1 to 20 of  36 products for sling swivel mount

Result for "sling swivel mount"
Ar-15/M16 Ubr Quick-Detach Sling Swivel Mounts Type 2 Kit - Type 2 Qd Sling Mount

Heavy-duty steel receptacle supplements the two mounts that come with the stock to give your UBR stock maximum versatility in ambidextrous, quick-detach, pushbutton sling mounting. Bolts to any of the stock's four mounting points and accepts most pushbutton, single-point sling swivels. Allows full 360° rotation of swivel for unrestricted sling travel. While both the UBR and STR come with reversible push-button QD swivel sockets pre-installed on the left side of the stock (UBR comes with two, one front and rear), the UBR/STR QD Swivel Sling Mount can be installed on the opposite side to add additional push-button sling swivels. Heavy-duty black phosphatized steel construction eas Mfg: Magpul SPECS: Steel, phosphate finish, matte black. ¾" (1.9cm) long. .

more >>
Brownells
$18.99 See It
Ar-15/M16 End Plate Sling Mounts - M4 Oem Sling Mount, Black

Replaces factory receiver end plate and provides secure, ambidextrous attachment for the push-button QD sling swivel. Made of hardened aluminum with extra metal at the stress points to ensure this mount won't fail during hard use. Rounded edges resist snagging on sling or other gear. Hardcoat anodized for extra strength and wear resistance, with a matte black finish that matches most factory buffer tubes. Heavy-duty stainless steel swivel accepts slings up to 1¼" wide and allows a full 360° of rotation. Mfg: Troy Industries, Inc. SPECS: Mount - Aluminum, hardcoat anodized, matte black. Swivel - Stainless steel, matte black finish. Accepts slings up to 1¼" (3.2cm) wide. M4 fits M4-style carbines with adjustable buttstock.

more >>
Brownells
$44.99 See It
Ar-15/M16 Rail Mount Qd Sling Swivel - Qd Rail Mount Swivel

Uniquely designed, quick-detach swivel mount limits rotational movement to help achieve optimum weapon balance and control with popular tactical slings. Attach anywhere along railed forearms; robust, aluminum clamping block with hex head cross-bolt locks mount securely to any Picatinny or Weaver-style rail platform. Extra heavy-duty, steel, push-button swivel removes quickly, so operator can break-away from the sling in emergency situations. Can be mounted for right- or left-hand use and adapts to 2- and 3-point sling configurations. Swivel rotation is limited to approximately 45° to help stabilize the weapon and eliminate sling tangle. Mfg: Daniel Defense SPECS: 6061 T6 aluminum, Mil-Spec Type III, hardcoat anodized, black. 1¼ (3.2cm) long, 1" (2.5cm) wide, 5/8" (1.6cm) high, 1 oz. (28g) wt.

more >>
Brownells
$39.99 See It
Ar-15/M16 Clamp-On Sling Mount - Qd Sling Mount, Black

Low-profile sling mount attaches to any Picatinny handguard rail to provide a variety of forward mounting options for two- and three-point slings. Machined from solid aluminum billet for superb strength, with a locking bar and hex head steel bolt that clamp solidly to the rail. Smooth, snag-free shape is designed to fit flush with Tango Down rail panels. Quick-Detach accepts standard push-button quick-detach sling swivels; designed to prevent swivel rotation and unwanted sling twist. Available alone or with a heavy-duty Gear Sector steel sling swivel included. Mfg: Gear Sector SPECS: 6061 T6 aluminum, MIL-A-8625F Type III, Class II hardcoat anodized, Matte Black. Quick Detach - 1" (2.5cm) long, 17/16" (3.7cm) wide, ¾" (2cm) high. Accepts 1" wide slings.

more >>
Brownells
$39.99 See It
Ar-15/M16 Front Sling Adapters - Mctar-08 Swivel Mount Adapter

Two-piece clamp with single cross-bolt secures adapter to Picatinny/Weaver-style handguard rails so you have a front sling attachment point. MCTAR-06 has pivoting, 1¼" wide swivel for direct sling attachment. Rubber coating on swivel prevents noisy, metal-to-metal contact. MCTAR-07 includes a fixed, dome-shaped stud that accepts your own, standard quick-detach swivel. MCTAR-08 includes a 11/4" wide, 360º rotating, push-button swivel for rapid sling removal. MCTAR-08HD has heavy duty base and swivel that stands up to extreme tactical operations. 1¼" wide, quick-detach swivel limits travel to prevent sling wrapping yet allows necessary movement. MCTAR-08 Mfg: Midwest Industries, Inc. SPECS: Bases - 6061 aluminum, mil-spec hardcoat anodized, matte black; steel setscrew, matte black oxide. MCTAR-08HD - 7/8" (2.2cm) long x 13/16" (3cm) wide. MCTAR-08HDO - 2" (5cm) long x 1" (2.5cm) wide. Other models - 9/16" (1.4cm) long x 13/16&quo

more >>
Brownells
$34.99 See It
Ar-15/M16 Front Sling Adapters - Mctar-06 Swivel Mount Adapter

Two-piece clamp with single cross-bolt secures adapter to Picatinny/Weaver-style handguard rails so you have a front sling attachment point. MCTAR-06 has pivoting, 1¼" wide swivel for direct sling attachment. Rubber coating on swivel prevents noisy, metal-to-metal contact. MCTAR-07 includes a fixed, dome-shaped stud that accepts your own, standard quick-detach swivel. MCTAR-08 includes a 11/4" wide, 360º rotating, push-button swivel for rapid sling removal. MCTAR-08HD has heavy duty base and swivel that stands up to extreme tactical operations. 1¼" wide, quick-detach swivel limits travel to prevent sling wrapping yet allows necessary movement. MCTAR-08 Mfg: Midwest Industries, Inc. SPECS: Bases - 6061 aluminum, mil-spec hardcoat anodized, matte black; steel setscrew, matte black oxide. MCTAR-08HD - 7/8" (2.2cm) long x 13/16" (3cm) wide. MCTAR-08HDO - 2" (5cm) long x 1" (2.5cm) wide. Other models - 9/16" (1.4cm) long x 13/16&quo

more >>
Brownells
$31.99 See It
Ar-15/M16 Quick Detach Sling Swivel - Qd Receiver End Plate

Low-profile ambidextrous mount replaces the factory receiver end plate to allow easy attachment of a QD sling swivel to the rear of the receiver. Won't interfere with access to weapon's controls, and won't snag on foliage, vehicle, or other gear. Made of steel to allow proper staking of buffer tube lock nut on the lower receiver. Compatible with mil-spec lower receivers with M4-style collapsible stocks. Lets collapsible stocks collapse fully. Mfg: Noveske Rifleworks Llc SPECS: Steel, Parkerized, dark gray finish. Fits AR-15/M16with M4-type collapsible stock.

more >>
Brownells
$26.99 See It
Ar-15/M16 Sling Mount Kit - Type 1 - Magpul Sling Mount Kit - Type 1

Steel sling swivel mount allows slings equipped with pushbutton QD swivels to attach to the Magpul MOE Rifle and Fixed Carbine (FCS) buttstocks as well as SGA Shotgun Stock. Easy-to-install because it fastens securely to mounting points already molded into both sides of the stock. Use with the Type 2 kit for Ambidextrous sling mounts on the MOE Rifle or FCS stocks. Mfg: Magpul SPECS: Heavy-duty phosphate steel, black. Fits Magpul MOE Rifle and Fixed Carbine (FCS) butttocks and SGA shotgun stock. Mounting hardware included. Swivels not included.

more >>
Brownells
$14.99 See It
Micro Flush Qd Sling Mount

Features & Benefits: Accepts any push-button Quick Detach sling swivel 8 position rotation limited to prevent sling wrap-up 95% lower profile than a separate Sling Mount and Picatinny Mil-Spec 1913 Rail Section, the ergonomic, flush mount design eliminates all sharp edges that can ensnarl the operator's gear Designed to fit precisely through any vent hole in the Troy Industries TRX Extreme and Alpha Battle Rails with no modifications Can be mounted through a single ½" diameter hole in most polymer stocks, handguards, forends, and buttstocks measuring up to .230" in thickness, including M.O.E. Handguards by Magpul Industries. Mfg: Impact Weapons Components SPECS: CNC Machined from Billet 303 Stainless Steel. Weighs: .243 oz.

more >>
Brownells
$15.99 See It
Ar-15/M16 Sling Mount Kit - Type 1 - Magpul Sling Mount Kit - Type 1

Steel sling swivel mount allows slings equipped with pushbutton QD swivels to attach to the Magpul MOE Rifle and Fixed Carbine (FCS) buttstocks as well as SGA Shotgun Stock. Easy-to-install because it fastens securely to mounting points already molded into both sides of the stock. Use with the Type 2 kit for Ambidextrous sling mounts on the MOE Rifle or FCS stocks. Mfg: Magpul SPECS: Heavy-duty phosphate steel, black. Fits Magpul MOE Rifle and Fixed Carbine (FCS) butttocks and SGA shotgun stock. Mounting hardware included. Swivels not included.

more >>
Brownells
$14.99 See It
Keymod Quick Detachable Sling Mount - Ar-15/M16 Keymod Sling Mount

Low-profile, all-steel, detachable sling mount is designed for use with standard KeyMod mounting holes and rails. Bearing cups are cut near the bottom edge of the mount, letting the swivel set as deeply as possible through the KeyMod holes. Streamlined mount helps increase mobility while decreasing the "snag" factor. Mount accepts standard push button QD sling swivels. Requires three KeyMod attachment hole mounting points. Includes Torx wrench for installation. Mfg: Bravo Company SPECS: Hardened steel, matte black. 1.25" (3.2cm) long, 0.6" (1.6cm) wide. 0.3 oz. (8.5g) wt.

more >>
Brownells
$17.99 See It
Bipod/Sling Stud For Customizable Tube - Bipod/Sling Stud

Steel Bipod/Sling Stud screws directly into underside of handguard to provide a rock-solid mounting point for a Harris-style bipod. Also serves as an ultra-secure, heavy-duty sling swivel mount. Mfg: Yankee Hill Machine Co., Inc. SPECS: 12L14 steel, black. Approximately 5/8" (15mm) OAL, threaded portion ¼" (6mm) long. 10-32 thread. Fits Yankee Hill Customizable series free-float handguards only.

more >>
Brownells
$1.99 See It
Ar-15/M16 Professional-Grade Sling Adapter - Pro-Grade Sling Adapter, Black

Heavy-duty sling adapter slides over collapsible stock buffer tubes to provide secure, ambidextrous attachment for the push-button QD sling swivel. No gunsmithing required-simply tighten down the steel crossbolt with the included hex key wrench. Solid aluminum construction with plenty of extra metal at the stress points to ensure this mount won't twist, flex, or bend under pressure. Beveled and rounded edges help resist snagging on sling or other gear. Indexes to upper receiver to prevent unwanted rotation of buffer tube. Hardcoat anodized for extra strength and wear resistance; available in matte black or dark earth. Stainless steel swivel has a non-reflective black finish an Mfg: Troy Industries, Inc. SPECS: Aluminum, hardcoat anodize, matte black or dark earth, with stainless steel sling swivel, matte black finish. Accepts slings up to 1¼" (3.2cm) wide.

more >>
Brownells
$48.99 See It
Ar-15/M16 Rail Sling Adapter - Rail Sling Adapter

Solid, one-piece aluminum mount with steel, pivot pin and swivel attaches to any Picatinny or Weaver-style accessory rail for instant sling attachment. Nylon tip set screw locks mount to rail. Quiet, rubber-coated swivel prevents metal-to-metal slap and eliminates sling wear at point of contact. Accepts slings up to 1¼'''' wide. Mfg: Ergo Grips SPECS: Base - Aluminum. Swivel/Hardware - Steel. Matte black finish. 9/16'''' (1.4cm) long, 1¼'''' (3.2cm) wide, 1-5/8'''' (4.1cm) high. Fits slings up to 1¼'''' wide.

more >>
Brownells
$23.00 See It
Tactical Swivel Mounts - Threaded Swivel Stud

Steel, swivel stud features a full, 360 degrees of rotation to allow your tactical sling to follow the movements of your body, not just the rifle. Virtually eliminates sling tangle. Accepts standard, quick-detach type swivels. Threaded Swivel Stud is a 5/16''''-32 tpi pivoting stud. Fits Yankee Hill drilled and tapped handguards. Add-on to other applications with at least 1/4'''' depth clearance. Dovetail Sling Mount - Threaded Swivel Stud (above), combined with an aluminum dovetail clamp and steel cross-bolt. Secures directly to any Picatinny or Weaver-style rail. Mfg: Yankee Hill Machine Co., Inc. SPECS: Threaded Swivel Stud - Steel, blued finish. 5/16''''-32 tpi. Approx. ¾'''' (1.9cm) OAL, requires ¼'''' (6.4mm) depth clearance for drill/tap applications. Dovetail Sling Mount - Steel stud, blued; aluminum clamp, matte black mil-spec hardcoat finish. Approx. 1¼'''' (3.2cm) wide x 1¼'''' high.

more >>
Brownells
$5.10 See It
Ar-15/M16 Acs Swivel Mount Type 3 Kit - Sing Mount Kit Type 3

While the ACS and ACS-L now come standard with the Sling Mount Kit - Type 3, it can be added to either the right or left side of older models for use with push-button QD sling swivels. Heavy-duty steel receptacle gives your ACS stock the versatility of quick-detach, pushbutton sling mounting. Bolts to attachment points molded into the right and left sides of the stock behind the release lever using the included hardware. No drilling or other stock modifications required. Accepts most pushbutton, single-point sling swivels. Swivel rotation may be restricted when the stock's battery storage compartments are also installed. Mfg: Magpul SPECS: Steel, phosphate finish, matte black. ¾" (1.9cm) long. Includes mounting hardware and instructions.

more >>
Brownells
$14.99 See It
Uncle Mike's Qd 100 Sling Swivel - 1011-2 W/1'''' Loops See Specs #10 For Models

Quickly attaches or detaches with recessed push button. Provides secure sling attachment that cant come loose. Mounting system will fit nearly every centerfire or rimfire bolt action made, plus many other action types. When detached, leaves a non-snag, flush base. Use Epoxy to hold base in stock, no screw required. Set includes two bases and two loops. Mfg: Uncle Mikes SPECS: Steel, blued. 1'''' (2.5cm) swivels. Requires 5/8'''' (16mm) thick forend wood to mount. Includes instructions.

more >>
Brownells
$16.99 See It
Uncle Mike's Qd 100 Sling Swivel - 1'''' Qd-100 Loops Only, 2-Pak

Quickly attaches or detaches with recessed push button. Provides secure sling attachment that cant come loose. Mounting system will fit nearly every centerfire or rimfire bolt action made, plus many other action types. When detached, leaves a non-snag, flush base. Use Epoxy to hold base in stock, no screw required. Set includes two bases and two loops. Mfg: Uncle Mikes SPECS: Steel, blued. 1'''' (2.5cm) swivels. Requires 5/8'''' (16mm) thick forend wood to mount. Includes instructions.

more >>
Brownells
$14.99 See It
Uncle Mike's Qd 100 Sling Swivel - 1'''' Qd-100 Bases Only, 10-Pak

Quickly attaches or detaches with recessed push button. Provides secure sling attachment that cant come loose. Mounting system will fit nearly every centerfire or rimfire bolt action made, plus many other action types. When detached, leaves a non-snag, flush base. Use Epoxy to hold base in stock, no screw required. Set includes two bases and two loops. Mfg: Uncle Mikes SPECS: Steel, blued. 1'''' (2.5cm) swivels. Requires 5/8'''' (16mm) thick forend wood to mount. Includes instructions.

more >>
Brownells
$14.99 See It
Ar-15/M16 Front Sling Adapters - Mctar-07 Stud Mount Adapter

Two-piece clamp with single cross-bolt secures adapter to Picatinny/Weaver-style handguard rails so you have a front sling attachment point. MCTAR-06 has pivoting, 1¼" wide swivel for direct sling attachment. Rubber coating on swivel prevents noisy, metal-to-metal contact. MCTAR-07 includes a fixed, dome-shaped stud that accepts your own, standard quick-detach swivel. MCTAR-08 includes a 11/4" wide, 360º rotating, push-button swivel for rapid sling removal. MCTAR-08HD has heavy duty base and swivel that stands up to extreme tactical operations. 1¼" wide, quick-detach swivel limits travel to prevent sling wrapping yet allows necessary movement. MCTAR-08 Mfg: Midwest Industries, Inc. SPECS: Bases - 6061 aluminum, mil-spec hardcoat anodized, matte black; steel setscrew, matte black oxide. MCTAR-08HD - 7/8" (2.2cm) long x 13/16" (3cm) wide. MCTAR-08HDO - 2" (5cm) long x 1" (2.5cm) wide. Other models - 9/16" (1.4cm) long x 13/16&quo

more >>
Brownells
$23.99 See It
Search within results