X-Mark Pro Trigger - Steel, electroless nickel plated finish. Includes trigger lock and owner’s man

more >>
Brownells
$499.99 See It
Remington 700 Lss Chassis - Rem Model 7 Lss Chassis Black

Save 7.5% with coupon code: G4H

The MDT LSS Chassis provides a lightweight and versatile platform for your Remington 700. This drop-in chassis fits Short Action Remington 700 and accepts AICS style detachable magazines. Machined out of aluminum and finished with Cerakote, the LSS is ready to accept standard AR15 grips and collapsible stocks. Rifle receiver will only make contact with the chassis on the V-Shape bedding and recoil lug area, ensuring high accuracy and repeatability. Also, with the generous spacing on the handguard, standard and bull barrels will free float easily. Mounting holes on the forend are compatible with Magpul L5 and L3 rails. Available in black or flat dark earth. Does not accept AR15 grips with Mfg: Modular Driven Technologies SPECS: Fits - Remington 700 Short Action rifles. Accepts AICS style short action magazines (223 & 308). Construction - aluminum. Finish - Cerakote. Accepts standard AR15 collapsible stocks. Accepts fixed stocks with adapter. Accepts AR15 grips WITHOUT beavertail.

more >>
Brownells
$399.00 See It
Remington 700 308 Threaded Barrel - Rem 700/M7 308 18'''' Medium Contour Nitrided Barrel

Save 7.5% with coupon code: G4H

Replacement barrel for Remington 700 or Model-7. Chambered in 308 and ready to be installed on a factory Remington action, with factory recoil lug. Finished with a wear-resistant black nitride, QPQ finish, this barrel has excellent corrosion resistance and increased barrel life. Barrel features 5/8-24 threads, and is ready for suppressor or muzzle device installation. 18" length and medium profile allows for a handy and portable rifle. Profile is similar to Remington Varmint profile. 1-8 twist for superior performance with sub-sonic loads. Includes thread protector. Gunsmith installation recommended. Barrel Installation Instructions Mfg: Advanced Armament SPECS: Fits - Remington 700 or Model-7. Finish - Nitride QPQ. Length - 18". Contour - Medium. Material - 4140 steel. Twist - 1-8.  Includes thread protector.

more >>
Brownells
$425.00 See It
Small 700 Sa Receiver, Blued - Magnum 700 La 300 Ultra Magnum Receiver, Blued

Save 7.5% with coupon code: G4H

Remington Arms Company, LLC (“Remington”) is voluntarily recalling Remington Model 700™ and Model Seven™ rifles which were manufactured from May 1, 2006 through April 9, 2014 and which have an X-Mark Pro® (“XMP®”) trigger. View more information on this recall. Boxes may show signs of handling due to the Remington trigger recall, the action/receiver is a new item and the trigger has been examined by Remington. 700 SHORT & LONG ACTION RECEIVERS It’s been many years since Brownells has been able to offer the legendary Remington 700 action in our catalog (since #58 to be exact!). The problem has been unsteady supply: Remington Mfg: Remington SPECS: Receiver/Bolt - Carbon steel, blued finish (CS), or stainless steel, natural finish (SS). 1-1/16"-16 tpi thread. Bolt not equipped with Integrated Security System (ISS). X-Mark Pro Trigger - Steel, electroless nickel plated finish. Includes trigger lock and owner’s man

more >>
Brownells
$529.99 See It
Remington/Ruger® Firing Pin Disassembly Tool - Firing Pin Disassembly Tool

Save 7.5% with coupon code: G4H

Machined aluminum and steel tool keeps the firing pin spring in place while you remove the cocking piece from the firing pin assembly of Remington and Ruger bolt action rifles. Just insert the firing pin assembly into the housing, tighten the threaded steel shaft to compress the spring, press out the cross-pin, and gradually unscrew the shaft to relieve spring tension. Recessed ends and a wide shoulder on the shaft protect the firing pin tip as the tool presses on the bolt face. Mfg: Gun Runners SPECS: Aluminum body, natural finish, steel threaded compression shaft, matte blued finish. 10¼" (26cm) OAL opened, 8¼" (21cm) OAL closed, 1" (2.54cm) wide, 1" high. Fits Remington 600, 700, 710, 721, 722, Model Seven, XP-100, M24, and 40X; Ruger M77® and M77 Ma

more >>
Brownells
$29.99 See It
kwik klip remington model 700 clip conversion kit

Instantly turns your Remington Model 700 into a clip gun for fast and efficient reloading in the woods. Kit comes with a four-round steel box magazine and a precision-cast aluminum trigger guard - both are finished and fit like factory components.

more >>
Cabelas
$109.99 See It
Stainless Steel Triggerguard Kits - Rem 700 Bdl Screw Kit

Save 7.5% with coupon code: G4H

Standard length, stainless steel screw kits match factory, stainless triggerguards for good looks and all-weather durability. Natural, stainless steel finish resists rust and hides marks caused by screw removal/installation. Remington screws feature socket-heads. Mfg: Brownells SPECS: Stainless steel. Rem Model Seven Kit includes: (1) front guard screw - ¼''''-28 x 1'''' (2.54cm), (1) rear guard screw - 8-36 x 1-5/8'''' (4.1cm). Rem 700 BDL Kit includes: (1) front guard screw - ¼''''-28 x 1-1/16'''' (2.7cm), (1) rear guard screw - ¼''''-28 x 1½'''' (3.8cm). Rem 700 ADL Kit includes:

more >>
Brownells
$12.99 See It
Stainless Steel Triggerguard Kits - Rem 700 Adl Screw Kit

Save 7.5% with coupon code: G4H

Standard length, stainless steel screw kits match factory, stainless triggerguards for good looks and all-weather durability. Natural, stainless steel finish resists rust and hides marks caused by screw removal/installation. Remington screws feature socket-heads. Mfg: Brownells SPECS: Stainless steel. Rem Model Seven Kit includes: (1) front guard screw - ¼''''-28 x 1'''' (2.54cm), (1) rear guard screw - 8-36 x 1-5/8'''' (4.1cm). Rem 700 BDL Kit includes: (1) front guard screw - ¼''''-28 x 1-1/16'''' (2.7cm), (1) rear guard screw - ¼''''-28 x 1½'''' (3.8cm). Rem 700 ADL Kit includes:

more >>
Brownells
$16.99 See It
Remington 700 Nickel Plate w/Safety RH 512

The Timney Triggers Remington 700 model 510 comes with a safety that blocks the trigger, not the sear, which is a totally new design. No screws, drilling, or tapping required. The Model 510 will bring a whole new realm of accuracy to your Remington

more >>
Sears
$144.95 See It
Remington 700 Tactical Bolt Handle - 4140 Tactical Bolt Handle

Save 7.5% with coupon code: G4H

Long, swept-back handle puts the bolt knob in easy reach for faster operation. Features a Model 70-style, rear sweep, plus .650'''' additional length that gives competitive and rapid fire shooters, or anyone wearing gloves, a sure, positive grip. Provides the needed leverage to help clear tight or stuck cases. Mfg: Hollands Gunsmithing SPECS: 17-4 stainless steel or 4140 steel, in-the-white. Hardened to Rc 42-44. 3.7'''' (9.4cm) long.

more >>
Brownells
$32.99 See It
Remington 700 Nickel Plate w/Safety RH 512 -15%

The Timney Triggers Remington 700 model 510 comes with a safety that blocks the trigger, not the sear, which is a totally new design. No screws, drilling, or tapping required. The Model 510 will bring a whole new realm of accuracy to your Remington

more >>
Kmart
$144.95 $123.93 See It
Remington Model 7 Receiver - Model 7 Receiver With 20 Moa Rail -23%

Save 7.5% with coupon code: G4H

Available from AAC, these Remington Model 7 Receivers are ready for your next custom build.  Featuring a matte black phosphate finish and "stamped text" engraving, these Receivers were specifically built to AAC's specifications.  Receiver includes EGW 20 MOA Picatinny Base, which attaches via four 8-40 screws (included).  Receiver also includes a 223 bolt, which also functions perfectly with 300 Blackout.  Included trigger is a recently inspected X-Mark Pro (includes inspection mark).   Model 7 Receivers are compatible with Model 7 stocks only.  Model 7s are compatible with Remington 700 barrels and recoil lugs.  Not compatible with tr Mfg: Advanced Armament SPECS: Fits: Remington 700 recoil lugs and barrels.  Only fits Model 7 stocks.  8-40 screws. Includes: EGW 20 MOA Picatinny Base, 223 Bolt, Trigger and 8-40 screws for mounting base. Not compatible with traditional Model 7 bases and rings that accept 6-48 screws.  Non-compatib

more >>
Brownells
$349.99 $269.99 See It
Pete Grisel-Designed Custom Floorplate - Model 510 Custom Floorplate

Save 7.5% with coupon code: G4H

Machined steel, one-piece, Oberndorf-type triggerguard assemblies designed for the Custom Gun Builder by Pete Grisel. Straight sided, integral magazines (on Model 70 and Mauser 98 units) and a 5° draft, or taper, on the floorplate edges greatly cuts inletting time, gives tightest fit. Fully engravable, polished to a 220 grit finish and can be inletted into the original stock. A beautiful addition to any fine, custom-built rifle. Mfg: Sunny Hill SPECS: Models and sizes as follows - Pre-'64 Model 70: #640 for .375 H&H w/dropped magazine; Mauser 98: #410 for .30-06; #420 for Short Magnums w/standard magazine; #430 for Short Magnums w/dropped magazine; #440 for .375 H&H (full length magnums) w/dropped magazine. Remington 700: #5

more >>
Brownells
$389.99 See It
Tactical Scope Bases - Tactical Bases Remington 700 Short Action

Save 7.5% with coupon code: G4H

Picatinny tactical bases are precision-machined from steel for maximum strength and reliability. One-piece, Tactical Bases are made from solid bar stock of cold drawn alloy steel, stress relieved for extra strength and uniformity. Available for standard elevation adjustment or with 20 MOA forward angle for extra long range shooting. Mfg: Warne Mfg. Company SPECS: Bases: 12L14 carbon steel, powder coated, matte black. Available in standard or 20 MOA. Savage bases available for models with and without AccuTrigger™ (Accu). Winchester bases fit current production Model 70.

more >>
Brownells
$95.99 See It
Remington 700 Magaxine Extension - Remington 700 Sa Mag-Xtender

Save 7.5% with coupon code: G4H

Impact-resistant, cartridge tray extends your rifle’s magazine capacity by replacing the factory floorplate. Injection-molded from high-strength, 60% glass-reinforced nylon for superior durability and reliable function in all conditions. Drop-in fit, requires use of your factory magazine spring, follower, and hinge pin. Short Action model increases the standard magazine capacity of .223-based calibers up to nine rounds. Removable cartridge stop lengthens the tray to accept .308-based cartridges, and increases magazine capacity from four to seven rounds. Mfg: Tactical Components, Llc. SPECS: Glass-reinforced nylon, black. Rem. 700 - Short Action: 3-5/8" (8.6cm) long, 1” (2.5cm) wide, ¾” (1.9cm) high.

more >>
Brownells
$20.95 See It
Loading Ramps - Davidson Loading Ramp - Short

Davidson loading ramps are designed to fill in the magazine cut-out on Remington 600's, Model 7's, and Model 700's (long and short) when converting a rifle to feed as a single shot. Made from aluminum, these loading rams are intended to be glued in for a permanent conversion to single shot. Shooters looking for a temporary single shot conversion should use a Score High Magazine Follower which inserts into your magazine on top of the existing magazine follower. RAMP-S Davidson Loading Ramp for Remington Short Action RAMP-L Davidson Loading Ramp for Remington Long Action Mfg: Davidson

more >>
Sinclair Intl
$14.99 See It
Search within results