1 to 10 of  10 products for robert shaw 9400 thermostat

No exact matches found for robert shaw 9400 thermostat

10 similar items found

Robertshaw® Mercury-Free Line Voltage Thermostat 803a, Cooling, Spst Switch

High Performance. It's what the industry has been looking for - a line voltage thermostat with the performance and accuracy(+/-2 F) of a low voltage control. The Robertshaw 800 series are universal replacements for many other brands and can be used to retrofit most existing electric thermostats. Convenient temperature display level at-a-glance. Bimetal temperature sensing for improved thermal performance. Unit is mercury free and J-box compatible. Positive off assures shutdown of HVAC system. The thermostat closes on temp rise and opens on temp fall. It is also rated to support any device 18-25 amps at 120/240/277v. This model is for cooling that includes a single-line break. Cooling only. UL & CSA listed. 1 year limited warranty. 7.50 L. 5.00 W. 4.50 H.

more >>
Global Industrial
$20.00 See It
Robertshaw® Mercury-Free Line Voltage Thermostat 801, Heating, Spst Switch

High Performance. It's what the industry has been looking for - a line voltage thermostat with the performance and accuracy (+/-2 F) of a low voltage control. The Robertshaw 800 series are universal replacements for many other brands and can be used to retrofit most existing electric heat thermostats. Convenient temperature display level at-a-glance. Bimetal temperature sensing for improved thermal performance. Unit is mercury free and J-box compatible. Positive off assures shutdown of HVAC system. This model is for heating and includes single-line break and double-line break. Heating only. UL & CSA listed. 1 year limited warranty. 7.50 L. 5.00 W. 4.50 H.

more >>
Global Industrial
$21.25 See It
Water Heating Control - 38k Capacity, 1/2" Inlet Pipe

The Robertshaw 110 and 220 Series gas water heater valves were first manufactured for the O.E.M. market in 1955. For the last 50 years, the 110 series has been the definitive gas water heater valve. Over the years, minor product improvements were incorporated, but the valves have remained basically the same. In 1995, Robertshaw introduced the new 220R Series gas water heater valve. The new 220R Series will mount and operate in the same manner as the original 110 Series. The 220R features simplified pilot lighting and easy-to-adjust gas pressure regulator. The 110 Series Water Heater Thermostat Uni-Kit and Commercial Water Heater Thermostat Uni-Kits were designed for universal replacement applications. All models feature built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. If an ECO has detected an over-temperature condition and has opened, the control will not function and a new replacement will be required. All domestic and RV models have a 160 F temperature high stop. All commercial models have a 180 F temperature high stop. All models have a 5-1/2" sensing element and vary by inlet and outlet size, shank length, regulator type and setting.Made in the USA. 14.50 L. 9.50 W. 6.00 H.

more >>
Global Industrial
$222.95 See It
Water Heating Control - 45k Capacity, 1/2" Inlet Pipe, 4.0" W.C Nat. Gas Reg.

The Robertshaw 110 and 220 Series gas water heater valves were first manufactured for the O.E.M. market in 1955. For the last 50 years, the 110 series has been the definitive gas water heater valve. Over the years, minor product improvements were incorporated, but the valves have remained basically the same. In 1995, Robertshaw introduced the new 220R Series gas water heater valve. The new 220R Series will mount and operate in the same manner as the original 110 Series. The 220R features simplified pilot lighting and easy-to-adjust gas pressure regulator. The 110 Series Water Heater Thermostat Uni-Kit and Commercial Water Heater Thermostat Uni-Kits were designed for universal replacement applications. All models feature built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. If an ECO has detected an over-temperature condition and has opened, the control will not function and a new replacement will be required. All domestic and RV models have a 160 F temperature high stop. All commercial models have a 180 F temperature high stop. All models have a 5-1/2" sensing element and vary by inlet and outlet size, shank length, regulator type and setting. 9.25 L. 6.00 W. 5.00 H.

more >>
Global Industrial
$74.94 See It
Intermittent Pilot Ignition Control, 24vac, Lockout Timing 90 Sec.

When the thermostat calls for heat, the 780-845 control simultaneously initiates ignition sparking and opens the pilot valve portion of the gas valve. Pilot flame recognition stops ignition sparking and opens the main valve portion of the gas valve. Pilot burner flame is continuously monitored at a synchronous frequency for the duration of the heating cycle. Should the pilot flame fail during the heating cycle, the control will shut off the main valve until the pilot flame is established. The 780-845 lockout ignition control provides 90 seconds of spark, followed by a 6 minute time delay (purge) between ignition attempts. After three tries, if no pilot flame is sensed, the control goes into a one-hour lockout period. At the end of the lockout period, if the demand for heat is still present, the unit will repeat the three tries for ignition. Identifying Your Robertshaw ICU Terminals: MV-Main valve, PV-Pilot valve, LED-Dagnostic LED, TH-24V thermostat, PV-MV: Gas valve common, TR-Transformer ground, GND-Main Burner Ground, SENSE-Internal/external sense terminal, SPARK-Spark output. During lockout, you may override the auto-system, and manually reset the unit at the thermostat. The green diagnostic LED will be on continuously for normal operation. The LED will be off for internal lockout and will flash continuously for problems external to the control (ie. not sensing flame). 8.50 L. 8.50 W. 8.00 H.

more >>
Global Industrial
$118.95 See It
Water Heating Control - 10k Capacity, 3/8" Inlet Pipe

The Robertshaw 110 and 220 Series gas water heater valves were first manufactured for the O.E.M. market in 1955. For the last 50 years, the 110 series has been the definitive gas water heater valve. Over the years, minor product improvements were incorporated, but the valves have remained basically the same. In 1995, Robertshaw introduced the new 220R Series gas water heater valve. The new 220R Series will mount and operate in the same manner as the original 110 Series. The 220R features simplified pilot lighting and easy-to-adjust gas pressure regulator. The 110 Series Water Heater Thermostat Uni-Kit and Commercial Water Heater Thermostat Uni-Kits were designed for universal replacement applications. All models feature built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. If an ECO has detected an over-temperature condition and has opened, the control will not function and a new replacement will be required. All domestic and RV models have a 160 F temperature high stop. All commercial models have a 180 F temperature high stop. All models have a 5-1/2" sensing element and vary by inlet and outlet size, shank length, regulator type and setting. 9.25 L. 6.00 W. 5.00 H.

more >>
Global Industrial
$195.95 See It
26-4088 Bezel for D1 / D18 Robertshaw 4 Pole Electric Thermostat

This All Points 26-4088 thermostat bezel is designed for use with D1 or D18 Robertshaw 4 pole electric thermostats. 26-4088 From All Points

more >>
The WEBstaurant Store
$18.70 See It
02542.0000 Robertshaw Thermostat Assembly for HW2 Hot Water Dispensers

This Bunn 02542.0000 Robertshaw thermostat assembly is a direct replacement for the one that comes with HW2 hot water dispensers and allows you to easily replace the damaged component on your existing unit! It includes a wiring harness, instruction tag, tank heater to limit switch lead, (2) #8-32 x .25" terminal screws, and a #6-32 x .312" mounting screw. 02542.0000 From Bunn

more >>
The WEBstaurant Store
$41.99 See It
Thermostat Tc125, 3/8 X 3-1/2, 36 For Frymaster - Part# 8262013

ThermostatTC125, 3/8 X 3-1/2, 36 for Frymaster - Part# 8262013Fits Frymaster Models: CFD50, CFD60, CFD80, D20, D50, D50G, D50GDD, D60, D60GS, D80, FPD65, FPHD265, FPHD365, FPHD465, FPHD565, FPHD665, HD150, HD260, HD60, SCFD250G-RTI, SCFD50, SCFD60, SCFD80, SCFHD160, SCFHD260, SCFHD360, SCFHD456, SCFHD460, SCFHD460C, SCFHD460GNC, SCFHD60, SM20, SM220, SM35, SM40, SM50, SM60, SM80, SR162GN, SR38, SR42, SR52, SR62, Super Runner 52, TC25Product Info: ( Peco Type - TC125 ) ( Temp 200-400 ), ( Bulb 3/8" X 3-1/2") ( Cap 36" ) ( 1/4" Stuff Box ), ( Dial to Use A251, K-107, # 221006 OFF-400-200, 4-Way ), Garland Dial to Use # 22-1027, (DOT-400-200) (Mount. 187"), (Flat Down ), This Thermostat is Used BY Frymaster and Comes, With a Clip to Keep the Temperature from Moving up, Due, to Dial Being Bumped. the Clip Puts Pressure on the Shaft, of the Thermostat. Imperial Has Used This Thermostat in the Past. They May, Also Use the Robertshaw Equivalent # 461272.OEM part numbers are used for reference only, see our Policies for more details

more >>
Sharp-Tek Supply
$63.42 See It
26-1277 Robertshaw 2 Pole Thermostat Knob Bezel - 1 1/2" ID x 2 3/4" OD

This All Points 26-1277 thermostat knob bezel replaces the missing or damaged one on selected pieces of equipment. 26-1277 From All Points

more >>
The WEBstaurant Store
$21.10 See It
Search within results
  • Find by Price
    • $ to $