1 to 20 of about 1501 products for screwdriver set

Result for "screwdriver set"
Stanley® 66-052, 6 Piece Precision Screwdriver Set

Stanley 66-052, 6 Piece Precision Screwdriver Set Swivel-head handles provide precision and reach. Tough, plastic handles with soft cushion grip for comfort. Finish on bars for corrosion resistance. Plastic storage case included.INCLUDES:1.4, 2.0, 2.4, 3.0 mm Standard Slotted; #0, #1 Phillips 7.70 L. 3.90 W. 0.90 H.

more >>
Global Industrial
$6.10 See It
Psd™ Precision Torx Screwdriver Sets, Eklind Tool 92200

10PC TORX T3-T20 SCREWDRIVER SET Spinner-cap for precise controlPrecision machined tipSizes marked permanently on capOil and chemical resistant 13.06 L. 3.00 W. 1.75 H.

more >>
Global Industrial
$25.95 See It
General Tools 80075 9 Pc. Ratchet Offset Screwdriver Set

General Tools 80075 9 Pc. Ratchet Offset Screwdriver Set A Ratchet Screwdriver gives you a greater amount of torque than a standard screwdriver, and is perfect for reaching screws in obstructed areas. The fine-tooth ratchet creates a swing radius of only five degrees, therefore facilitating fastener removal and installation in the tightest of spaces. In addition, the offset handle allows for easier access to screws positioned at odd angles. This nine piece set includes our most common bits for routine maintenance needs. The Ratchet Offset Screwdriver is used for reaching concealedor obstructed screws, and is helpful in situations where leverage is required. The Ratchet drive handle reverses instantly for clockwise andcounter-clockwise rotation. Permits short radius movements where turning space is limited 72 tooth ultra-fine ratchet requires only 5 turning radius. The Chrome Vanadium Steel ratcheting handle is ergonomically designed which allows for greater control, comfort and torque. Includes: 1/4" and 3/16" Slotted bits No. 1 and No. 2 Phillips bits T15 and T20 Torx 1/8" and 5/32" Hex 9.00 L. 5.00 W. 0.50 H.

more >>
Global Industrial
$8.95 See It
 Duratek J1209st 9-Piece Torx® Screwdriver Set

Proto DuraTek J1209ST 9-Piece Torx Screwdriver Set Features: 3 Step High Polish Finish w/ Vapor Bladed Tip - Provides extra protection against corrosionPrecision Grip Zone - Provides additional comfort and control for fine torque applications360 Degree Chemical Resistant Textured Grip - Provides maximum comfort and gripHigh Torque Zone - Provides increased ergonomic benefit for high torque applicationsSpeed Zone - Grip design provides increased speed and controlQuad-Lobular - Provides superior handle ergonomicsMolded Tip ID and Brand - Easily identify the type of tipIncludes: JT8314R - T8 x 3-1/4" Torx ScrewdriverJT10314R - T10 x 3-1/4" Torx ScrewdriverJT15314R - T15 x 3-1/4" Torx ScrewdriverJT20314R - T20 x 3-1/4" Torx ScrewdriverJT25314R - T25 x 3-1/4" Torx ScrewdriverJT2704R - T27 x 3-1/4" Torx ScrewdriverJT3004R - T30 x 3-1/4" Torx ScrewdriverJT4006R - T40 x 3-1/4" Torx ScrewdriverJT4506R - T45 x 3-1/4" Torx Screwdriver 10.50 L. 4.50 W. 2.10 H.

more >>
Global Industrial
$104.95 See It
Stanley® 66-358, 7 Piece Stubby Multi-Bit Ratcheting Screwdriver Set

Stanley 66-358, 7 Piece Stubby Multi-Bit Ratcheting Screwdriver Set Magnetic bit holder for speedy and secure changeover of bits. Durable bi-material handles with comfort grip. Includes (6) chrome vanadium (CrV) bits with internal bit storage for easy access to bits - end cap carries 6 bits. Three-position switch enables clockwise and counter-clockwise ratcheting and locked positions.INCLUDES:(1) 4-1/2 in (114 mm) Ratcheting Screwdriver; (3) 1/8, 3/16, 1/4 in Standard Slotted Screwdriver Bits; (3) (1) #1, (2) #2 Phillips Screwdriver Bits 7.50 L. 4.00 W. 1.50 H.

more >>
Global Industrial
$8.30 See It
5 pc. Screwdriver Set, Precision

Up to 25% OFF Craftsman Tools

Craftsman s Precision Screwdriver Set Gives You Five of the Most Popular Phillips And Slotted-BladesThis 5-pc. precision screwdriver set pairs great with computers and laptops but comes in handy in a number of household tasks, too. The set includes

more >>
Sears
$6.99 See It
Stanley® 60-100, 10 Piece Standard Fluted Screwdriver Set

Stanley 60-100, 10 Piece Standard Fluted Screwdriver Set Features: Ergonomic, quad-lobular (four-sided) handles with slip-resistant, textured grip for comfort and extra torque. Color-coded handles for easy tip identification. Phillips tips - cold formed for more consistent dimensions. Square tips - cold formed tapered tip allowing interference with screw for a one-handed operation. All square tips will be black oxide for precision and better screw fit. Heat-treated alloy steel bars hold up to repeated use. Nickel-plated bars for corrosion resistance. Sets feature popular sizes to satisfy wide range of fastening needs. Storage rack included. INCLUDES: Standard Flutted Phillips # 1" x 4" Standard Flutted Phillips # 2" x 4" Standard Flutted Cabinet Slotted 3/16" x 3" Standard Flutted Slotted 1/4" X 4" Standard Flutted Cabinet Slotted 3/16" x 6" Standard Flutted Slotted 1/4" x 6" 12.20 L. 10.60 W. 1.20 H.

more >>
Global Industrial
$12.25 See It
Offset Ratchet Screwdriver Set

Up to 25% OFF Craftsman Tools

Craftsman Ratchet Screwdriver Gets Where Others Can'tWhether you're installing speakers, working with mechanical devices or installing a door handle, this Craftsman offset ratchet screwdriver set is a useful and versatile tool kit staple that you'll

more >>
Sears
$6.99 See It
Stanley® 66-708, 8 Piece Vinyl Grip Screwdriver Set

Stanley 66-708, 8 Piece Vinyl Grip Screwdriver Set Vinyl grip handle provides extra torque capability, greater comfort, and a slip resistant grip. Acetate handle built for strength. Flanges on the blade inside the handle provide a solid, twist-resistant blade. Black oxide tips for use in electrical applications. Bars are fully ground and polished, then chrome plated for corrosion resistance. Bars are made of alloy steel and heat-treated for strength and durability. 18.70 L. 4.50 W. 3.50 H.

more >>
Global Industrial
$43.95 See It
37 pc. Screwdriver Bit Set with Case -5%

Up to 25% OFF Craftsman Tools

37-Piece Screwdriver Bit Set in Case, Engineered for High-Speed UseThe DeWalt 37-piece screwdriver bit set with case is a professional-quality screw driving set that gets you from job to job quickly. It includes 34 steel bits and three drivers

more >>
Sears
$20.99 $19.94 See It
Stanley® 66-565 6 Piece Vinyl Grip Diy Screwdriver Set

Stanley 66-565 6 Piece Vinyl Grip DIY Screwdriver Set Features: Vinyl grip handle provides extra torque capability, greater comfort, and a slip resistant gripAcetate handle built for strengthFlanges on the blade inside the handle provide a solid, twist-resistant bladeBlack oxide tips for use in electrical applicationsBars are fully ground and polished, then chrome plated for corrosion resistanceBars are made of alloy steel and heat-treated for strength and durabilityNickel-plated barsIncludes: 3/16 x 3 in, 3/16 x 6 in Cabinet Slotted Tip1/4 x 4 in, 5/16 x 6 in Standard Slotted Tip#1 x 3 in, #2 x 4 in Phillips Tip 13.20 L. 9.50 W. 1.50 H.

more >>
Global Industrial
$19.00 See It
6 Piece Slotted, Pozidriv® & Cabinet Tip Screwdriver Set, E160903

Expert 6 Piece Slotted, PoziDriv & Cabinet Tip Screwdriver Set, E160903 Includes: Cabinet: 3/32", 1/4" Slotted: 5/16", 3/8" PoziDriv : #1, #2 13.00 L. 6.40 W. 1.80 H.

more >>
Global Industrial
$32.95 See It
18 pc. Screwdriver Set -20%

Up to 25% OFF Craftsman Tools

18 pc. multi-blade, interchangeable screwdriver set with a zippered portfolio case. Includes multi-blade, interchangeable, cushioned handle with twist chuck; awl scriber; slotted blades: 3/64, 1/16, 5/64 and 3/32 in; Phillips blades: #000, #00; Torx

more >>
Sears
$19.99 $16.00 See It
Greenlee® 0153-02c 7 Piece Screwdriver Set

Greenlee 0153-02C 7 Piece Screwdriver Set Features: Heavy-Duty Construction ForLonger LifeHandle Marked For Easy Identification Of Screwdriver Size, Type And LengthPrecision-Machined Tips For Accurate Fastener ContactStrong, Durable Black Phosphate Tips Prevent Chipping Of PlatingHigh-Grade, Rust Resistant, Chrome-Plated FinishSoft, Cushioned Grip For Extra Comfort And TorqueExceeds ASME/ANSI SpecificationsLifetime Limited WarrantyNote: This is not an insulated tool 15.63 L. 6.75 W. 1.38 H.

more >>
Global Industrial
$47.95 See It
5 pc. Insulated Screwdriver Set

Up to 25% OFF Craftsman Tools

5 pc. Insulated screwdriver set includes 3, 4 and 5-in. flat tips; 3-in. phillips #1 and 4-in. phillips #2 screwdrivers. Meets ASTM F1505-01/IEC 900 standards for insulated tools including individual testing up to 1,000 volts.

more >>
Sears
$45.99 See It
10 Piece Screwdriver Set

SCREWDRIVER SETS Global Industrial 10 Piece Screwdriver Set Global Industrial 10 Piece Screwdriver Set provides valuable tools at an affordable price. Set includes ten screwdrivers in various sizes and lengths, with 6 flathead and 4 Phillips head tips. Round shanks are made using chrome-plated steel, and a cushion grip ensures comfort during long periods of use. Screwdrivers come with phosphate-plated magnetic black tips. Includes: (1) 3/16" Standard Flathead Screwdriver(1) 3/16" Long Flathead Screwdriver(1) 1/4" Standard Flathead Screwdriver(1) 1/4" Stubby Flathead Screwdriver(1) 5/16" Standard Flathead Screwdriver(1) 3/8" Standard Flathead Screwdriver(1) #1 Standard Philips Screwdriver(1) #2 Standard Philips Screwdriver(1) #2 Stubby Philips Screwdriver(1) #3 Standard Philips Screwdriver 14.00 L. 9.00 W. 1.50 H.

more >>
Global Industrial
$50.95 See It
General Tools 8075 Standard 5 Piece Ratchet Screwdriver Set

Standard 5 Piece Ratchet Screwdriver Set An Offset Ratchet Screwdriver is a useful tool to have on hand as it provides greater leverage compared to a traditional screwdriver. This type of tool is also a far superior alternative to Allen Keys when working with hex screws. The swift ratcheting motion allows you to remove and install screws with ease, and the offset head provides odd-angle access in obstructed areas. This five piece set includes Phillips and Slotted bits. A great alternative to traditional screwdrivers and Allen KeysOffset head for odd-angle accessIncludes four bits: #1 and #2 Phillips, 1/4" and 3/8" SlottedAccepts industry standard insert bitsRatchet handle is reversible on-the-flyCommonly used in firearm and camera repair workProvides greater amount of leverage than regular screwdriverRatcheting motion allows swift installation and removal of screwsMade from hardened, tempered steel with nickel platingBlack oxide bits resist corrosion 6.75 L. 3.25 W. 2.13 H.

more >>
Global Industrial
$5.95 See It
Stanley® 54-925, 29 Piece Multi-Bit Ratcheting Screwdriver Set

Stanley 54-925, 29 Piece Multi-Bit Ratcheting Screwdriver Set Three-position switch enables clockwise and counter-clockwise ratcheting and locked position. Ergonomically designed bi-material handle. Nickel-plated bar for corrosion resistance.INCLUDES:(1) Ratcheting Screwdriver; (3) (2) 1/4, (1) 9/32 in Standard Bits; (5) (2) #1, (2) #2, (1) #3 Phillips Bit; (5) T10, T15, T20, T25, T27 Torx Bit; (2) 1/8, 5/32 in Hex Bits; (1) Adapter; (6) 1/4 Drive 5, 6, 7, 8, 9, 10 mm Sockets; (6) 1/4 Drive 1/4, 5/16, 11/32, 3/8, 7/16, 1/2 in Sockets 10.70 L. 6.60 W. 1.40 H.

more >>
Global Industrial
$13.50 See It
11779 7.2-volt Ni-Cd Cordless Screwdriver with Bit Set

Up to 25% OFF Craftsman Tools

Count on this NiCad Cordless Screwdriver to Lend a Hand A handy tool to have around the house and on the road, this Craftsman 11779 7.2 volt NiCad cordless screwdriver twists and turns on command, propelling screws, nuts and bolts with the press of

more >>
Sears
$34.99 See It
Stanley® 66-158, 100 Plus® 8 Piece Screwdriver Set

Stanley 66-158, 100 Plus 8 Piece Screwdriver Set Large, deep fluted acetate handle stands up to heavy-duty industrial use. Easy-to-clean handle. Flanges on the blade inside the handle provides a solid, twist-resistant blade. Bars are fully ground and polished, then chrome plated for corrosion resistance. Bars are made of alloy steel and heat-treated for strength and durability.INCLUDES:Slotted 1/4 x 1-1/2", 1/4 x 4", 5/16 x 6", 3/8 x 8", Phillips #2 x 1-1/2", #1 x 3", #2 x 4, #3 x 6 18.70 L. 4.50 W. 3.70 H.

more >>
Global Industrial
$39.95 See It
Search within results