1 to 20 of  70 products for spa control box

Result for "spa control box"
Gecko in.ye-5 Spa Lower Control Box 0610-221002A

Aeware by Gecko Alliance IN.YE-5 Control System  **p/n 0610-2210022A**   This product is the simplest, most flexible solution when it comes to supporting even the most complex array of spa add-ons and options. The Y series offers the kind of simplicity that makes for a genuine top-of-its-class product. It is the natural choice for anyone who wants an easy-to-understand multi-application solution. The IN.YE-5 offers numerous configuration settings for a true universal control pack. The IN.YE-5 has 22 configuration options to really be the "go-to" system of retrofits for most spas. Features:  Built in Heater Probes Programmable by Key Pad Self Diagnostic & Solid State Water Flow Detection WiFi Ready with use of the in.touch (0608-521012) Amp Plug Ready Operates: Incoming Voltage 120v or 240v Heater 1kw @ 120v or 4kw @ 240v Pump #1 1 or 2 speed (120v or 240v) Pump #2 1 or 2 speed (120v or 240v) Blower/Pump #3 1 speed (120v or 240v) Light 12 volt Circ Pump (120v or 240v) Ozonator (120v or 240v) Note: Circulation Pump and Ozonator must be same voltage with use of the 9920-401369 Amp Splitter Cord. When using a 3rd pump or blower Pump #2 must be 1 speed. System includes: Control Box 0610-221002A Backed by a 1 year manufacturer's warranty and BW Spa Parts exceptional technical support team.

more >>
BW SPA PARTS
$405.95 See It
Gecko in.ye-5 Spa Control System in.k450 Panel BDLYE5K450

Aeware by Gecko Alliance IN.YE-5 Control System with in.k450 control panel **p/n BDLYE5K450**   This product is the simplest, most flexible solution when itcomes to supporting even the most complex array of spa add-ons and options. The Y series offers the kind of simplicity that makes for agenuine top-of-its-class product. It is the natural choice for anyone who wantsan easy-to-understand multi-application solution. Features:   Built in Heater Probes Programmable by Key Pad Self Diagnostic & Solid State Water Flow Detection WiFi Ready with use of the in.touch (0608-521012) Amp Plug Ready Operates: Incoming Voltage 120v or 240v Heater 1kw @ 120v or 4kw @ 240v Pump #1 1 or 2 speed (120v or 240v) Pump #2 1 or 2 speed (120v or 240v) Blower/Pump #3 1 speed (120v or 240v) Light 12 volt Circ Pump (120v or 240v) Ozonator (120v or 240v) Note: Circulation Pump and Ozonator must be same voltage with use of the 9920-401369 Amp Splitter Cord. When using a Pump #3 or Blower Pump #2 must be a 1-speed. System includes: Control Box 0610-221002A Topside BDLK4503OP Amp Cords Key Pad Adapter Plate Backed by a 1 year manufacturer's warranty and BW Spa Parts exceptional technical support team. Not sure if this system will work for you? Give us a call 866-966-9799  

more >>
BW SPA PARTS
$489.95 See It
Gecko M-Class Spa Control System 5.5KW 3-Pumps w/ LED

Gecko M-Class Spa Control System 5.5KW for operation of 3 pumps, circulation pump, blower, ozonator and more. The M-Class Spa Control System can operate: ** Pump #2 2 speed ** ** Air Blower ** ** Ozonator ** Heater: 2 x 15 Box length  13   ** TSC-8/K-8 control panel dimensions 3-1/4 x 7 ** (2) 2- speed pump cord,120/240v, 48, JJ Mini, 14/4 AWG ** Blower cord, 120/240v, 48, JJ-Mini, 18/3 AWG ** Ozone Cord,120/240v, 48, JJ-Mini, 18/3 AWG ** Temperature Sensor thermowell, 3/8 ** Two-Year manufacturers limited return and repair warranty   ???         Programmable filter cycles ???         Current limiting option ???         Overtemp mode protection ???         Real time clock (optional)

more >>
BW SPA PARTS
$869.95 See It
PS6502BHL24 Platinum Spa Control System 4kw L Htr Eco 401

HydroQuip Platinum Series PS6502B Spa Control System with 4kw L-shaped heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6502 Platinum B features the reliability of Balboa Technology.  Will Operate: 2-speed pump #1 1-speed Pump #2 or 1-speed Air Blower Ozonator Circ pump (requires a minimum of 23 gpm) 12v Light   Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 4kw (L-Shaped) Heater (2" unions) with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 401 (Lite Duplex) Top Side 2 Overlays included (2-pumps or 1pump & 1 air blower)   This control system is the perfect solution for any system replacement for a single 2-speed Pump #1 and 1-speed Pump #2 or Air Blower set up where the heater attaches to the discharge pump. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub.   If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)

more >>
BW SPA PARTS
$589.95 See It
PS6501BH24 Platinum Spa Control System 4kw Eco 401

HydroQuip Platinum Series PS6501B Spa Control System with 4kw heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6501 Platinum B features the reliability of Balboa Technology Will Operate:2-speed pump #1OzonatorCirc pump (requires a minimum of 23 gpm)12v Light Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 4kw (15" x 2") Heater with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 401 (Lite Duplex) Top Side (included) This control system is the perfect solution for any system replacement for a single 2-speed set up. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub. If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)

more >>
BW SPA PARTS
$579.95 See It
PS6502BHL24 Platinum Spa Control System 5.5kw L Htr Eco 200

HydroQuip Platinum Series PS6502B Spa Control System with 5.5kw L-shaped heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6502 Platinum B features the reliability of Balboa Technology.  Will Operate: 2-speed pump #1 1-speed Pump #2 or 1-speed Air Blower Ozonator Circ pump (requires a minimum of 23 gpm) 12v Light   Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) 1-speed Pump #2 or Air Blower (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 5.5kw (L-Shaped) Heater (2" unions) with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 200 (mini oval) Top Side 2 Overlays included (2-pumps or 1pump & 1 air blower) This control system is the perfect solution for any system replacement for a single 2-speed Pump #1 and 1-speed Pump #2 or Air Blower set up where the heat attaches to the discharge pump. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub.   If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)

more >>
BW SPA PARTS
$569.95 See It
PS6501BH24 Platinum Spa Control System 4kw Eco 200

HydroQuip Platinum Series PS6501B Spa Control System with 4kw heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6501 Platinum B features the reliability of Balboa Technology. Will Operate:2-speed pump #1OzonatorCirc pump (requires a minimum of 23 gpm)12v Light Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 4kw (15" x 2") Heater with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 200 (mini oval) Top Side (included)This control system is the perfect solution for any system replacement for a single 2-speed set up. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub. If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)  

more >>
BW SPA PARTS
$559.95 See It
PS6501BHL24 Platinum Spa Control System 4kw L Htr Eco 401

HydroQuip Platinum Series PS6501B Spa Control System with 4kw L-shaped heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6501 Platinum B features the reliability of Balboa Technology.  Will Operate: 2-speed pump #1 Ozonator Circ pump (requires a minimum of 23 gpm) 12v Light   Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 4kw L-Shaped Heater (2" Unions) with 24" cords for versatility Heater does not have to be mounted to control box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 200 (mini oval) Top Side (included) This control system is the perfect solution for any system replacement for a single 2-speed set up where the heater sits on the discharge port of the pump. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub.   If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)  

more >>
BW SPA PARTS
$589.95 See It
Gecko in.ye-5 Spa Control System in.k200 Panel BDLYE5K200

Aeware by Gecko Alliance IN.YE-5 Control System with in.k200 control panel **p/n BDLYE5K200**   This product is the simplest, most flexible solution when it comes to supporting even the most complex array of spa add-ons and options. The Y series offers the kind of simplicity that makes for a genuine top-of-its-class product. It is the natural choice for anyone who wants an easy-to-understand multi-application solution. Features:   Built in Heater Probes Programmable by Key Pad Self Diagnostic & Solid State Water Flow Detection WiFi Ready with use of the in.touch (0608-521012) Amp Plug Ready Operates: Incoming Voltage 120v or 240v Heater 1kw @ 120v or 4kw @ 240v Pump #1 1 or 2 speed (120v or 240v) Pump #2 1 or 2 speed (120v or 240v) Blower/Pump #3 1 speed (120v or 240v) Light 12 volt Circ Pump (120v or 240v) Ozonator (120v or 240v) Note: Circulation Pump and Ozonator must be same voltage with use of the 9920-401369 Amp Splitter Cord. When using a 3rd pump or blower Pump #2 must be 1 speed. System includes: Control Box 0610-221002A Topside BDLK2002OP Amp Cords Key Pad Adapter Plate Backed by a 1 year manufacturer's warranty and BW Spa Parts exceptional technical support team. Not sure if this system will work for you? Give us a call 866-966-9799

more >>
BW SPA PARTS
$460.95 See It
PS6603BHL24 Platinum Spa Control System 4kw L Htr HT701S

HydroQuip Platinum Series PS6603B Spa Control System with 4kw L-shaped heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6603 Platinum B features the reliability of Balboa Technology. Will Operate:2-speed pump #12-speed Pump #21-speed Blower or Pump #3OzonatorCirc pump (requires a minimum of 23 gpm)12v Light Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) 2-speed Pump #2 (120 or 230 volt) Air Blower (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 4kw (L-Shaped) Heater (2" unions) with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 7 Button HT701S Top SideThis control system is the perfect solution for any system replacement for a single 2-speed Pump #1, 2-speed Pump #2, Air Blower or pump #3 set up where the heat attaches to the discharge pump. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub. If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)

more >>
BW SPA PARTS
$619.95 See It
PS6501BH24 Platinum Spa Control System 5.5kw Eco 401

HydroQuip Platinum Series PS6501B Spa Control System with 5.5kw heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6501 Platinum B features the reliability of Balboa Technology Will Operate:2-speed pump #1OzonatorCirc pump (requires a minimum of 23 gpm)12v Light Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 5.5kw (15" x 2") Heater with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 401 (Lite Duplex) Top Side (included) This control system is the perfect solution for any system replacement for a single 2-speed set up. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub. If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)

more >>
BW SPA PARTS
$579.95 See It
PS9704 Platinum Spa Control System 5.5kw no GFCI

HydroQuip Platinum Series PS9704 Spa Control System with 5.5kw heater and no GFCI, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The Platinum Series S9704 can operate the following: Pump#1 2 speeed (120v or 240v) Pump#2 2 speed (120v or 240v) Pump#3 1 speed (120v or 240v) Air Blower (120v or 240v) Circulation pump Ozonator LightIncluded in Kit: 15" 5.5kw Slide Heater (24" wire) Platinum Control Box (Gecko PCB) 10 button Topside Topside adapter plate New Component Cables Thermowell Light w/ cable Full 1 Year Warranty 

more >>
BW SPA PARTS
$729.95 See It
Alpine Square Bubble Spa B-091

With square shape and 4+2 (four adults and 2 children) seating capacity. Alpine brings harmony to your bathroom or patio design. Strategically placed air jets release thousands of air bath bubbles to create a soothing spa environment. FEATURES * Patented square shape spa * Rhino-Tech 6-layer reinforce PVC material * All around bubbling design with 132 powerful air jets * Whisper quiet design to make a soothing spa treatment * I-beam spa construction to make the spa rigid and durable * PTC ceramic heating technology. Heats up to 42°C/104 °F(US) * Top cover with foil inside to prevent heat loss. Buckle lid with ground mat set. * Advanced control box for user friendly operation and provides quick inflation in minutes * Easy drainage design with garden hose adapter for quick and complete water removal * Manometer, spa bladder, upgraded filter cartridges, and installation DVD included SPECIFICATIONS Dimensions: 1.85 x 1.85 x 0.68mH (73" x 73" x 27"H) Water Capacity: Approx. 930 liters (245 gallons) Net Weight: Approx. 30kg (66lbs) Air Jet: 132 Cover Material: Laminated PVC - Charcoal Grey

more >>
Pool Supplies Superstore
$659.99 See It
PS9704 Platinum Spa Control System 4kw no GFCI

HydroQuip Platinum Series PS9704 Spa Control System with 4kw heater and no GFCI, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The Platinum Series S9704 can operate the following: Pump#1 2 speeed (120v or 240v) Pump#2 2 speed (120v or 240v) Pump#3 1 speed (120v or 240v) Air Blower (120v or 240v) Circulation pump Ozonator LightIncluded in Kit: 15" 4kw Slide Heater (24" wire) Platinum Control Box (Gecko PCB) 10 button Topside Topside adapter plate New Component Cables Thermowell Light w/ cable Full 1 Year Warranty 

more >>
BW SPA PARTS
$729.95 See It
PS6603B Platinum Spa Control System 5.5kw

HydroQuip Platinum Series PS6603B Spa Control System with 5.5kw heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6603 Platinum B features the reliability of Balboa techology.  The Platinum Series PS6603B can operate the following: Pump#1 2 speeed (120v or 240v) Pump#2 2 speed (120v or 240v) Air Blower (120v or 240v) Ozonator LightIncluded in Kit: 15" 5.5kw Slide Heater Platinum Control Box (Balboa PCB) 7 button Topside Topside adapter plate New Component Cables Thermowell Light w/ cable Full 3 Year Warranty 

more >>
BW SPA PARTS
$599.95 See It
PS6603 Platinum Spa Control System 4kw HCGFCI

HydroQuip Platinum Series PS6603 Spa Control System with 4kw heater and HCGFCI featuring a slide heater for most heater retro fit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application. This slide technology means that there is chance that you will need to replumb your spa due to replacing your old control system. The Platinum Series PS6603 can operate the following:  Pump#1 2 speed (120v or 240v) Pump#2 1 or 2 speed (120v or 240v) Blower (120v or 240v) Circulation pump Ozonator LightIncluded in kit: 15" 4kw Slide Heater (24" wire) Platinum Control Box (Gecko PCB) ECO-3 Topside Panel Eco-3 Adapter Plate New Component Cables Thermo Well Light w/ cable Full 1 Year Warranty HCGFCI

more >>
BW SPA PARTS
$639.95 See It
Gecko in.ye-5 Spa Control System in.k35 Panel BDLYE5K353OP

Aeware by Gecko Alliance IN.YE-5 Control System with in.k35-OP control panel **p/n BDLYE5K353OP** This product is the simplest, most flexible solution when itcomes to supporting even the most complex array of spa add-ons and options. The Y series offers the kind of simplicity that makes for agenuine top-of-its-class product. It is the natural choice for anyone who wantsan easy-to-understand multi-application solution. Features: Built in Heater Probes Programmable by Key Pad Self Diagnostic & Solid State Water Flow Detection WiFi Ready with use of the in.touch (0608-521012) Amp Plug Ready Operates: Incoming Voltage 120v or 240v Heater 1kw @ 120v or 4kw @ 240v Pump #1 1 or 2 speed (120v or 240v) Pump #2 1 or 2 speed (120v or 240v) Blower/Pump #3 1 speed (120v or 240v) Light 12 volt Circ Pump (120v or 240v) Ozonator (120v or 240v) Note: Circulation Pump and Ozonator must be same voltage with use of the 9920-401369 Amp Splitter Cord. When using a Pump #3 or Blower Pump #2 must be a 1-speed. System includes: Control Box 0610-221002A Topside in.k35-3OP Amp Cords Key Pad Adapter Plate Backed by a 1 year manufacturer's warranty and BW Spa Parts exceptional technical support team. Not sure if this system will work for you? Give us a call

more >>
BW SPA PARTS
$449.95 See It
PS6501BH24 Platinum Spa Control System 5.5kw Eco 200

HydroQuip Platinum Series PS6501B Spa Control System with 5.5kw heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6501 Platinum B features the reliability of Balboa Technology Will Operate:2-speed pump #1OzonatorCirc pump (requires a minimum of 23 gpm)12v Light Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 5.5kw (15" x 2") Heater with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 200 (mini oval) Top Side (included)This control system is the perfect solution for any system replacement for a single 2-speed set up. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub. If your not sure if this will work for your application give us a call. 866-966-9799 (tech support) 

more >>
BW SPA PARTS
$559.95 See It
Gecko IN.XE Complete Spa Control System w/ K200 Topside

Gecko Alliance hot tub control pack IN.XE known for its ground breaking features for unsurpassed innovation, reliability & safety in the industry. IN.XE comes with a high performance heat.wav heater. With no pressure switch, it features in.flo integrated dry-fire protection. Comes standard in a 240v / 4 kW configuration, IN.XE's heat.wav heater can be easily converted to dedicated 120v / 1kW by a simple switch of a cable connection. The BDLXE01 can operate the following components: ** Pump #1 2-speed 240 volt ** ** Pump #2 1-speed 240 volt ** or ** Air Blower 120/240 volt ** ** Ozonator 120 volt ** ** 12 volt Light ** ** 120 volt Auxiliary (constant output) **   Gecko IN.XE Complete Retro-Fit Control System w/ K200 Topside. Update your old spa with Gecko Alliance's water proof control system to revitalize your old spa to run like new again. The IN.XE complete control system includes:   - IN.XE (0602-221022) control box - K200 topside control w/ inlay - 5 piece cords (240v P1 2spd, 240v P2 1spd, 120v Blower/Ozone, 12v Light, 120v LC acc.) - Owners/installation manual .Weight: 4.76 kg (10.5 lbs) Dimensions (W x H x D) 17.38" x 11.75" x 5.1"   Features:   - IN.XE's cable bay was designed to ease wire insertion. Its terminal bloc has more room to insert wires. Tighter input connection reduces heat generated for increased component lifetime.   - Only serviceable parts, terminal bloc, fuses, heater and probe connectors are made accessible to service technicians. Electronic components are protected in separate and inaccessible compartments.   - IN.SEAL provides extra level of protection against water infiltration. Connectors and power box are designed to be watertight and no water can be in direct contact with electrical components. (IPX5)   - Totally waterproof, IN.LINK plugs and connectors are designed to ensure that all cables of equipment used to make a spa work properly are well connected at their intended connection port, eliminating any risk of mis-wiring.   - IN.FLO is an all-electronic dry-fire protection of IN.XE's heat.wav heater. IN.FLO eliminates the burden of adjustments, calibrations and failures associated to usual water flow sensors.   - IN.XE comes with IN.K200, a brand new keypad that offers all the cool features of IN.KEYS series top side controls like clean interface, big and crisp characters on its display, true tactile feel and sleek elegance.   - Gecko Alliance provides a one year manufactures warranty on the IN.XE control pack.  

more >>
BW SPA PARTS
$459.95 See It
PS6502BHL24 Platinum Spa Control System 5.5kw L Htr Eco 401

HydroQuip Platinum Series PS6502B Spa Control System with 5.5kw L-shaped heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6502 Platinum B features the reliability of Balboa Technology.  Will Operate: 2-speed pump #1 1-speed Pump #2 or 1-speed Air Blower Ozonator Circ pump (requires a minimum of 23 gpm) 12v Light   Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 5.5kw (L-Shaped) Heater (2" unions) with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 401 (Lite Duplex) Top Side 2 Overlays included (2-pumps or 1pump & 1 air blower)   This control system is the perfect solution for any system replacement for a single 2-speed Pump #1 and 1-speed Pump #2 or Air Blower set up where the heater attaches to the discharge pump. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub.   If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)

more >>
BW SPA PARTS
$589.95 See It
Search within results