1 to 20 of  44 products for robertshaw 9400

No exact matches found for robertshaw 9400

44 similar items found

SP8099N N/A Natural Gas Replacement Parts Collection Robertshaw High -20%

Free Shipping on Orders Over $199

Rheem, SP8099N, Valve System, Replacement Parts, Valve, Natural Gas, Replacement Parts Collection Robertshaw High Capacity Natural Gas Valve Preferred Parts: The premium line of approved replacement parts. Features: Manufacturer: Robertshaw For Rheem

more >>
Build.com
$288.39 $230.71 See It
Robertshaw® Mercury-Free Line Voltage Thermostat 803a, Cooling, Spst Switch

High Performance. It's what the industry has been looking for - a line voltage thermostat with the performance and accuracy(+/-2 F) of a low voltage control. The Robertshaw 800 series are universal replacements for many other brands and can be used to retrofit most existing electric thermostats. Convenient temperature display level at-a-glance. Bimetal temperature sensing for improved thermal performance. Unit is mercury free and J-box compatible. Positive off assures shutdown of HVAC system. The thermostat closes on temp rise and opens on temp fall. It is also rated to support any device 18-25 amps at 120/240/277v. This model is for cooling that includes a single-line break. Cooling only. UL & CSA listed. 1 year limited warranty. 7.50 L. 5.00 W. 4.50 H.

more >>
Global Industrial
$20.00 See It
Robertshaw® Mercury-Free Line Voltage Thermostat 801, Heating, Spst Switch

High Performance. It's what the industry has been looking for - a line voltage thermostat with the performance and accuracy (+/-2 F) of a low voltage control. The Robertshaw 800 series are universal replacements for many other brands and can be used to retrofit most existing electric heat thermostats. Convenient temperature display level at-a-glance. Bimetal temperature sensing for improved thermal performance. Unit is mercury free and J-box compatible. Positive off assures shutdown of HVAC system. This model is for heating and includes single-line break and double-line break. Heating only. UL & CSA listed. 1 year limited warranty. 7.50 L. 5.00 W. 4.50 H.

more >>
Global Industrial
$21.25 See It
Energy Recovery Ventilator - Used in homes up to 3350 sq feet

Todays homes are built tighter than ever before. While this may be good for energy efficiency, tighter homes trap indoor air pollutants. Indoor air quality is becoming increasingly important. That is why Robertshaw is introducing a new line of recovery ventilators. These new ventilators are designed to bring in fresh, outside air and exchange it with the stale in.side air without compromising the energy savings of your home. Four models are available. The Heat Recovery Ventilators (HRV's) are designed for cooler climates where the demand for heat exchange is greatest. The Energy Recovery Ventilators (ERV's) are designed for the warmer climates where cooling and humidification control is more important. Both the HRV's and ERV's are available in two sizes to fit the square footage of any home

more >>
Heat And Cool
$798.00 See It
Heat Recovery Ventilator - Used in homes up to 3350 sq feet

Todays homes are built tighter than ever before. While this may be good for energy efficiency, tighter homes trap indoor air pollutants. Indoor air quality is becoming increasingly important. That is why Robertshaw is introducing a new line of recovery ventilators. These new ventilators are designed to bring in fresh, outside air and exchange it with the stale in.side air without compromising the energy savings of your home. Four models are available. The Heat Recovery Ventilators (HRV's) are designed for cooler climates where the demand for heat exchange is greatest. The Energy Recovery Ventilators (ERV's) are designed for the warmer climates where cooling and humidification control is more important. Both the HRV's and ERV's are available in two sizes to fit the square footage of any home

more >>
Heat And Cool
$746.00 See It
Heat Recovery Ventilator - Used in homes up to 2150 sq feet

Todays homes are built tighter than ever before. While this may be good for energy efficiency, tighter homes trap indoor air pollutants. Indoor air quality is becoming increasingly important. That is why Robertshaw is introducing a new line of recovery ventilators. These new ventilators are designed to bring in fresh, outside air and exchange it with the stale in.side air without compromising the energy savings of your home. Four models are available. The Heat Recovery Ventilators (HRV's) are designed for cooler climates where the demand for heat exchange is greatest. The Energy Recovery Ventilators (ERV's) are designed for the warmer climates where cooling and humidification control is more important. Both the HRV's and ERV's are available in two sizes to fit the square footage of any home

more >>
Heat And Cool
$598.00 See It
Water Heating Control - 38k Capacity, 1/2" Inlet Pipe

The Robertshaw 110 and 220 Series gas water heater valves were first manufactured for the O.E.M. market in 1955. For the last 50 years, the 110 series has been the definitive gas water heater valve. Over the years, minor product improvements were incorporated, but the valves have remained basically the same. In 1995, Robertshaw introduced the new 220R Series gas water heater valve. The new 220R Series will mount and operate in the same manner as the original 110 Series. The 220R features simplified pilot lighting and easy-to-adjust gas pressure regulator. The 110 Series Water Heater Thermostat Uni-Kit and Commercial Water Heater Thermostat Uni-Kits were designed for universal replacement applications. All models feature built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. If an ECO has detected an over-temperature condition and has opened, the control will not function and a new replacement will be required. All domestic and RV models have a 160 F temperature high stop. All commercial models have a 180 F temperature high stop. All models have a 5-1/2" sensing element and vary by inlet and outlet size, shank length, regulator type and setting.Made in the USA. 14.50 L. 9.50 W. 6.00 H.

more >>
Global Industrial
$222.95 See It
SP20166A N/A Natural Gas Replacement Parts Collection Natural Gas -20%

Free Shipping on Orders Over $199

Rheem, SP20166A, Valve System, Replacement Parts, Valve, Natural Gas, Replacement Parts Collection Natural Gas Valve for 42V40F, 42V50-40F, 22V30S-30F and More Features: Manufacturer: Robertshaw For Rheem: Fury Series: 42V40F 42V50-40F 22V30S-30F Pro

more >>
Build.com
$100.28 $80.22 See It
Water Heating Control - 10k Capacity, 3/8" Inlet Pipe

The Robertshaw 110 and 220 Series gas water heater valves were first manufactured for the O.E.M. market in 1955. For the last 50 years, the 110 series has been the definitive gas water heater valve. Over the years, minor product improvements were incorporated, but the valves have remained basically the same. In 1995, Robertshaw introduced the new 220R Series gas water heater valve. The new 220R Series will mount and operate in the same manner as the original 110 Series. The 220R features simplified pilot lighting and easy-to-adjust gas pressure regulator. The 110 Series Water Heater Thermostat Uni-Kit and Commercial Water Heater Thermostat Uni-Kits were designed for universal replacement applications. All models feature built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. If an ECO has detected an over-temperature condition and has opened, the control will not function and a new replacement will be required. All domestic and RV models have a 160 F temperature high stop. All commercial models have a 180 F temperature high stop. All models have a 5-1/2" sensing element and vary by inlet and outlet size, shank length, regulator type and setting. 9.25 L. 6.00 W. 5.00 H.

more >>
Global Industrial
$195.95 See It
Water Heating Control - 45k Capacity, 1/2" Inlet Pipe, 4.0" W.C Nat. Gas Reg.

The Robertshaw 110 and 220 Series gas water heater valves were first manufactured for the O.E.M. market in 1955. For the last 50 years, the 110 series has been the definitive gas water heater valve. Over the years, minor product improvements were incorporated, but the valves have remained basically the same. In 1995, Robertshaw introduced the new 220R Series gas water heater valve. The new 220R Series will mount and operate in the same manner as the original 110 Series. The 220R features simplified pilot lighting and easy-to-adjust gas pressure regulator. The 110 Series Water Heater Thermostat Uni-Kit and Commercial Water Heater Thermostat Uni-Kits were designed for universal replacement applications. All models feature built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. If an ECO has detected an over-temperature condition and has opened, the control will not function and a new replacement will be required. All domestic and RV models have a 160 F temperature high stop. All commercial models have a 180 F temperature high stop. All models have a 5-1/2" sensing element and vary by inlet and outlet size, shank length, regulator type and setting. 9.25 L. 6.00 W. 5.00 H.

more >>
Global Industrial
$74.94 See It
Gas Ignition Control, Nonlockout

Robertshaw ignition control units used in the Uni-Line 712 Series kits are C.S.A. design certified to applicable A.N.S.I. standards. CSA Approved. 8.50 L. 8.50 W. 8.00 H.

more >>
Global Industrial
$116.95 See It
Intermittent Pilot Ignition Control, 24vac, Lockout Timing 90 Sec.

When the thermostat calls for heat, the 780-845 control simultaneously initiates ignition sparking and opens the pilot valve portion of the gas valve. Pilot flame recognition stops ignition sparking and opens the main valve portion of the gas valve. Pilot burner flame is continuously monitored at a synchronous frequency for the duration of the heating cycle. Should the pilot flame fail during the heating cycle, the control will shut off the main valve until the pilot flame is established. The 780-845 lockout ignition control provides 90 seconds of spark, followed by a 6 minute time delay (purge) between ignition attempts. After three tries, if no pilot flame is sensed, the control goes into a one-hour lockout period. At the end of the lockout period, if the demand for heat is still present, the unit will repeat the three tries for ignition. Identifying Your Robertshaw ICU Terminals: MV-Main valve, PV-Pilot valve, LED-Dagnostic LED, TH-24V thermostat, PV-MV: Gas valve common, TR-Transformer ground, GND-Main Burner Ground, SENSE-Internal/external sense terminal, SPARK-Spark output. During lockout, you may override the auto-system, and manually reset the unit at the thermostat. The green diagnostic LED will be on continuously for normal operation. The LED will be off for internal lockout and will flash continuously for problems external to the control (ie. not sensing flame). 8.50 L. 8.50 W. 8.00 H.

more >>
Global Industrial
$118.95 See It
Hot Surface Furnace Ignitor, 5" Lead Wire Length

Robertshaw's 41-400 Series Norton Hot Surface Ignitors deliver dependable ignition in heating systems of every description. From furnaces and boilers to rooftop heaters, infrared burners, unit heaters, water heaters and many other types of HVAC equipment. The 41-400 Series Hot Surface Ignitors are made of high-purity recrystallized silicon carbide (CrystarTM) which combines physical and thermal strength with stable electrical properties. The 41-400 Series are designed to reach ignition temperature(s) within 17 seconds. They have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity. The lead wires are also enclosed with a special high-temperature fiberglass insulation providing total electrical protection. All 41-400 series ignitors are 120 VAC models. Some hot surface modules are rated for 208/240 volts input, however they step the voltage to ignitor down to 120 VAC. 7.50 L. 5.00 W. 4.50 H.

more >>
Global Industrial
$26.95 See It
Universal Round Silicon Carbide Igniter Kit

Supco Universal Round Silicon Carbide Igniter Kit Designed to replace over 170 part numbers including Robertshaw, Norton and many other original equipment manufacturers. Engineered Reaction Bonded Silicon Carbide DesignGreater Physical StrengthLower Power ConsumptionSuperior Gas Lighting AbilityEasy InstallationMinimize InventoryReplaces SIG1000 7.25 L. 2.38 W. 2.00 H.

more >>
Global Industrial
$20.50 See It
Hot Surface Furnace Ignitor W/ Mounting Adaptors, 4-1/2" Lead Wire Length

Robertshaw's 41-400 Series Norton Hot Surface Ignitors deliver dependable ignition in heating systems of every description. From furnaces and boilers to rooftop heaters, infrared burners, unit heaters, water heaters and many other types of HVAC equipment. The 41-400 Series Hot Surface Ignitors are made of high-purity recrystallized silicon carbide (CrystarTM) which combines physical and thermal strength with stable electrical properties. The 41-400 Series are designed to reach ignition temperature(s) within 17 seconds. They have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity. The lead wires are also enclosed with a special high-temperature fiberglass insulation providing total electrical protection. All 41-400 series ignitors are 120 VAC models. Some hot surface modules are rated for 208/240 volts input, however they step the voltage to ignitor down to 120 VAC. 7.50 L. 5.00 W. 4.50 H.

more >>
Global Industrial
$21.00 See It
Hot Surface Furnace Ignitor, 19" Lead Wire Length

Robertshaw's 41-400 Series Norton Hot Surface Ignitors deliver dependable ignition in heating systems of every description. From furnaces and boilers to rooftop heaters, infrared burners, unit heaters, water heaters and many other types of HVAC equipment. The 41-400 Series Hot Surface Ignitors are made of high-purity recrystallized silicon carbide (CrystarTM) which combines physical and thermal strength with stable electrical properties. The 41-400 Series are designed to reach ignition temperature(s) within 17 seconds. They have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity. The lead wires are also enclosed with a special high-temperature fiberglass insulation providing total electrical protection. All 41-400 series ignitors are 120 VAC models. Some hot surface modules are rated for 208/240 volts input, however they step the voltage to ignitor down to 120 VAC. 7.50 L. 5.00 W. 4.50 H.

more >>
Global Industrial
$26.95 See It
54-1107 1/2" Gas Safety Valve; Natural Gas; 1/2" Gas In / Out

This All Points 54-1107 1/2" FPT natural gas sarety valve will replace older Robertshaw valves on select equipment. It includes flex tubing and fittings. 54-1107 From All Points

more >>
The WEBstaurant Store
$188.00 See It
26-4088 Bezel for D1 / D18 Robertshaw 4 Pole Electric Thermostat

This All Points 26-4088 thermostat bezel is designed for use with D1 or D18 Robertshaw 4 pole electric thermostats. 26-4088 From All Points

more >>
The WEBstaurant Store
$18.70 See It
41-402 | Robertshaw Furnace Igniter Replacement

Replacement Ignitor for some Amana, Carrier, Goodman, ICP, Lennox, Norton, Rheem, Robertshaw and Trane Furnace models. Directly Replaces: 38322B001, 201D, 201N, 201W, 271N, 271W, 62-22441-01, 340039P01, IGN23, TJIG402K, AP5324696, 41-402, ER02532625000, IG402K, 10541000, 10399, 09050, 41-408, ER1411, 41-1402, 767A-371, SIG402, 41402, 41-411, 41-410, 2979546. Specifications: Ceramic Block Stripped Ends Repair Skill Level:

more >>
Appliance Zone
$20.25 See It
4590 | Robertshaw Oven & Range Thermostat Knob Replacement

Replacement Universal Electric Thermostat Knob used on some Robertshaw brand Stove / Oven / Range models. Directly Replaces: TJ90RK102, AP4503028, 4590-324, RK102, 4590-324, 4590-339, RK102, 4590-526, 4590-724. Specifications: Kit includes: (5) knobs; (1) thermostat 150°-500° with broil inlay; (1) CCW to ON inlay; (1) CW to ON inlay; (1) each of blue, green, gray, red and yellow inserts. Knobs are black. Diagnosis and Repair Tips Diagnosis and Repair Tips Repair Skill Level: Repair Tip: Most Knobs just slip on the burner switch shaft. When looking for a replacement, take note of the shape of the insert. If you are not able to find an exact match for your model, knowing the size and shape of the insert will help you find a replacement knob. Search Appliance Repair Forum for related posts.Disclaimer: Information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the information referred to are beyond control, ApplianceRepairForum.com and Appliance Zone, cannot be held liable for results obtained or arising from use or reliance on such information. The User assumes responsibility associated with making test measurements, adjustments, parts replacements and any other action necessary to perform any recommended procedures. It is the responsibility of the User to ask for clarification if a recommendation is not fully understood, including the risks and hazards associated with the recommended procedures. //

more >>
Appliance Zone
$2.25 See It
Search within results
  • Find by Price
    • $ to $