No exact matches found for stepdown transformer 2u rackmount 208v input 120v 20a output 4 l520r outlets
100 similar items found
PDU - Limited Warranty: Lifetime - Form Factor: Rack-mountable - Input Voltage: 120 V AC - Output Voltage: 120 V AC - Power Rating: 20 - Input Receptacles: 1 x NEMA L5-20P - Output Receptacles: 13 x NEMA 5-20R
PDU - Limited Warranty: Lifetime - Form Factor: Rack-mountable - Input Voltage: 120 V AC - Output Voltage: 120 V AC - Power Rating: 20 - Output Receptacles: 13 x NEMA 5-20R
PDU - Limited Warranty: 2 Year - Width: 2.2" - Height: 70" - Depth: 2.7" - Form Factor: Vertical Rackmount - Input Voltage: 120 V AC - Output Voltage: 120 V AC
Step Down Transformer - Width: 2.3" - Height: 2.3" - Depth: 1.8" - Form Factor: Wall Mountable - Input Voltage: 110 V AC - Output Voltage: 16 V AC - Power Rating: 10 VA
Dual Conversion Online UPS - Limited Warranty: 2 Year - Width: 17.5" - Height: 3.5" - Depth: 19" - Form Factor: Tower/Rack Mountable - Country of Origin: China - Input Voltage: 110 V AC
Line-interactive UPS - Limited Warranty: 2 Year - Width: 17.5" - Height: 3.5" - Depth: 13.5" - Country of Origin: China - Input Voltage: 110 V AC - Output Voltage: 120 V AC
Line-interactive UPS - Limited Warranty: 2 Year - Width: 17.5" - Height: 3.5" - Depth: 12.5" - Country of Origin: China - Input Voltage: 110 V AC - Output Voltage: 120 V AC
STEP DOWN TRANSFORMER RACK MOUNT 2U 20 8V IN/120V OUT - 5-20 RECEPT (ITEM ALSO KNOWN AS : APC-AP9626) [ap9626]
Free Shipping on orders over $50!
Rackmount Spacer Blank, 2U
$50+ Orders Ship Free
AC Stick Welder, Phase 1, Output Range (Amps) 50/70, Rated Output 50A @ 22V, 50 Amps AC, 20 Percent, Input (Amps) 20, Input Voltage 115, OCV 42, 60 Hz, 10.2, 6.7, 13, Portable, Lightweight, Allow 120V Input, Two-taps Current Control, Thermal Overload Protection, AC Stick Welding for Do It...
Product Information: About The Hatch PS12-20L Electronic Plug-In Transformer - 20 Watt - 11.5 Volt Output - 120 Volt Input The Hatch PS12-20L Electronic Plug-In Transformer has an input voltage of 120 volts and an output voltage of 11.5 volts. The max input watts of the Hatch PS12-20L Electronic...
Freedom 458 Inverter/ChargerAC Power Inverter with High Surge Capability, 3-Stage ChargerWith filtered modified sine wave output, Freedom inverter/chargers run virtually anything, from electrical equipment to appliances and electronics in your RV. Temperature controlled multistage charging ensures that your batteries are recharged quickly, and automatic shutdown and other safety features protect your expensive deep-cycle batteries from excessive depletion. For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom 458 systems can be paired with optional Link instrumentation.Product FeaturesMSW AC power inverter with high surge capabilityAutomatic 3-stage battery chargerTemperature compensation with equalization stage provides optimal charging of deep cycle batteriesBuilt-in transfer switch automatically transfers between inverter power and incoming AC powerPower sharing prevents source AC input circuit breaker from tripping Customized settings can be programmed with the Freedom Basic Remote or Link 1000 panelsIncludes battery temperature sensor30 month warrantyProtection FeaturesOver voltage and under voltage protectionOver-temperature protectionOverload protectionShort circuit protectionElectrical Specifications - InverterOutput power (continuous): 2000W Surge power (AC amps): 50AOutput frequency regulation: 60HzInverter voltage regulation: 120V +/-5% true RMS Output wave form: Modified sine waveEfficiency (full load): 85% Peak efficiency: 92% No load current draw (idle mode): 0.12AAC output connections: Single - 20/15 Circuit BreakersAC input connections: Single AC transfer switch: 30AElectrical Specifications - ChargerCharge rate: 100A DCAC input voltage range: 90 130 VACBattery voltage (nominal): 12 VDCBattery voltage range: 10.0 15.5 VDCLow battery cut-out: 10.0 VDCAC input (max. charge mode): 21A AC Bulk charge voltage: 14.3 VDC*** Float charge voltage: 13.4 VDC*** Equalize charge voltage: 16.3 VDCCharge control: 3-stageBattery type settings: Wet / Gel 1 / Gel 2 / AGM Equalization: YesTemperature sensitive charging: Yes***Default value varies with battery typ and temperature
GE 360 watt Output - 120 volt Input - Electronic - Lightech | GE Halogen Transformer (GELT360A12012MLT 66978 66978)
This unit allows you to use any US style appliance with an input Wattage of up to 45W from a UK mains supply If you import an American electrical mains appliance there is almost certainly going to have a 2 pin Blade plug on it and require a 110V mains supply as such the UK supply without a step down is unsuitable and just a plug adapter won't work and could damage your equipment. This Stepdown reduces the Voltage and outputs just 110-120V providing a safe and reliable power source for your equipment. Simple to use plug the 3 PIN UK side into your mains outlet and then plug your US appliance into the socket on the unit. Specification Input: AC 230-240V 50Hz Output: AC 110-120V 45W Designed for indoor use only. T2 Enterprises Ltd does not accept any liability for damage to any equipment through miss-use of this appliance please ensure that your appliance does not exceed the maximum wattage capacity as detailed in the description. This item is Suitable for Nintendo DS not suitable for appliances such as Hair Driers Curling Tongs Toasters or other heating appliances exceeding 45W INPUT May not be suitable for some aquatic air pumps For using 100-120 volt appliances in countries that provide a 220-240 volt mains source Can be used for appliances with power up to 45W Input : 230V 50Hz Output : AC 110V 45W
The ICP Das I-7019R is a DAQ Module with (8) Analog Inputs for Voltage, Current or Thermocouple Sensor Probes. The Analog Inputs feature 9 selectable voltage ranges (+/-15mV, +/-50mV, +/-100mV, +/-150mV, +/-500mV, +/-1 Volt, +/-2.5 Volts, +/-5.0 Volts and +/-10 Volts), +/-20 mA current measurement range and accepts type J, K, T, E, R, S, B, N, C, L, M and L2 type thermocouples. In addition to its 16-bit resolution, the analog inputs sample up to 10/Seconds, feature a +/-0.05% accuracy and an input impedance of 20M Ohms. The single digital input channel feature and input frequency of 50Hz (Max) and 1ms pulse width (min). The (2) digital outputs have an open collector to 30 Volts and an output load of 30 mA (Max) per channel. As a part of the I-7000 Series, the I-7019R DAQ module also features screw terminal block, RS-485 serial communications interface and led indicators for power and communications. The DCON Utility and EZ data logger software are available to control and configure the ICP Das module.
WAC EN-B12PY-AR Make sure you have all of the necessary components to fulfill the lighting look you desire. This electronic transformer will aid in keeping your lovely W.A.C. light fixtures shining brightly and beautifully throughout your home. Features: -Electronic Transformer.-Accessories include MTB01 connection box.-Separate line volt and low volt wiring compartments.-UL listed.-NOTE: Track Lighting is not universal. W.A.C. Lighting products can only be used with W.A.C. Lighting products or warranty is void..-Choose output of: 24V/150W, 12V/250W, or 24V/300W.-120V input.-For Use With: Track Lighting.-Product Type: Electronic.-Location: Remote Mount.-Finish: Black.-Voltage Input: 120.Dimensions: -Overall Height - Top to Bottom: 2.5.-Overall Width - Side to Side: 3.38.-Overall Depth - Front to Back: 6.5.-Overall Product Weight: 0.61. Output: 12v 250W
Part No. ML200RT - Cord Length 2 ft. - Width 5.25 in. - Height 6.75 in. - Depth 5 in. - Input Voltage 120 - Maximum Wattage 200 Watts - Output Voltage 12 Volt - UL Listed Outdoor Only - Warranty 5 Years -
Studio Monitors - The Fostex RM-2 is a compact rackmount stereo monitor that's designed to deliver audio in any location where space is tight. Ideal for mobile control rooms, surveillance applications, theme park booths, and more, the RM-2 takes up just one rackspace and offers a 26-dot stereo LED meter. Stereo analog inputs and a stereo AES/EBU digital input are on the rear of the RM-2 and you can choose between sources via controls on the front panel. In addition to the front-mounted speakers, a headphone jack is provided. For monitoring in tight spaces, look no further than the Fostex RM-2.Fostex RM-2 Rackmount Stereo Monitor at a Glance:Perfect for tight environmentsAnalog and digital inputs with A/B selectorDual concentric volume control and headphone jackFront-panel meteringPerfect for tight industrial environmentsFostex designed the RM-2 with small spaces in mind. It only takes up one rackspace, so it's easy to put the RM-2 anywhere monitoring needs exist - such as in mobile control rooms or theme park booths. Analog and digital inputs with A/B selectorThe RM-2 gives you both digital and analog inputs to suit your monitoring needs. What's more, a front-panel A/B input selector lets you quickly toggle between the inputs.Dual concentric volume control and headphone jackOn the front panel of the Fostex RM-2 there are a headphone jack and a volume control. When you plug into the high-gain headphone jack, the onboard speakers are conveniently muted. You can easily control the left and right levels of whatever source you have selected - the back part of the volume control affects the right channel input volume while the front portion adjusts the left channel input volume.Front-panel meteringWith the Fostex RM-2, you can easily keep an eye on your levels via its front-panel 26-dot LED meter display. Fostex RM-2 Rackmount Stereo Monitor Features:Rackmount stereo powered monitor speaker systemAES/EBU digital inputIndependent MUTE functionSPEAKER SECTIONUnit: 110 x 40mm cone type, magnetically shielded, x 2Impedance: 8 ohmsOutput SPL: 84 dB/W (1m)Frequency response: 200Hz to 20kHzRated output power: 10W or more (8 ohms, 1kHz)Residual noise: -60 dBV or less (DIN AUDIO)Distortion: 0.5% or less (10W / 4 ohms, 1kHz)Digital Input: XLR AES/EBUSampling frequency: 44.1kHz to 96 kHzAnalog Inputs: XLR / 1/4" combi-jackHeadphone InputConnector: 1/4" stereo jackApplicable load imp. 8 ohms or moreRated output power 20mW + 20mW (32 ohms, 1kHz)Level meters: 26-dot LED meter x 2Power Requirements: 100 - 240V , 50/60HzPower Consumption: 10WThe Fostex RM-2 puts monitoring into whatever tight space you need it! Surround & Multi-Speaker Systems
12V, 150w Transformer for Hide-a-liteUL listed for dry locations and feature a thermal overload to prevent overheatingresettable circuit breaker for electrical safety, does not include wire (provided by light system)Must be vertically mountedSwitches and dimmers (induction type only) must be installed in the primary (input) side only of the low voltage transformerMeasures 4-1/8"W, 3-3/4" depth, 8-1/2" ht
Step Up Transformer - Input Voltage: 110 V AC - Output Voltage: 240 V AC - Power Rating: 50 VA