1 to 20 of  63 products for saw blade arbor size

Result for "saw blade arbor size"
ROBERTS 1056 Longneck Jamb Saw, 6 3/16 In, 120V, 7.5 Amp

Longneck Jamb Saw, 120V, 60 Hz, 7.5 Amp Motor, 8000 No Load RPM, 6 3/16 In. Carbide Tooth Blade, Arbor Size 5/8 In. Dia, Blade Adapter 20mm, Height Adjustment from 0 to 11/16 In., Trims Wood Door Jambs And Base Boards, Cuts Inside Corners And Under Toe...

more >>
Zoro
$165.73 See It
Q.E.P. Bridge Tile Saw - 24 Inch, Model 83200

Great features and a great price make this bridge tile saw the right choice for you. 1-year limited warranty. Arbor Size in. 5/8, Engine Speed RPM 3,550, Speed - No Load RPM 1,100, Blade Diameter in. 8, Cutting Thickness in. 1 3/4, Cutting Length in....

more >>
Northern Tool
$299.99 See It
Circular Saw Blades: Diablo Saw Blades 1 in. x 5/8 in. Saw Blade Bushing D58XXX

Shop for Tools & Hardware at The Home Depot. Diablo's saw blade bushings are manufactured for precision and maximum results. They allow you to adapt or reduce the arbor size of a variety of saw blades. This bushing has a 1 in. outside diameter and a...

more >>
HomeDepot.com
$4.96 See It
Wet Cut Masonry Saw - 5in, Model 4101RH

This wet-cutting masonry saw cuts through tile, masonry, concrete and more Powerful 7.9 Amp motor cuts up to 1 5/8in. at 90, and 1in. at 45. Airtight cover keeps water out of motor housing. Arbor Size in. 3/4, Blade Diameter in. 4 3/8, Amps 7.9,...

more >>
Northern Tool
$379.99 See It
Replacement Diamond Blade for Item# 999605 - 14 Inch, Model MK-BX10

Premium dry-cutting diamond replacement blade for BX3 masonry saw, Item# 999605. 14in. diameter with 1in. arbor and 110in. width. Blade Diameter in. 14, Cutting Styles Dry, Recommended Use Masonry, Blades qty. 1, Arbor Size in. 1, Blade Type Segmented,...

more >>
Northern Tool
$169.99 See It
OPTIMUM CS350 Cold Saw,14 In. Blade,11/4 In. Arbor G9809895

Cold Saw, Voltage 230, Blade Dia. 14 In., Arbor Size 11/4 In., 62 to 125 No Load RPM, 6 Amps, Cutting Capacity 45/16 In., Pivoting Fence Angle 45 Degrees , Guard Type Fully Enclosed Cast, Handle Type Metal, Tool Weight 518 lb., Application Precision... Cast Iron

more >>
Zoro
$2,673.00 See It
Baileigh TS-1248P-52 Professional Cabinet Saw

When looking for a truly professional cabinet table saw, good capacity and power are a must.  The TS-1248P is a 12" diameter blade table saw that is available in two different sizes.  The TS-1248P-36 has a 36" right side rip capacity, while the TS-1248P-52 has an extension for 52" right side rip capacity.  Both run on 220 volt single phase 5hp motor that produces 3600 rpm.  Because of the extra power the TS-1248P has a 1" arbor that tilts 45 degrees to the left.  To make operation even easier the bevel has a digital readout for increased accuracy.Another unique feature of the TS-1248P series is the rip fence that incorporates a digital readout for rip capacity.  Just “zero" the DRO at the blade and away you go.  No second guessing the length of cut.  The table and extensions for the TS-1248P are made from precision ground cast iron.  These tables are placed upon a super rigid all steel base for accurate alignment.  The Other standard features to the TS-1248P series are; miter gauge, standard and dado inserts, deluxe rip fence and 4" dust collection port.  For more information contact a Baileigh Industrial representative today.SpecificationsDust Collection Port4"Number of Outlets 1Table Size (Length)24.4"Table Size (Width)30.7"Table Saw Working Table64.4" x 30.7"Table Saw Blade Diameter12"Table Saw RPM3600Tabe Saw Arbor1"Table Saw Cutting Height at 90º4"Table Saw Cutting Height at 45º23/4"Maximum Dado Diameter8"Maximum Dado Width13/16"Maximum Rip Cut (right)52"Power220V, 1PHLength49"Width32"Height37"Horse Power5HPWeight (Ibs)700    

more >>
Elite Metal Tools
$3,284.40 See It
Baileigh STS-14120-CNC Table Saw

The STS-14120-CNC table saw from Baileigh Industrial is based from our other sliding table saw designs, but adds a CNC twist.  The CNC function really helps with accuracy and efficiency of any project.  The 5.7" CNC touchscreen control has a 300 profile memory capacity.  It controls the cutting width, blade tilting, and main saw blade height. The scoring blade height is also motorized.This class leading sliding table saw has all the features the most discerning shop could want.  The STS-14120-CNC comes standard with a 12" blade but will take a 14" blade without modification and turns on a 1" arbor.  The 7.5 hp 220 volt three phase motor has four speeds in which it will cut, by moving the belts.  The rpm range is between 3000 and 6000 rpm with a digital readout.  A 1 hp scoring blade is also standard and spins at 8000 rpm to ensure a crisp, clean cut.The STS-14120-CNC has a 15’ x 125" sliding table.  The fully extruded table slides on four precision shafts for the greatest accuracy smoothest slide possible.  All fences are included as well as a deluxe saw guard with dust port are standard.  There is also a 4" main dust channel to keep the shop clean.  A tool frame and safety bar round out this great package.SpecificationsDust Collection Port3" & 5"Number of Outlets2Table Size (length)126"Table Size (width)15"RPM3000/4000/5000/6000Max Stock Width51"Table Saw Blade Diameter12"Table Saw Cutting Height at 90º3.93"Table Saw Cutting Height at 45º2.75"Table Saw Scoring Blade Diameter4.5"Table Saw Scoring Blade Arbor7/8"Power220V, 3PHLength132"Width52"Height40"Horse Power7.5"Wieght (Ibs)2250 

more >>
Elite Metal Tools
$23,987.00 See It
Baileigh Non-Ferrous Metal Cutting Cold Saw CS-355SA

When cutting non-ferrous material, such as aluminum or copper, you need a high speed cut off saw to ensure a great cut every time.  The CS-355SA semi-automatic high speed cut off saw from Baileigh Industrial is a great choice because of the 220 volt three phase, 5.5hp high speed motor that turns 3200 RPM, which is perfect for cutting those soft metals known for gumming up blades. The CS-355SA has a maximum capacity of 4-1/4" round at 90 degrees, and the ability to miter from 45 degrees to the right to 90 degrees on the left, this is the perfect saw for any shop.Operation of the CS-355SA semi-automatic cut off saw could not be easier, simply place the material in the vise and push the foot pedal.  The vise will clamp the material; the blade will start up and lower itself cutting the material.  Once the cut is complete the blade will shut off and the head will raise back up.  This process save time and effort of the operator and will also make the shop more efficient as well as prolong blade life due to the consistent decent speed.Based off of the CS-350M cold saw that has been a staple in the Baileigh Industrial line for a long time, the CS-355SA is built to last.  The only difference between the two is how the blade is driven; the CS-355SA’s motor drives a belt to achieve maximum RPMs as quickly as possible with few moving parts to break down.  A self centering vise also comes standard on the CS-355SA, so there are no changes to make when changing diameters of tube or pipe. So the material is securely held in place there is a jaw on both the left and right sides of the blade.  A flood coolant system is also included to help with the quality of cut.SpecificationsMax. Blade Diameter14"Operation Semi-Automatic Head Miter 90° Slotting, 45° Left / 45° RightRound Solid at 45°1.575"Square Tube 45°2.953" x 2.953"Round Tube 45°2.953"Rectangle Tube at 45°2.953" x 2.362"Round Solid at 90°2.362"Rectangle Tube at 90°4.25" x 3.5"Square Tube at 90°4.25" x 4.25"Round Tube at 90°4.331"Coolant SystemYesSlotting Capable Yes, Left and Right Vice Style Dual Action, Self Centering Max. Vice Opening 6.5"Head Style Pivot Arbor Size 1"Motor 5.5 hpBlade Speed 3200 (rpm) Power 220 V / 3-phase Shipping Weight 798 lbs. Shipping Dimensions 60" x 44" x 48" 

more >>
Elite Metal Tools
$8,275.00 See It
Baileigh STS-14120 Sliding Table Saw

When Baileigh Industrial does something we do it right, the STS-14120 is no exception.  This class leading sliding table saw has all the features the most discerning shop could want.  The STS-14120 comes standard with a 12" blade but will take a 14" blade without modification and turns on a 1" arbor.  The 7.5 hp 220 volt three phase motor has three speeds in which it will cut, by moving the belts.  The rpm range is between 3000 and 5000 rpm with a digital readout.  A 1 hp scoring blade is also standard and spins at 8000 rpm to ensure a crisp, clean cut.The STS-14120 has a 15’ x 125" sliding table.  The fully extruded table slides on four precision shafts for the greatest accuracy possible.  The blade tilting uses a manual hand wheel system with digital readout for telling the degrees.  All fences are included as well as a deluxe saw guard with dust port are standard.  There is also a 4" main dust channel to keep the shop clean.SpecificationsDust Collection Port3" & 5"Number of Outlets2Table Size (Length)126" Table Size (Width)15"RPM 3000/4000/5000Max Stock Width51"Table Saw Blade Diameter12"Table Saw Arbor1"Table Saw Cutting Height at 90º4.125"Table Saw Cutting Height at 45º2.75"Table Saw Scoring Blade RPM8000Table Saw Scoring Blade Diameter4.5"Table Saw Scoring Blade Arbor7/8"Power220V, 3PHLength132" Width52"Height40"Horse Power7.5HPWeight (Ibs)2250 

more >>
Elite Metal Tools
$11,845.00 See It
Baileigh STS-14120-DRO Sliding Panel Saw

The STS-14120-DRO sliding panel saw is essentially the same class leading model as our STS-14120 but includes user friendly digital readout on the rip fence as well as two digital readouts on the crosscut fence.  These two features alone will increase productivity of your shop.  The STS-14120-DRO comes standard with a 12" blade but will take a 14" blade without modification and turns on a 1" arbor.  The 7.5 hp 220 volt three phase motor has three speeds in which it will cut, by moving the belts.  The rpm range is between 3000 and 5000 rpm with a digital readout.  A 1 hp scoring blade is also standard and spins at 8000 rpm to ensure a crisp, clean cut.Like the STS-14120 the STS-14120-DRO has a 15’ x 125" sliding table with a 20" x 40" cast iron fixed lower table.  The fully extruded table slides on four precision shafts for the greatest accuracy possible.  The blade tilting uses a manual hand wheel system with digital readout for telling the degrees.  All fences are included as well as a deluxe saw guard with dust port are standard.  There is also a 4" main dust channel to keep the shop clean. SpecificationsDust Collection Port3" and 5"Number Of Outlets2Table Size (Length)126"Table Size (Width)15"Rpm3000/4000/5000Max Stock Width51"Table Saw Blade Diameter14"Table Saw Arbor1"Table Saw Cutting Height at 90 Degrees4.125"Table Saw Cutting Height at 45 Degrees2.75"Table Saw Scoring Blade RPM8000Table Saw Scoring Blade Diameter4.5"Table Saw Scoring Blade Arbor7/8"Power220V Three PhaseLength132"Width52"Height40"Horse Power7.5Weight (lbs)2250 

more >>
Elite Metal Tools
$13,433.40 See It
DW71080A 10" 80T Fine Cross Cuts Table Full Kerf Wood Working Saw Blade

Woodworking Blades - 10" 80T 10-DEG ATB Ultra Fine Cross Cuts Table Saw Full Kerf.Features: * Large C4 micro-grain carbide teeth are precision-ground with fine-grit diamond wheels so each tooth planes the wood for an exceptionally smooth finish. * Heavy-gauge laser-cut hardened and tempered steel plate is precision-balanced for accurate cuts producing tight joints. * Ultra-sharp cutting edges dramatically reduce splintering and tear-out. * Extra-hard carbide ensures that cutting edges stay sharp. * Laser-cut expansion slots minimize noise and edge vibration for excellent surface finish. * Woodworking Blade Re-sharpening Service re-sharpens blades to original factory specifications to extend the overall life of the blade.Specifications: * Diameter 10" * Teeth 80 Arbor Size 5/8" * Hook Angle 10 * Kerf.125" * Plate Thickness.087" * Tooth Grind ATB * Max Speed 6000 rpmPackage Dimensions: * Length 11.810 in * Width 0.630 in * Height 11.

more >>
Factory Authorized Outlet
$104.99 See It
Woodstock W1820 Shop Fox® Cabinet Saw w/ Riving Knife & Long Rails

Every part of this saw says quality and performance. From the heavy cast iron trunnions, 3 HP Leeson® motor and triple belt drive to the massive cast iron table and wings, this table saw is built to last a lifetime. You'll also appreciate the camlock T-fence, riving knife, heavy cast handwheels, magnetic switch, T-slot miter gauge with fence extension and flip stop and 4" dust collection port. A true riving knife follows the up and down and tilt movement of the blade. Features an extra 50" rip capacity - more than enough to rip to the center of a standard sheet of plywood, long extension table with adjustable legs, square steel tubing frame and dimensionally stable top. CSA certified meeting CSA C22.2 #71.2-08 and UL 987 standards!Specifications:Motor: 3 HP, 230V, single-phaseAmps: 12.8Blade tilt: LeftArbor size: 5/8"Arbor speed: 4300 RPMMaximum depth of cut @ 90°: 3-1/8"Maximum depth of cut @ 45°: 2-3/16"Maximum rip capacity: 50"Maximum dado width: 13/16"Precision ground and polished cast iron table and wingsCast iron table size: 27" x 40-1/4"Table size with extension: 27" x 74"Table height from floor: 34"Massive cast iron trunnionsQuick release riving knife, blade guard and splitter assemblyAdjustable T-slot miter gauge with anodized fence extension and flip stopWide span easy glide T-fence systemCamlock fence with Phenolic faceNylon runners inside fence head assemblyKnurled knobs for fine fence adjustmentsSloped inner cabinet floor for efficient dust transport4" dust port with trap door openingIncludes standard & dado table insertsAccessory hooksMotor guardPowder coated paintMagnetic switch with thermal overload protectionOverall dimensions: 82" L x 45-1/2" W x 40" HApproximate shipping weight: 579 lbs.

more >>
Elite Metal Tools
$1,997.78 See It
Woodstock W1811 Shop Fox® 10" Sliding Table Saw - 5HP Single Phase

Made for cutting wide panels with ease and accuracy, this 10" Sliding Table Saw features a scoring blade to eliminate cross grain tear-out, a 63" long crosscut capacity, fully adjustable miter fence with two swing stops, adjustable extruded fence, adjustable riving knife and large blade guard with integral dust port. This 10" Sliding Table Saw makes quick work of all standard plywood panels. Accepts 10" saw blades with 5/8" arbor bores. CSA certified meeting CSA C22.2 #105-1953 standards!Specifications:Motor: 5 HP, 230V, single-phase, TEFC, 3450 RPM, 19ABlade tilt: 0° - 45°Table size without extension wings: 27"L x 14-3/8"WTable size with extension wings: 47"L x 40"WSliding table size: 63"L x 12-1/4"WMain blade arbor speed: 4000 RPMMain blade diameter: 10"Main blade arbor diameter: 5/8"Scoring blade diameter: 3-1/8"Scoring blade arbor diameter: 22mmScoring blade arbor speed: 8000 RPMMaximum dado width: 13/16"Maximum depth of cut at 90°: 3-1/8"Maximum depth of cut at 45°: 2-1/4"Maximum ripping width with standard rip fence: 33"Maximum cross cutting width with crosscut fence: 78-1/2"Maximum cross cutting length with crosscut fence: 63"Overall dimensions: 76"L x 124-3/4"W x 46"HDust port size: 2-1/2" with blade guard, 4" mainShielded and lubricated bearingsSwitch: magnetic w/ thermal overload protectionApproximate shipping weight: 687 lbs.

more >>
Elite Metal Tools
$3,330.40 See It
DC390K Heavy-Duty 6-1/2" 18V Cordless Circular Saw Kit

For a Limited Time GetFree Ground ShippingThe DC390K Features: * Powered by the DEWALT 18V"system" of battery packs. * 6-1/2" blade cuts 2X materials (ex. 2x4) at 45 degrees in a single pass. * Left side blade provides maximum visibility to the cut line. * 50 degree bevel provides additional capacity for specialty applications. * DEWALT-built high-performance motor with fan cooling delivers maximum power and durability. * Spindle lock for easy blade changes. * Replaceable brushes for longer motor life. *. * Heavy - duty kit box provides protection and transport for the saw.Specifications: * Voltage: 18 V * No Load Speed: 0-3,700 rpm * Blade Diameter: 6-1/2" * Ft./Min.: 35 * Arbor Size: 16 mm * Bevel Capacity: 50 Degrees * Depth Of Cut At 45 Degrees: 1- 5/8" * Depth Of Cut At 90 Degrees: 2-1/4"Includes: * DW9116 one hour charger with Automatic Tune-Up Mode (1) 18V XRP battery pack. * 16 tooth carbide saw blade * Blade wrench * Rip fence

more >>
Factory Authorized Outlet
$217.99 See It
DW71060T 10" 60T Fine Cross Cuts Table Full Kerf Wood Working Saw Blade

Woodworking Blades - 10" 60T 12-DEG TCG, Fine Cross Cuts Table Saw Full Kerf.Features: * Large C4 micro-grain carbide teeth are precision-ground with fine-grit diamond wheels so each tooth planes the wood for an exceptionally smooth finish. * Heavy-gauge laser-cut hardened and tempered steel plate is precision-balanced for accurate cuts producing tight joints. * Ultra-sharp cutting edges dramatically reduce splintering and tear-out. Extra-hard carbide ensures that cutting edges stay sharp. * Laser-cut expansion slots minimize noise and edge vibration for excellent surface finish. * Woodworking Blade Re-sharpening Service re-sharpens blades to original factory specifications to extend the overall life of the blade.Specifications: * Diameter 10" * Teeth 60 * Arbor Size 5/8" * Hook Angle 12 * Kerf.125" * Plate Thickness.087" * Tooth Grind TCG * Max Speed 6000 rpmPackage Dimensions: * Length 11.810 in * Width 0.630 in * Height 11.810 i

more >>
Factory Authorized Outlet
$85.99 See It
DW71060A 10" 60T Fine Cross Cuts Table Full Kerf Wood Working Saw Blade

Woodworking Blades - 10" 60T Fine Cross Cuts Table Saw Full Kerf.Features: * Large C4 micro-grain carbide teeth are precision-ground with fine-grit diamond wheels so each tooth planes the wood for an exceptionally smooth finish. * Heavy-gauge laser-cut hardened and tempered steel plate is precision-balanced for accurate cuts producing tight joints. * Ultra-sharp cutting edges dramatically reduce splintering and tear-out. * Extra-hard carbide ensures that cutting edges stay sharp. * Laser-cut expansion slots minimize noise and edge vibration for excellent surface finish. * Woodworking Blade Re-sharpening Service re-sharpens blades to original factory specifications to extend the overall life of the blade.Specifications: * Diameter 10" * Teeth 60 * Arbor Size 5/8" * Hook Angle 12 * Kerf.125" * Plate Thickness.087" * Tooth Grind ATB * Max Speed 6000 rpmPackage Dimensions: * Length 11.810 in * Width 0.630 in * Height 11.810 in * Cube 0

more >>
Factory Authorized Outlet
$89.99 See It
DCS391B 20V MAX Li-Ion Circular Saw Kit (Bare Tool)

SPECIFICATIONS Voltage: 20V MAX No Load Speed 3700 rpm Blade Diameter 6-1/2" Bevel Capacity 50 Arbor Size 5/8" Depth of Cut at 45 1-5/8" Depth of Cut at 90 2-1/4" Battery Type: MAX * Li-ion Tool Weight 8.0 lbs INCLUDES One (1) DCS391 6-1/2" Circular Saw One (1) 6-1/2" Carbide-tipped Blade 6-1/2" Carbide Tipped Blade Included The DCS391B 20V MAX * Lithium Ion 6 1/2" Circular Saw Kit Features: Features the 20V MAX battery system which runs up to 57% faster and has up to 35% greater runtime Powerful 460 MWO, 3700 RPM motor delivers power and speed to make the most demanding cuts with ease High strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy Optimized rubber overmolded comfort grip delivers optimal balance and control 0-50 bevel capacity allows for aggressive bevel cuts for a multitude of applications 6-1/2"

more >>
Factory Authorized Outlet
$119.00 See It
DW713 10" (254m) Single Bevel Miter Saw

The DW713 Features: * 15 Amp, 5,000 rpm motor delivers extended power and durability * Stainless steel detent plate with 11 positive stops provides repeatable accuracy and jobsite duability * Tall sliding fences support crown molding vertically 4-1/2" and easily slides out of the way for bevel cuts * Machined base fence support maintains fence perpendicularity with blade for cutting accuracy * Cam miter lock for quick and accurate miter table positioning * Miter detent override for fine adjustment and precise miter angles * 0-50 left and right miter capacity for greater versatility * Bevels 3-48 for increased cut capacity * Lightweight (35lbs), built-in carrying handle for increased portability * Laser compatible, designed for use with the DWS7085 LED worklight or DW7187 DEWALT adjustable miter saw laser systemSpecifications: * Blade Diameter: 10" * Amps: 15Amps * No Load Speed: 5000rpm * Arbor Size: 5/8" * Vertical Capacity: Baseboard

more >>
Factory Authorized Outlet
$219.00 See It
DW3422 8" MASONRY ABRASIVE SAW BLADE (10 BLADES)

SPECIFICATIONS Max. RPM 7,600 Applications Cuts in Masonry Blade Diameter 8" Blade Thicknes 1/8" Round Arbor Size 5/8" DW3422 * Double-Reinforced for Increased Life and Durability * Industrial Grit to Provide Longer Life * Metal Arbor Prevents Blade from Shearing * Precision-Crafted and Manufactured to Provide Optimum Performance for Top Quality Results DeWalt 8" MASONRY ABRASIVE SAW BLADE (10 BLADES)

more >>
Factory Authorized Outlet
$38.45 See It
Search within results