1 to 2 of  2 products for ruger pistol sights

Result for "ruger pistol sights"
Mark I Air Pistol

High-power performance in a handheld, break-barrel package. With hyper-velocity .177 pellets, this single-shot, spring-piston pistol reaches speeds of 600 fps. Rifled barrel for accuracy. Fiber-optic front and rear sights for a crisp sight picture.

more >>
Cabelas
$69.99 See It
Fiber Optic Handgun Front Sights - Ruger/Buckmark Sight

Light-gathering LitePipe polymer rods work with the factory rear sight on your semi-auto to help you get on target fast, even in low-light conditions. Bright, glowing dot really catches your eye and gives a clear image of the sight/target relationship. Comes with a set of interchangeable LitePipes that let you change the sight color and dot size to match shooting conditions. Gunsmith fitting recommended. Models available for Glock®, Ruger® Mark II and III/Browning Buckmark, and Smith & Wesson M&P 9mm pistols. Mfg: Hiviz SPECS: Steel, black matte finish. All models fit factory sight dovetail. Glock fits all models except 24C. .167" (4.2mm) high, .121" wide. Rod set includes 3 red and 3 green rods. Ruger/Browning fits Ruger Mark II and III, Mark II .22/45, and Single Six, plus Browning Buckmark standard

more >>
Brownells
$34.99 See It
Additional items that match your search
Factory Magazines -10%

Extra magazines for your Ruger semiautomatic pistol direct from the manufacturer. Made of blued steel, theyre sturdy, reliable and built to the exacting specifications of your guns maker. Type: Handgun Magazines & Speed Loaders. Magazine Capacity:

more >>
Cabelas
$39.99 $35.99 See It
Factory Magazines -10%

Extra magazines for your Ruger semiautomatic pistol direct from the manufacturer. Made of blued steel, theyre sturdy, reliable and built to the exacting specifications of your guns maker. Type: Handgun Magazines & Speed Loaders. Magazine Capacity:

more >>
Cabelas
$39.99 $35.99 See It
Ruger 10/22 Fire Sights - Wgrs-Ru22 Fire Sights

All sets feature a bright red, fiber optic, front sight and fully adjustable peep or U-notch, rear sight. U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. High visibility, fast to pickup, sight systems for the Ruger® 10/22®. WGRS features low profile, guide receiver, peep sight and red, fiber optic, front sight. 3-Dot has U-notch rear blade with green dots, red front sight. Adjustable for windage and elevation. Mfg: Williams Gun Sight SPECS: Aluminum, black anodized. Front - .530'''' high, 1/16'''' red fiber optic bead. Fits Ruger 10/22 only.

more >>
Brownells
$41.99 See It
Factory Magazines -10%

Extra magazines for your Ruger semiautomatic pistol direct from the manufacturer. Made of blued steel, theyre sturdy, reliable and built to the exacting specifications of your guns maker. Type: Handgun Magazines & Speed Loaders. Magazine Capacity:

more >>
Cabelas
$39.99 $35.99 See It
Ruger 10/22 Gi-Style Aperture Sights - Tsr100 10/22 Sight Set

Replacement sight sets give your 10/22 a longer sight radius for improved accuracy potential, plus the same sight picture as an AR-15/M16 with military-issue sights. Installation requires no gunsmithing, no drilling/tapping, and no permanent alterations to the rifle. Rear sight mounts using the factory-provided holes for a scope base. All-steel front sight assembly has a standard detent-locking M16 post surrounded by protective ears that guard it from damage and misalignment. User may substitute any aftermarket post that replaces the standard A2. TSR100 set s rear sight is adjustable for windage and features close-range and long-range flip-up apertures similar to the M16A2 sight. Fo Mfg: Tech Sights, Llc. SPECS: Front Sight - steel, blued, matte finish, .53" (13.4mm) wide, .90" (23mm) high. Rear Sight - aluminum, black finish. 2.9" (7.4cm) long, .94" (24mm) tall.Sold as front/rear sight sets.

more >>
Brownells
$59.99 See It
Ruger Scout Rifle Rail - Ruger Scout Rifle Rail With Sight

Full-length Picatinny rail bolts to the Ruger Gunsite Scout Rifle (GSR) with no gunsmithing required Provides a stable platform for standard optics over the receiver or for Intermediate Eye Relief scopes mounted farther forward in the classic scout configuration preferred by Jeff Cooper Built-in adjustable rear aperture is a handy backup sight For Ruger GSR only; 11 1/2" L; includes hardware and threadlocker Mfg: Xs Sight Systems

more >>
Brownells
$81.00 See It
Carbide Semi-Auto Pistol Sight Base Cutter - 60°carbide Semi-Auto Sight Base Cutter

Our special 65° shoulder Sight Base Cutter designed to cut dovetails for both standard Colt factory and mil-spec 1911 Autos, and for replacement sights like Wichita Hi-Mount, older Bo- Mar and others with a 65° shoulder. Some makers use a 60° dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the Standard Sight Base Cutter shown on this page. Actual cutting diameter is .330'''' so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. CAUTION: For use in milling machine only. Solid carbide cutter resists wear when cutting pistol Mfg: Brownells

more >>
Brownells
$85.99 See It
Factory Magazines -28%

Extra magazines for your Ruger semiautomatic pistol direct from the manufacturer. Made of blued steel, theyre sturdy, reliable and built to the exacting specifications of your guns maker. Type: Handgun Magazines & Speed Loaders. Magazine Capacity:

more >>
Cabelas
$49.99 $35.99 See It
Ruger 10/22 Gi-Style Aperture Sights - Tsr200 10/22 Sight Set

Replacement sight sets give your 10/22 a longer sight radius for improved accuracy potential, plus the same sight picture as an AR-15/M16 with military-issue sights. Installation requires no gunsmithing, no drilling/tapping, and no permanent alterations to the rifle. Rear sight mounts using the factory-provided holes for a scope base. All-steel front sight assembly has a standard detent-locking M16 post surrounded by protective ears that guard it from damage and misalignment. User may substitute any aftermarket post that replaces the standard A2. TSR100 set s rear sight is adjustable for windage and features close-range and long-range flip-up apertures similar to the M16A2 sight. Fo Mfg: Tech Sights, Llc. SPECS: Front Sight - steel, blued, matte finish, .53" (13.4mm) wide, .90" (23mm) high. Rear Sight - aluminum, black finish. 2.9" (7.4cm) long, .94" (24mm) tall.Sold as front/rear sight sets.

more >>
Brownells
$69.99 See It
Factory Magazines -28%

Extra magazines for your Ruger semiautomatic pistol direct from the manufacturer. Made of blued steel, theyre sturdy, reliable and built to the exacting specifications of your guns maker. Type: Handgun Magazines & Speed Loaders. Magazine Capacity:

more >>
Cabelas
$49.99 $35.99 See It
Lc380 7-Round Magazine

This is a 380 Caliber, 7-round alloy steel magazine for the Ruger® LC380 Pistol. Each magazine comes with a standard baseplate and an interchangeable baseplate with a pinky extension. Mfg: Ruger

more >>
Brownells
$32.99 See It
Factory Magazines -19%

Extra magazines for your Ruger semiautomatic pistol direct from the manufacturer. Made of blued steel, theyre sturdy, reliable and built to the exacting specifications of your guns maker. Type: Handgun Magazines & Speed Loaders. Magazine Capacity:

more >>
Cabelas
$49.99 $40.49 See It
Ruger® Mark I/Ii/Iii Black Max Holster - High-Rider Holster

Rugged and lightweight polymer composite holster holds a Ruger Mark series .22 LR pistol with or without optics. Reversible design allows the holster to be worn on the left or right side. Adjustable retention system accommodates almost any version of the Mark series. Fully covered triggerguard for added safety. Slick interior ensures a smooth, fast presentation, and reholstering. Front cut opening provides clearance for optics and lets the barrel clear the holster quickly during the draw, so you can get on target faster. High-Ride model sits right at the hip. Low-Ride model sits approximately 2" below the hip. Mfg: Tactical Solutions, Llc SPECS: Thermo-molded polymer, black. Fits belts up to 2" wide. Fits Ruger Mark I, Mark II, Mark III, & 22/45 .22 LR pistols.

more >>
Brownells
$26.99 See It
Factory Magazines -19%

Extra magazines for your Ruger semiautomatic pistol direct from the manufacturer. Made of blued steel, theyre sturdy, reliable and built to the exacting specifications of your guns maker. Type: Handgun Magazines & Speed Loaders. Magazine Capacity:

more >>
Cabelas
$49.99 $40.49 See It
Ruger® Mark I/Ii/Iii Speed Strip Kit - Speed Strip Kit 3.2

Makes field stripping your Ruger .22 pistol faster and easier by enabling rapid disassembly with a single Allen wrench for routine cleaning and maintenance. Replaces the factory hammer and sticky bolt stop pin that make bolt removal a real chore. Replacement parts are precision machined from high-grade stainless steel to tolerances that meet or exceed the factory parts. Requires no permanent modification to your pistol; gunsmith installation recommended. The 3.2 Conversion Kit will fit any Ruger .22 Auto Pistol and allows MK III owners to safely omit the magazine disconnect feature. This kit is supplied with a new hammer pivot bushing, which reduces pre-travel by 65%. Mfg: Majestic Arms, Ltd. SPECS: Stainless steel, natural silver finish. Kit includes replacement hammer and bolt stop pin, plus Allen wrench and illustrated installation instructions. Mark I/II fits Ruger Mark I, II, and 22/45 pistols. Mark III fits Ruger Mark III pistol only. 3.2 Kit fits all Ruger .22 Auto Pistols

more >>
Brownells
$54.99 See It
Factory Magazines -19%

Extra magazines for your Ruger semiautomatic pistol direct from the manufacturer. Made of blued steel, theyre sturdy, reliable and built to the exacting specifications of your guns maker. Type: Handgun Magazines & Speed Loaders. Magazine Capacity:

more >>
Cabelas
$49.99 $40.49 See It
Factory Magazines -10%

Extra magazines for your Ruger semiautomatic pistol direct from the manufacturer. Made of blued steel, theyre sturdy, reliable and built to the exacting specifications of your guns maker. Type: Handgun Magazines & Speed Loaders. Magazine Capacity:

more >>
Cabelas
$49.99 $44.99 See It
Factory Magazines -10%

Extra magazines for your Ruger semiautomatic pistol direct from the manufacturer. Made of blued steel, theyre sturdy, reliable and built to the exacting specifications of your guns maker. Type: Handgun Magazines & Speed Loaders. Magazine Capacity:

more >>
Cabelas
$49.99 $44.99 See It
Search within results