1 to 20 of  41 products for ruger rifles

Result for "ruger rifles"
Scout 308/7.62 Magazines - Magazine, Scout Rifle, 5-Round

Features: 10, 5, and 3 shot magazines for the Ruger Gunsite Scout Rifle Constructed of durable glass-filled nylon Stainless steel spring Snap-on dust cover included Not recommended for use with other M24/M40/AICS-style systemsBenefits: Factory Ruger magazine for use in your Scout Rifle Dust cover keeps the magazine internals clean and allows long-term storage of the magazine while loaded Mfg: Ruger SPECS: Fits Ruger Gunsite Scout Rifles.

more >>
Brownells
$29.99 See It
Scout 308/7.62 Magazines - Magazine, Scout Rifle, 10-Round

Features: 10, 5, and 3 shot magazines for the Ruger Gunsite Scout Rifle Constructed of durable glass-filled nylon Stainless steel spring Snap-on dust cover included Not recommended for use with other M24/M40/AICS-style systemsBenefits: Factory Ruger magazine for use in your Scout Rifle Dust cover keeps the magazine internals clean and allows long-term storage of the magazine while loaded Mfg: Ruger SPECS: Fits Ruger Gunsite Scout Rifles.

more >>
Brownells
$29.99 See It
Bolt Action Rifle Trigger - Ruger 77 (W/Tang Safety) Trigger

Adjustable, Featherweight-style, single-stage, replacement triggers for popular bolt action rifles deliver clean, crisp trigger pulls that help improve accuracy. Precision machined and hardened internal parts for maximum reliability. Adjustable for weight of pull (1-1/2-4 lb.), creep and overtravel. Lock nuts hold settings. Winchester 70 fits Pre-and Post-64 Model 70; Model 54 requires gunsmith fitting. Uses factory safety. Winchester 70 MOA fits Winchester Model 70s with MOA trigger group made since 2008. Adjustable pull weight from 1-3 pounds. Adjustable for over-travel.Ruger 77 fits models with tang safety, connects to Ruger safety button. Right hand only, will not fit current pro Mfg: Timney SPECS: Aluminum housing. Heat-treated steel internals. Polished sear/trigger surfaces. Serrated .250" (6.3mm) wide shoe. All except CZ models include instructions.

more >>
Brownells
$113.99 See It
Scout 308/7.62 Magazines - Magazine, Scout Rifle, 3-Round

Features: 10, 5, and 3 shot magazines for the Ruger Gunsite Scout Rifle Constructed of durable glass-filled nylon Stainless steel spring Snap-on dust cover included Not recommended for use with other M24/M40/AICS-style systemsBenefits: Factory Ruger magazine for use in your Scout Rifle Dust cover keeps the magazine internals clean and allows long-term storage of the magazine while loaded Mfg: Ruger SPECS: Fits Ruger Gunsite Scout Rifles.

more >>
Brownells
$29.99 See It
Bolt Action Rifle Trigger - Winchester 70, Blue Trigger

Adjustable, Featherweight-style, single-stage, replacement triggers for popular bolt action rifles deliver clean, crisp trigger pulls that help improve accuracy. Precision machined and hardened internal parts for maximum reliability. Adjustable for weight of pull (1-1/2-4 lb.), creep and overtravel. Lock nuts hold settings. Winchester 70 fits Pre-and Post-64 Model 70; Model 54 requires gunsmith fitting. Uses factory safety. Winchester 70 MOA fits Winchester Model 70s with MOA trigger group made since 2008. Adjustable pull weight from 1-3 pounds. Adjustable for over-travel.Ruger 77 fits models with tang safety, connects to Ruger safety button. Right hand only, will not fit current pro Mfg: Timney SPECS: Aluminum housing. Heat-treated steel internals. Polished sear/trigger surfaces. Serrated .250" (6.3mm) wide shoe. All except CZ models include instructions.

more >>
Brownells
$124.99 See It
Tactical Picatinny Ruger Ranch Rifle Scope Rail

FREE SHIPPING Orders $50+

This ProMag Tactical Picatinny Scope Mount quickly attaches to the Ruger Mini-14 Ranch, Mini-30, 6.8 Ranch rifles. The mount provides additional flexibility when mounting longer scopes, electronic sights or night vision.

more >>
Overstock Main
$52.99 See It
Remington/Ruger® Firing Pin Disassembly Tool - Firing Pin Disassembly Tool

Machined aluminum and steel tool keeps the firing pin spring in place while you remove the cocking piece from the firing pin assembly of Remington and Ruger bolt action rifles. Just insert the firing pin assembly into the housing, tighten the threaded steel shaft to compress the spring, press out the cross-pin, and gradually unscrew the shaft to relieve spring tension. Recessed ends and a wide shoulder on the shaft protect the firing pin tip as the tool presses on the bolt face. Mfg: Gun Runners SPECS: Aluminum body, natural finish, steel threaded compression shaft, matte blued finish. 10¼" (26cm) OAL opened, 8¼" (21cm) OAL closed, 1" (2.54cm) wide, 1" high. Fits Remington 600, 700, 710, 721, 722, Model Seven, XP-100, M24, and 40X; Ruger M77® and M77 Ma

more >>
Brownells
$29.99 See It
Ruger Embroidered .10/.22 Rifle Case -10%

Next time you're loading up your rifle for a trip to the shooting range or deer stand, slip it into the ALLEN Ruger Embroidered .10/.22 Rifle Case: 40 in. (275-40). Your gun will be protected by a durable Endura fabric shell and 7/8 foam padding.

more >>
Kmart
$24.99 $22.49 See It
10/22 Bull Barrel Channel Overmolded Rifle Stocks - Ruger 10/22 Stock, B/B Rubber Covering

Cushioned rubber or nylon outer skin provides non-slip, shooting comfort; internal fiberglass body gives solid support, is lightweight and easy to carry. Fully-inletted for a drop-in fit; models available to fit nominal .920" diameter bull barrels (B/B). Straight comb; wide, varmint-style forend with finger grooves, cobblestone finish on grip and forend; dual palm swells and recurve pistol grip make this stock as comfortable to shoot as it is practical. Includes rubber recoil pad, and front and rear sling studs. Mfg: Hogue SPECS: Fiberglass with Nylon or Rubber covering, 29" (73cm) long, 13¾" (35cm) length of pull, 1¼" (2.8cm) drop at heel, 1.9 (.86kg) wt. fits Ruger 10/22.

more >>
Brownells
$69.99 See It
Ruger Embroidered .10/.22 Rifle Case Black -13%

Up to 40% OFF Fitness

Next time you're loading up your rifle for a trip to the shooting range or deer stand, slip it into the ALLEN Ruger Embroidered .10/.22 Rifle Case: 40 in. (275-40). Your gun will be protected by a durable Endura fabric shell and 7/8" foam padding.

more >>
Sears
$24.99 $21.67 See It
Company Ruger 40 inch Standard Grade Rifle Case

FREE SHIPPING Orders $50+

This Ruger Standard Grade Rifle Case from Allen Company features a black color with a soft interior and a zipper closure. This gun case also spotlights a 42-inch length, and a foam and Endura shell construction.

more >>
Overstock Main
$31.99 See It
Allen Cases Ruger 46 inch Black Standard Rifle Case

FREE SHIPPING Orders $50+

This Ruger 46-inch Standard Rifle Case from Allen Company features a black color and a soft lining. This rifle case also spotlights #8 zippers and a durable Endura and 7/8-inch foam construction.

more >>
Overstock Main
$33.49 See It
Ruger® 77/M77® Mark Ii Bedding Pillars - Ruger 77/M77 Mark Ii Bedding Pillars

Pre-machined aluminum pillars solve the difficult problem of bedding Ruger bolt action centerfire rifles. The front pillar is cut to match the 60 degree angle of the receiver screw; pre-notched with the correct contour and angles to fit against the bottom of the recoil lug and set square with the floorplate hinge. Fits all Ruger 77 and M77 Mark II rifles except VT target models. Mfg: Brownells SPECS: Aluminum, natural finish. Front - .600'''' (15.2mm) long, .535'''' (13.6mm) dia. Rear - 1.145'''' (2.9cm) long, .535'''' (13.6mm) dia.

more >>
Brownells
$12.99 See It
Semi-Auto Rifle Recoil Pad - Car-15 Recoil Pad

Increases stock length to better fit shooters with long arms. Provides a cushioned, recoil absorbing, non-slip surface. Replaces original pad with no permanent alterations. AR-15/M16 model fits A-1 and A-2 trap door buttstocks; adds ¾" length. CAR-15 model fits collapsible stock; adds ¾". M14/M1A adds 7/8". M-1 Garand model adds 7/8". Ruger® model fits 10/22®, Mini-Thirty®, Model 96™, does not fit Mini-14 with serial numbers begining at 580 and higher. Mfg: John Masen SPECS: Polyethylene rubber, black. Serrated face.

more >>
Brownells
$12.99 See It
Ruger® 10/22® Trigger Guard 2000 - Fits .22 Long Rifle, Black

Completely new, CNC machined trigger housing with precision EDM trigger parts all pre-fitted and ready to drop-in, for a crisp, clean trigger pull. Hardened EDM sear and disconnector have tolerances held to +/- .0002''''. Hardened stainless steel hammer has notches surface ground to achieve the correct engagement angles, provides long-wearing performance. Reduced power hammer and sear springs lighten pull. Trigger includes overtravel adjustment. Hardened, polished trigger plunger is repositioned to depress directly to the rear as trigger is pulled; plunger spring is redesigned for better response. Oversized hammer, sear and action pins remove wobble that ruins a great action Mfg: Volquartsen SPECS: Aluminum housing, anodized black or silver, matte finish. Hammer - 440C stainless steel, hardened to Rc 58-59. Sear - A2 tool steel, Rc 60. Ship wt. 2 lb.

more >>
Brownells
$224.99 See It
Semi-Auto Rifle Recoil Pad - Ar-15/M16 Recoil Pad

Increases stock length to better fit shooters with long arms. Provides a cushioned, recoil absorbing, non-slip surface. Replaces original pad with no permanent alterations. AR-15/M16 model fits A-1 and A-2 trap door buttstocks; adds ¾" length. CAR-15 model fits collapsible stock; adds ¾". M14/M1A adds 7/8". M-1 Garand model adds 7/8". Ruger® model fits 10/22®, Mini-Thirty®, Model 96™, does not fit Mini-14 with serial numbers begining at 580 and higher. Mfg: John Masen SPECS: Polyethylene rubber, black. Serrated face.

more >>
Brownells
$13.99 See It
Ruger 10/22® Rifle Tune-Up Kits - Reduced Power Tune-Up Pak

Reduced Power Tune-Up Pak fits 10/22 in all calibers. Includes an extra power hammer spring, reduced power trigger spring, and reduced power sear spring to improve let-off and reduce trigger pull, perfect for competition. Tune-Up Pak fits all calibers of 10/22. Includes an extra power hammer spring, extra power trigger spring, and reduced power sear spring for a clean, crisp trigger pull, perfect for hunting. For an even smoother, lighter-feeling trigger pull, install the reduced power (RP) trigger/sear spring. Tune-Up Paks do not include recoil springs. Mfg: Wolff

more >>
Brownells
$9.00 See It
100 Round Rifle Case-Gard With Flip-Top - 100 Round Case-Gard W/Flip-Top-308 Family-Clear Blue

Designed for great afternoon of varmint or competitive shooting. Made of virtually indestructible polypropylene that will not warp, crack, chip, peel, expand or contract, MTM CASE-GARD rifle ammunition cases are still the first choice of rifle enthusiasts throughout the world. Mechanical hinge that is guaranteed for 25 years. Snap-Lock latch protects contents from accidental spilling. Textured finish makes it easier to grip and harder to scratch. Each ammo box is supplied with a load label for recording load and sight data. Mfg: Mtm SPECS: Cartridge Sizes-17 Fireball, 17 / 221 / 222 / 223 Rem., 204 Ruger, 218 Bee, 22 Hornet, 222 Rem. Mag., 223 Rem. HP, 25-20 Win., 300 Sherwood, 300 Wisper, 32 Ideal, 32 / 401 Win. S.L., 351 WSL, 38-55 Win., 6x47, 6mm TCU, 6mm-223 Rem.

more >>
Brownells
$5.49 See It
10/22 25rd 22lr Hc3rd Rapid Reload Magazine - 10/22 25rd Magazine

Features: 25 round 10/22 magazine Capable of holding 45 rounds on the magazine Integrated ammo pocket holds 20 rounds in addition to the 25 rounds inside the magazine Assembled with stainless fasteners High impact formulated composite resin body not glued plastic Hardened stainless steel feeding lips Reliable single stack magazine Proprietary constant-force spring Anodized aluminum thumb assist, for ease of manual reloading Strips down easy for cleaning Mfg: Hc Mags Llc SPECS: Fits Ruger 10/22 rifles and variants. 22 Long Rifle. Composite resin body construction with stainless steel fasteners. Hardened MIM stainless steel feed lips. Length – 8.5”. Weight (unloaded) – 6.1oz. 25 round capacity with an additional 20 rounds in the ammo pocket.

more >>
Brownells
$39.95 See It
Hammer Extensions - 2456 Hammer Extension

Knurled surface gives extra purchase to easily cock external-hammer rifles equipped with low mount scopes. Just slip over the hammer spur and clamp in place with Allen screws. May be right- or left-hand mounted. Mfg: Uncle Mikes SPECS: Steel, matte black finish. 1 ¼'''' (3cm) long, 3/8'''' (9.3) diameter. 2450 fits Win. 94 and Big Bore, Ithaca X-Caliber, and Henry lever action rimfire rifles. 2451 fits Win. 94/22. 2452 fits Marlin lever action 1957-1982. 2456 fits H&R Topper, N.E.F. Handi Rifle, Ruger Blackhawk. 2458 fits

more >>
Brownells
$8.49 See It
Search within results