1 to 20 of  100 products for ruger 1022 barrel band adapter sling swivel mount bl

No exact matches found for ruger 1022 barrel band adapter sling swivel mount bl

100 similar items found

Barrel Band

Black composite construction, Barrel band only. No hardware included. Mfg: Ruger SPECS: FITS: 10/22 R,RB, .22; 10/22 RP Synthetic Blue & SS, .22; 10/22 T Blue & SS, .22

more >>
Brownells
$12.99 See It
Ruger 10-22 Tactical Barrel Band - Tactical Barrel Band

Machined aluminum replacement for the factory barrel band on a 10/22 carbine offers an integral sling loop and two Weaver-style accessory rails. Accepts slings up to 1¼" wide, and reversible design lets you install it with the sling loop on either side of the rifle. One-slot side rail and a two-slot bottom rail let you mount lights, lasers, or other items. Won't interfere with factory front sight. Mfg: Pro Mag SPECS: 6061 T6 aluminum, hardcoat anodized, black. 1¼" (3.2cm) long, 2" (5cm) wide, 2¼" (5.7cm) high. 1.3 oz. (37g) weight.

more >>
Brownells
$29.99 See It
10/22 Bull Barrel Channel Overmolded Rifle Stocks - Ruger 10/22 Stock, B/B Rubber Covering

Cushioned rubber or nylon outer skin provides non-slip, shooting comfort; internal fiberglass body gives solid support, is lightweight and easy to carry. Fully-inletted for a drop-in fit; models available to fit nominal .920" diameter bull barrels (B/B). Straight comb; wide, varmint-style forend with finger grooves, cobblestone finish on grip and forend; dual palm swells and recurve pistol grip make this stock as comfortable to shoot as it is practical. Includes rubber recoil pad, and front and rear sling studs. Mfg: Hogue SPECS: Fiberglass with Nylon or Rubber covering, 29" (73cm) long, 13¾" (35cm) length of pull, 1¼" (2.8cm) drop at heel, 1.9 (.86kg) wt. fits Ruger 10/22.

more >>
Brownells
$69.99 See It
Rifle Sling Swivel Sets - 1'''', Kit Incl Swivels W/Wood Screw Front Stud & Rear Stud

All-steel swivels are made in the U.S.A. and contain no plastic parts to crack and fail when you least expect it. Quick-detach feature allows you to use one sling for several rifles. Swivel attaches to mounting stud and locks down with knurled cylinder nut to prevent accidental opening. Available for 1" or 1¼" wide slings. Swivels are available in pairs with or without mounting studs. Model GTSW-23 uses a wood screw front stud, all other sets use a front stud with machine screw and nut or specific hardware for attaching to a magazine tube or barrel. Mfg: Grovtec Us, Inc. SPECS: Steel, blued, matte finish.

more >>
Brownells
$8.99 See It
Ruger 10/22 Target Barrels - 10/22 Target Barrel, Blued

Heavy contour, premium-grade "Bentz" chambered .22 LR barrel provides an immediate improvement in accuracy over your original factory barrel. Close-tolerance Bentz chamber combines the accuracy of a match grade chamber with the reliable cycling of a standard factory chamber. Extra-heavy, untapered .920" O.D. provides maximum stability for greater shot-to-shot consistency. Use with standard or match grade ammunition; not for use with CCI Stinger ammunition. Minor fitting to stock may be required. Chrome-moly models have polished blue finish and are available in an 18" length with dished crown or a 16 ½" length with ½"-28 tpi threaded muzzle for ad Mfg: E.R. Shaw SPECS: 4140 chrome-moly steel, blued, polished finish, or 416 stainless steel (SS), natural matte finish. .920" (2.34cm) O.D. 18" long (45.7cm). Blued barrel w/threaded muzzle 16½" (42cm) long. ½"-28 tpi thread.

more >>
Brownells
$99.99 See It
Ar-15/M16 Front Sling Adapters - Mctar-07 Stud Mount Adapter

Two-piece clamp with single cross-bolt secures adapter to Picatinny/Weaver-style handguard rails so you have a front sling attachment point. MCTAR-06 has pivoting, 1¼" wide swivel for direct sling attachment. Rubber coating on swivel prevents noisy, metal-to-metal contact. MCTAR-07 includes a fixed, dome-shaped stud that accepts your own, standard quick-detach swivel. MCTAR-08 includes a 11/4" wide, 360º rotating, push-button swivel for rapid sling removal. MCTAR-08HD has heavy duty base and swivel that stands up to extreme tactical operations. 1¼" wide, quick-detach swivel limits travel to prevent sling wrapping yet allows necessary movement. MCTAR-08 Mfg: Midwest Industries, Inc. SPECS: Bases - 6061 aluminum, mil-spec hardcoat anodized, matte black; steel setscrew, matte black oxide. MCTAR-08HD - 7/8" (2.2cm) long x 13/16" (3cm) wide. MCTAR-08HDO - 2" (5cm) long x 1" (2.5cm) wide. Other models - 9/16" (1.4cm) long x 13/16&quo

more >>
Brownells
$23.99 See It
Ruger 10/22 Target Barrels - 10/22 Target Barrel, Ss

Heavy contour, premium-grade "Bentz" chambered .22 LR barrel provides an immediate improvement in accuracy over your original factory barrel. Close-tolerance Bentz chamber combines the accuracy of a match grade chamber with the reliable cycling of a standard factory chamber. Extra-heavy, untapered .920" O.D. provides maximum stability for greater shot-to-shot consistency. Use with standard or match grade ammunition; not for use with CCI Stinger ammunition. Minor fitting to stock may be required. Chrome-moly models have polished blue finish and are available in an 18" length with dished crown or a 16 ½" length with ½"-28 tpi threaded muzzle for ad Mfg: E.R. Shaw SPECS: 4140 chrome-moly steel, blued, polished finish, or 416 stainless steel (SS), natural matte finish. .920" (2.34cm) O.D. 18" long (45.7cm). Blued barrel w/threaded muzzle 16½" (42cm) long. ½"-28 tpi thread.

more >>
Brownells
$119.99 See It
Ar-15/M16 Front Sling Adapters - Mctar-08 Swivel Mount Adapter

Two-piece clamp with single cross-bolt secures adapter to Picatinny/Weaver-style handguard rails so you have a front sling attachment point. MCTAR-06 has pivoting, 1¼" wide swivel for direct sling attachment. Rubber coating on swivel prevents noisy, metal-to-metal contact. MCTAR-07 includes a fixed, dome-shaped stud that accepts your own, standard quick-detach swivel. MCTAR-08 includes a 11/4" wide, 360º rotating, push-button swivel for rapid sling removal. MCTAR-08HD has heavy duty base and swivel that stands up to extreme tactical operations. 1¼" wide, quick-detach swivel limits travel to prevent sling wrapping yet allows necessary movement. MCTAR-08 Mfg: Midwest Industries, Inc. SPECS: Bases - 6061 aluminum, mil-spec hardcoat anodized, matte black; steel setscrew, matte black oxide. MCTAR-08HD - 7/8" (2.2cm) long x 13/16" (3cm) wide. MCTAR-08HDO - 2" (5cm) long x 1" (2.5cm) wide. Other models - 9/16" (1.4cm) long x 13/16&quo

more >>
Brownells
$34.99 See It
Ar-15/M16 Ubr Quick-Detach Sling Swivel Mounts Type 2 Kit - Type 2 Qd Sling Mount

Heavy-duty steel receptacle supplements the two mounts that come with the stock to give your UBR stock maximum versatility in ambidextrous, quick-detach, pushbutton sling mounting. Bolts to any of the stock's four mounting points and accepts most pushbutton, single-point sling swivels. Allows full 360° rotation of swivel for unrestricted sling travel. While both the UBR and STR come with reversible push-button QD swivel sockets pre-installed on the left side of the stock (UBR comes with two, one front and rear), the UBR/STR QD Swivel Sling Mount can be installed on the opposite side to add additional push-button sling swivels. Heavy-duty black phosphatized steel construction eas Mfg: Magpul SPECS: Steel, phosphate finish, matte black. ¾" (1.9cm) long. .

more >>
Brownells
$18.99 See It
Ruger 10/22, 77/22lr & Mag Thm Tension Barrel - Comp 10/22lr Barrel, Carbon Fiber

Ultra lightweight barrel features taper honed, match chamber and bore for outstanding accuracy. Carbon fiber or aluminum shroud with axial tension at both ends provides exceptional rigidity without excess weight. 22 LR barrels are drilled and tapped for barrel mounted, cantilever, scope mount. Installs in minutes without modification to gun. Comp 10/22 barrels feature single chamber, multi-port compensator for reduced recoil, faster follow-up shots. Mfg: Volquartsen SPECS: Stainless steel liner. Carbon fiber shroud, black woven appearance. Aluminum shroud, silver anodized finish. Standard Barrels - 16½" (42cm) long, Comp Barrels - 18½" (47cm) long. .920" (23.4mm) diameter. 23 oz. (652 g) weight. *10/22, .22 Magnum barrels fit ONL

more >>
Brownells
$299.99 See It
Ruger 10/22 T6 Stock - Black

Bring proven military technology and performance to your Ruger 10/22 with this easy-to-install stock. Doing so upgrades the look and increases your rifles versatility and ergonomics. Six-position adjustable stock for a customized fit. The SAW-style

more >>
Cabelas
$99.99 See It
Ruger 10/22 Sb-X Barrels - Ruger 10/22 Takedown Sb-X Barrel, Black

The SB-X barrel provides the versatility of a short barreled rifle (SBR) without the burden of red tape paperwork. The SB-X barrel allows the addition of a suppressor without drastically increasing the overall length of your firearm. The barrel length of 12.25" would be considered an SBR if not for the shroud which brings the overall length to 16.5". This barrel avoids cumbersome paperwork and provides a shorter, light-weight solution for those who love shooting suppressed. With the standard threaded end, attaching a suppressor is easier than tying your shoe. Includes Tactical Solutions inert suppressor. Mfg: Tactical Solutions, Llc SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Chrome-moly steel liner with 1-16" twist rifling. 16½" (42cm ) O.A.L. including shroud, 12¼" (31.1cm) bore length, .920" (2.3cm) O.D. Accepts muzzle accessories up to 1" (2.5cm) O.D. with ½&quot

more >>
Brownells
$295.99 See It
Ruger 10/22 Sb-X Barrels - Sb-X Barrel

The SB-X barrel provides the versatility of a short barreled rifle (SBR) without the burden of red tape paperwork. The SB-X barrel allows the addition of a suppressor without drastically increasing the overall length of your firearm. The barrel length of 12.25" would be considered an SBR if not for the shroud which brings the overall length to 16.5". This barrel avoids cumbersome paperwork and provides a shorter, light-weight solution for those who love shooting suppressed. With the standard threaded end, attaching a suppressor is easier than tying your shoe. Includes Tactical Solutions inert suppressor. Mfg: Tactical Solutions, Llc SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Chrome-moly steel liner with 1-16" twist rifling. 16½" (42cm ) O.A.L. including shroud, 12¼" (31.1cm) bore length, .920" (2.3cm) O.D. Accepts muzzle accessories up to 1" (2.5cm) O.D. with ½&quot

more >>
Brownells
$269.99 See It
10/22 Carbon Fiber Thm Barrel - Black Ends - 10/22 Carbon Fiber Thm Barrel, Black Ends

Carbon fiber and stainless steel construction Matte black finish at ends Designed to fit Ruger 10/22 rifle Drilled and tapped to accept Volquartsen barrel mounted scope mount Length: 16.5 inches Weight: 32 ouncesThe 10/22 Carbon Fiber THM Barrel features a tapered honed match barrel and chamber. The carbon fiber tension sleeve makes it a rigid, accurate, and lightweight barrel.The Carbon Fiber THM Barrel is made of carbon fiber with stainless steel ends finished in matte black. It is drilled and tapped to accept Volquartsen barrel mounted scope mount and designed to fit a Ruger 10/22 LR. Mfg: Volquartsen SPECS: Stainless steel construction, Matte black finish at ends, Length: 16.5 inches, Weight: 23 oz., Designed for Ruger 10/22, Drilled and tapped for barrel mounted scope mount.

more >>
Brownells
$299.99 See It
Ar-15/M16 Professional-Grade Sling Adapter - Pro-Grade Sling Adapter, Black

Heavy-duty sling adapter slides over collapsible stock buffer tubes to provide secure, ambidextrous attachment for the push-button QD sling swivel. No gunsmithing required-simply tighten down the steel crossbolt with the included hex key wrench. Solid aluminum construction with plenty of extra metal at the stress points to ensure this mount won't twist, flex, or bend under pressure. Beveled and rounded edges help resist snagging on sling or other gear. Indexes to upper receiver to prevent unwanted rotation of buffer tube. Hardcoat anodized for extra strength and wear resistance; available in matte black or dark earth. Stainless steel swivel has a non-reflective black finish an Mfg: Troy Industries, Inc. SPECS: Aluminum, hardcoat anodize, matte black or dark earth, with stainless steel sling swivel, matte black finish. Accepts slings up to 1¼" (3.2cm) wide.

more >>
Brownells
$48.99 See It
Ar-15 Quick Release Sling Swivels - Parkerized Front Swivel Stud

Parkerized finish provides correct appearance; QD swivel studs have cross drilled mounting holes for vertical or side carry. Front swivel stud attaches to free float or A-2-style detachable handguards. Requires drilling a single mounting hole in free float tubes. Rear QD sling stud replaces fixed military-type without modification to stock. Uncle Mike's Quick Detachable Sling Swivels have a parkerized finish, accept 1-1/4'''' slings. Mfg: Kns Precision, Inc. SPECS: Steel, parkerized, dark gray finish.

more >>
Brownells
$14.99 See It
Barska 10-22 Ruger Base Mount

FREE SHIPPING Orders $50+

The 10-22 Ruger Base Mount accepts standard picatinny rings and can be fixed on to the iron sight of the rifle. This mount has a T6 aluminum finish that will give you a strong and sturdy feeling.

more >>
Overstock Main
$21.99 See It
Volquartsen Ruger 10/22 Silver Receiver Mount

FREE SHIPPING Orders $50+

This Volquartsen Ruger 10/22 Receiver Mount is a Weaver-style scope mount that uses the Ruger factory receiver holes for mounting. This mount features a silver finish.

more >>
Overstock Main
$35.99 See It
10/22 50rd 22lr Drum Magazine - 50-Rd Mag For Ruger 10/22

Dependable, super-capacity drum magazine lets you shoot 50-round strings of .22 LR ammunition in your 10/22 for plenty of plinking fun. No modifications to rifle needed; simply snaps into the mag well like the standard factory magazine. Tough, impact-resistant polycarbonate body and follower are self-lubricating, so they work with the constant-force spring to deliver smooth, uniform feeding for consistent operation. Smoke-tinted translucent body enables easy visual checks of ammo status. Steel hex screws anchored into brass bushings securely hold the body together to ensure exceptional strength and rigidity, yet are easily removed for disassembly and cleaning. Mfg: Black Dog Machine Llc SPECS: Injection-molded polycarbonate, smoke. Fits Ruger 10/22, .22 LR only.

more >>
Brownells
$59.99 See It
Suppressor Adapters - P22/M&P22 Suppressor Adapter

P22/M&P22 SUPPRESSOR ADAPTER Precision made to ensure alignment and avoid dangerous baffle strikes This is all you need to convert your S&W M&P 22 pistol (works with either the long or short P22 models) to use standard 1/2-28 muzzle accessories and suppressors Threaded M8 x .75 to 1/2-28 to fit any S&W M&P 22 or Walther P22 with the factory threaded barrel Includes knurled Gemtech thread protectorSIG MOSQUITO SUPPRESSOR ADAPTER M9 x .75 to 1/2-28 for SIG mosquito factory threaded barrel Includes thread protectorGSG 1911 .22 LR SUPPRESSOR ADAPTER This adapter will allow you to mount most any suppressor or muzzle accessory us Mfg: Gemtech

more >>
Brownells
$45.00 See It
Search within results
  • Find by Price
    • $ to $