1 to 20 of  100 products for skil 3700dp drill press insert plate for xbench workstation

No exact matches found for skil 3700dp drill press insert plate for xbench workstation

100 similar items found

DNMG 433 HR PH5125 Toolmex inserts, 112-1506-L8 (10 pcs)

DNMG 150412 HR PH5125, 55-deg. Diamond Negative Turning Insert for Heavy Roughing Of Steel and Steel Castings at Low Cutting Speeds (CVD Coated), 10/pack, Toolmex Palbit

more >>
cetoolsupply.com
$102.00 See It
ANHX 100405 PNR-LP PH6930 Toolmex inserts, 111-1652-66 (10 pcs)

ANHX 100405 PNR-LP PH6930, 85 Degree Parallelogram Milling Insert for Medium to Rough Cutting on Steel and Stainless Steel (PVD) Coated, 10/pack, Toolmex Palbit

more >>
cetoolsupply.com
$158.33 See It
R390-17 04 08M-PM 4240 Sandvik Carbide Inserts (10 PCS)

Sandvik CoromantR390-17 04 08M-PM 4240 Carbide InsertsTechnical Specs Item: Carbide Milling InsertsLead Angle: 90 DegreesInsert Shape: RectangleStyle: R390Chip-Breaker: PMGrade: 4240Inscribed Circle: 0.378"Insert Thickness: 0.187"No. of Edges: 2Mounting Hole Diameter: 0.161"Nose Radius: 0.032"Coating: MTCVD Coated CarbideRake: PositiveCutting Direction: Right HandMounting Style: Screw ClampWorkpiece Material: SteelANSI Number: R390-17 04 08M-PM 4240ISO Number: R390-17 04 08M-PM 4240Application: Medium

more >>
cetoolsupply.com
$139.99 See It
WCMX 06 T3 08 R-53 1020 Sandvik Carbide Inserts (10 PCS)

Sandvik CoromantWCMX 06 T3 08 R-53 1020 Carbide Drilling Inserts Technical Specs Item: Carbide Drilling InsertStyle: Coromant UANSI Number: WCMX 06 T3 08 R-53 1020Insert Position: OutboardApplication: General PurposeChip-Breaker: 53Workpiece Material: All MaterialsGrade: 1020Insert Shape: Trigon 80 DegreesInsert Size: WCMX 06 T3Nose Radius: 0.031"Cutting Direction: Right HandNo. of Edges: 3Inscribed Circle: 0.375"Insert Thickness: 0.156"Coating: PVDMounting Hole Dia.: 0.146"Mounting Style: Screw ClampRake: PositiveANSI Number: WCMX 06 T3 08 R-53 1020ISO Number: WCMX 06 T3 08 R-53 1020

more >>
cetoolsupply.com
$110.50 See It
R390-18 06 08M-KM 3040 Sandvik Carbide Inserts (10 PCS)

SANDVIKR390-180612M-KM 3040 Carbide InsertsItem: Carbide Milling InsertLead Angle: 90 DegreesInsert Shape: RectangleStyle: R390Chip-Breaker: KMGrade: 3040Inscribed Circle: 0.433"Insert Thickness: 0.249"No. of Edges: 2Mounting Hole Dia.: 0.163"Nose Radius: 0.047"Coating: MTCVD Coated CarbideRake: PositiveCutting Direction: Right HandMounting Style: Screw ClampWorkpiece Material: Cast IronANSI Number: R390-18 06 12M-KM 3040ISO Number: R390-18 06 12M-KM 3040Application: Medium

more >>
cetoolsupply.com
$133.20 See It
R390-17 04 08M-PM 1030 Sandvik Carbide Inserts (10 PCS)

Sandvik Coromant R390-17 04 08M-PM 1030 CoroMill 390 insert for milling

cetoolsupply.com
$119.99 See It
R245 12 T3M-PM 4230 Sandvik Carbide Inserts (10 PCS)

SANDVIK / COROMANTR245-12-T3M-PM 4230 CARBIDE INSERTS Carbide Milling Inserts Lead Angle:  45 Degrees Insert Shape:  Square Style:  R245 Chip-Breaker:  PM Grade:  4230 Inscribed Circle:  0.528" Insert Thickness:  0.156" No. of Edges:  4 Mounting Hole Diameter:  0.161" Coating: MTCVD Coated Carbide Rake:  Positive Cutting Direction:  Right Hand Mounting Style: Screw Clamp Workpiece Material: Steel ANSI Number:  R245-12 T3 M-PM 4230 ISO Number:  R245-12 T3 M-PM 4230 Application:  Medium For Use With:  RA245-127R38-12H,RA245-127R38-12L,RA245-127R38-12M,RA24 PKG QTY: 10 PCS

more >>
cetoolsupply.com
$129.99 See It
R390-18 06 16M-PM 4230 Sandvik Carbide Inserts (10 PCS)

SANDVIKR390-180616M-PM 4230 Carbide Milling InsertsLead Angle: 90 Degrees Insert Shape: Rectangle Style: R390 Chip-Breaker: PM Grade: 4230 Insert seat size code:  18  Operation type:  Medium  Corner radius:  1.6 mm  Wiper edge length:  1.1 mm  Insert thickness:  6.33 mm  Insert width:  11 mm  Depth of cut maximum:  16 mm  Coating: MTCVD Coated Carbide Cutting Direction: Right Hand Mounting Style: Screw Clamp Workpiece Material: Steel ANSI Number: R390-18 06 16M-PM 4230 ISO Number:  R390-18 06 16M-PM 4230 Application: Medium PKG QTY: 10 PCS  

more >>
cetoolsupply.com
$129.99 See It
CNMG 644-PM 4225 Sandvik Carbide Inserts (10 PCS)

 Sandvik CoromantCNMG 644-PM 4225 Carbide InsertsT-Max® P carbide inserts for turning    Technical Specs Isert seat size: 19  Insert seat size:  3/4  Application: Medium  Cutting edge length:  19.3439 mm  Insert thickness:  6.35 mm  Inscribed circle diameter:  19.05 mm   HAND: N  Style: CNMG-PM  GRADE: 4225  COATING:  MTCVD  ISO:  CNMG 19 06 16-PM 4225  ANSI:  CNMG 644-PM 4225    

more >>
cetoolsupply.com
$109.90 See It
RC-2249 CNC Insert Mini Surfacing & Rabbeting Flycutter 2+2 Flute Design 1-1/2 Dia x 1/2 Cut Height x 1/4 Inch Shank Router Bit

Mini Insert Spoilboard Surfacing, Rabbeting, Flycutter and Bed Skimming CNC Router Bit with Scorers, 2 + 2 Design

more >>
toolstoday.com
$175.82 See It
RCKT 130400-PM 4240 Sandvik Carbide Inserts (10 PCS)

Sandvik CoromantRCKT 13 04 00-PM 4240 Carbide Inserts SpecsItem: Carbide Milling InsertsLead Angle: 7 DegreesInsert Shape: RoundStyle: RCKTChip-Breaker: PMGrade: 4240Inscribed Circle: 0.500"Insert Thickness: 0.188"No. of Edges: 8Mounting Hole Diameter: 0.173"Nose Radius: 0.250"Coating: MTCVD Coated CarbideRake: PositiveCutting Direction: NeutralMounting Style: Screw ClampWorkpiece Material: SteelANSI Number: RCKT 13 04 00-PM 4240ISO Number: RCKT 13 04 00-PM 4240Application: Medium

more >>
cetoolsupply.com
$129.00 See It
DNMG 443-QM S05F Sandvik Carbide Inserts (10pcs)

Sandvik Coromant Carbide Turning Insert DNMG 443-QM S05F (10pcs)

cetoolsupply.com
$121.80 See It
61350 Insert Carbide Adjustable Groove & Rabbet w/Scorer 160mm Dia x 4.0 to 7.5mm Cut Height x 1-1/4 Bore Shaper Cutter
toolstoday.com
$295.70 See It
VNMG 332-QM S05F Sandvik Carbide Inserts (10 PCS)

SANDVIK COROMANTVNMG 332-QM S05F CARBIDE INSERTS Item: Carbide Turning InsertsRelief Angle: Zero Degree, Double SidedInsert Shape: 35 Degrees DiamondStyle: VNMGInsert Size: 332Chip-Breaker: QMGrade: S05FInscribed Circle: 3/8"Insert Thickness: 0.1875"Nose Radius: 0.0315"Cutting Direction: NeutralMounting Hole Dia.: 0.15"Number of Edges: 4 Mounting Style: Top and Hole ClampingGrade: S05F (S05)S05F has a thin 4 μm CVD TiCN- Al2O3-TiN coating on top of a very hard and fine-grain substrate. This grade is optimized forfinishing cuts in HRSA. To be used in conditions where notch is not a significant problem, i.e. shallow depths of cuts, round inserts, small entry angle and softermaterials. ISO Number: VNMG 16 04 08-QM S05FANSI Number: VNMG 332-QM S05F

more >>
cetoolsupply.com
$163.20 See It
Power Tools Storm Door and Window Threshold Insert Gray T 8707

Free Shipping on Over 500K Items!

Shop for Tools & Hardware at The Home Depot. This threshold insert is constructed from extruded gray vinyl. It features a length of 37 in. that can be cut down to any size. This style threshold fits on M&D and other aluminum threshold bases. Color

more >>
Home Depot
$4.29 See It
#2 Phillips Insert Bit Tip -27%

On sale: 27% off

#2 Phillips Insert Bit Tip

Sears
$10.99 $7.99 See It
Search within results
  • Find by Price
    • $ to $