1 to 20 of  100 products for strong spas rio spa grey granite ss13050400

No exact matches found for strong spas rio spa grey granite ss13050400

100 similar items found

Replacement Spa Pillow - Cool Grey 72597

This is a genuine factory replacement spa pillow (part number 72597) for Hot Spring Spa models from 2002 (2nd quarter) through 2007 (1st quarter) for these model and year of Hot Spring Spas: Hot Spring Spas Grandee 2002, 2003, 2004, 2005, 2006, 2007...

more >>
The Pool and Spa Center
$26.86 See It
Hot Spring Warm Grey Spa Pillow 74316

This is a factory replacement Hot Spring Warm Gray Spa Pillow (part number 74316) for model years 2007 (2nd quarter) to current.

more >>
The Pool and Spa Center
$36.30 See It
Grey, Legend Neck Jet Master Spa Pillow

Grey, Legend Neck Jet Pillow (2005-2009)

Master Spa Parts
$38.66 See It
Master Spa Jets, 3.5 inch Directional with O Grey / Black

3.5 inch Directional with O Grey / Black

Master Spa Parts
$10.24 See It
FC-0126 Strong Spas, Antiqua Spa Filter

The Filbur FC-0126 Pool and Spa Filter replaces the OEM part number PSANT20 in Strong Industries Antiqua spas.

more >>
FiltersFast
$21.99 See It
C5 CR Digital Remote Heater Spa Control System 120v 240v

The beauty of the C5 control series is its simplicity. All the components from the relays to the fuses are located right on the board. This is nothing new, except that the C5 series accomplishes this without having high voltage run through the board. With this unique design, you get the convenience of an all-in-one board with the safety and longevity of low power electronics. This control system is set up for a 120v or 240v power supply. The control come standard with primary and secondary pumps wired for 240v, light is wired for 12v, and all other components (blower, ozone, circulation pump, stereo/aux) is wired for 120v. Voltages of these controls may easily be changed by moving the neutral wires at the power block in the control as needed. (see instruction manual for wiring configuration)   Control System Can Operate the Following: 1- Pump #1 120v/240v 2 speed 1- Pump #2 120v/240v 1 Speed  ** and ** 1- Pump #3 120v/240v 1 speed              ** or ** 1- Air Blower 120v/240v 1- Ozonator 120v/240v 1- Audio/Aux 120v/240v 1- 12v light 1- Circulation Pump (min 23 GPM) 120v/240v   Standard Feautures: Self-Standing Control Choice of T7, T8-S or T8-X Topside with adapter plate 2 Speed 1st Pump Ready / Cord included 2 Speed 2nd Pump Ready 1 Speed Aux Ready (Pump #3 or Blower) Circ. Pump Ready (min 23 GPM) 12v Spa Light Ready / Cord included Ozone Ready Remote 5.0kw Stainless Steel 15"Heater (4ft Power Cable) Thermowell for thru wall applications Dual Voltage Transformer   Control System 13" tall x 19" wide x 6" deep Choice Of Topside Command Centers   T8-X & T8-S Topside Dimensions: 6-3/8" x 3-3/8"  T7 Topside Dimensions: 5" x 2-1/2"   Easiest to Install Topside on the Market The T7 Command Center is United Spa Control's entry-level topside offering. Its simple interface and compact easy-to-install design have quickly made it a favorite among those looking to upgrade from other/older control systems. The T7 features our patent-pending Spa-Touch™ switching technology, can operate any possible hardware configuration of a C5 Series electronic control, and also provides basic filtration functions.    Our Most Advanced Topside Yet! The new T8 Series Command Centers are our most ambitious and feature-packed topsides we've engineered yet. The T8-S is for designed for spas with single or dual booster pumps, while the T8-X features an extra button to operate an additional booster pump or air blower. Both of the new T8 Command Centers actually share the exact same hardware. Our Spa-Touch™ switching technology along with advances in our software allow our latest topsides to have the same versatility as our control boxes. This means our OEM customers can stock one topside body, and use different custom decals and software settings to make the same hardware look, feel, and act like distinctly different topsides.    Safety, built-in   The C5 series of controls are one of the industrys first controls to be fully teste

more >>
BW SPA PARTS
$399.95 See It
Kauai-Quick Ship 3-person "Plug & Play" Corner Spa

spend $25, get free shipping

Find hot tubs, spas and saunas at Target.com! Give your home a relaxing and spa-like feel with this corner spa. The white marble interior and wood-grain pvc outside give it a stylish look. With a three-person capacity, it's perfect for couples or

more >>
Target
$3,199.00 See It
PVC Gray Color Spa Step

spend $25, get free shipping

Find swimming pool and spa accessories at Target.com! Get in and out of your bathtub with ease with the qca spas pvc gray color spa step. It has 2 steps at a convenient height. The hot tub step has a rigid plastic construction for reliability. Its

more >>
Target
$99.99 See It
QCA Molokai-Quick Ship 4-person "Plug & Play" Spa

spend $25, get free shipping

Find hot tubs, spas and saunas at Target.com! spa shells are manufactured from lucite-xtra acrylic with an abs base layer for strength (blue denim only) . 82.5 l x 56.5 w x 30 d . plugs into any 120 volt/15 amp outlet with the included, built in 15

more >>
Target
$2,968.99 See It
QCA Maui-Quick Ship 6-person Lounger Spa

spend $25, get free shipping

Find hot tubs, spas and saunas at Target.com! spa shells are manufactured from lucite-xtra acrylic with an abs base layer for strength (blue denim color only) . 82 l x 79 w x 36 d . weather guard maintenance-free cabinet that provides the look of

more >>
Target
$3,999.00 See It
C5 CB Control System w/T8X Topside Command Center

The beauty of the C5 control series is its simplicity. All the components from the relays to the fuses are located right on the board. This is nothing new, except that the C5 series accomplishes this without having high voltage run through the board. With this unique design, you get the convenience of an all-in-one board with the safety and longevity of low power electronics. This control system is set up for a 240v or 120 volt power supplies. The control come standard with primary and secondary pumps wired for 240v, light is wired for 12v, and all other components (blower, ozone, circulation pump, stereo/aux) is wired for 120v. Voltages of these controls may easily be changed by moving the neutral wires at the power block in the control as needed. (see instruction manual for wiring configuration)   The C5 with T8-X is for use with 2 Pumps, 2 Pump & Air Blower or 3 Pump system Retro-Fit   This Control System Can Operate the Following: 1- Pump #1 120v/240v 2 speed 1- Pump #2 120v/240v 1 Speed  ** and ** 1- Pump #3 120v/240v 1 speed              ** or ** 1- Air Blower 120v/240v 1- Ozonator 120v/240v 1- Audio/Aux 120v/240v 1- 12v light 1- Circulation Pump (min 23 GPM) 120v/240v   Features: Self-Standing Control T8-X 7 Button Digital Topside with adapter plate 2 Speed 1st Pump Ready / Cord included 2 Speed 2nd Pump Ready 1 Speed Aux Ready (Pump #3 or Blower) Circ. Pump Ready 12v Spa Light Ready / Cord included Ozone Ready Flo-Thru Stainless Steel Heater Thermowell for thru wall applications Dual Voltage Transformer 13" Tall x 19" Wide x 6" Deep   T8-X Topside Dimensions: 6-3/8" x 3-3/8" The new T8 Series Command Centers are our most ambitious and feature-packed topsideswe've engineered yet. The T8-S is for designed for spas with single or dualbooster pumps, while the T8-X features an extra button to operate an additionalbooster pump or air blower. Both of the new T8 Command Centers actually share the exact same hardware. Our Spa-Touch™switching technology along with advances in our software allow our latesttopsides to have the same versatility as our control boxes. This means our OEMcustomers can stock one topside body, and use different custom decals and softwaresettings to make the same hardware look, feel, and act like distinctlydifferent topsides. The T8-S and T8-X Command Center are also packed with features above andbeyond their predecessors: Larger 4-digit alpha-numeric displays Built-in clocks for more control over filtration timing Easy-to-install design (3-hole installation) Reversible display (Display can be rotated to be visible from either inside or outside of the tub) Temperature and settings locks (Lock the set temperature, user settings, or both) Redesigned, more intuitive interface and menu navigation Safety, built-in The C5 series of controls are one of the industrys first controls to be fully tested and approved under the latest editions of UL testing requirements for the United States, an

more >>
BW SPA PARTS
$409.95 See It
Belize Oval II Hot Tub Spa - PS8300

The fabulous Belize Oval II spa is a design triumph. Built with the same famous level of quality and durability as our full-sized Belize acrylic spas, yet with a smaller footprint, it is ideal for people looking for a space-saving design without sacrificing comfort. The Oval II is the ultimate personal spa, seating two adults with the leg room of a 7 ft. square hot tub. But with about half the width, it requires only about as much space as a patio lounge!

more >>
The Spa Depot
$3,999.00 See It
C5 CG Digital Spa Control System NO Heater 120v 240v

The beauty of the C5 control series is its simplicity. All the components from the relays to the fuses are located right on the board. This is nothing new, except that the C5 series accomplishes this without having high voltage run through the board. With this unique design, you get the convenience of an all-in-one board with the safety and longevity of low power electronics. This control system is set up for a 120 volts or 240 volts power supply. The control come standard with primary and secondary pumps wired for 240 volts, light is wired for 12v, and all other components (blower, ozone, circulation pump, stereo/aux) is wired for 120v. Voltages of these controls may easily be changed by moving the neutral wires at the power block in the control as needed. (see instruction manual for wiring configuration)  Control System Can Operate the Following: 1- Pump #1 120v/240v 2 speed 1- Pump #2 120v/240v 1 Speed  ** AND ** 1- Pump #3 120v/240v 1 speed              ** OR ** 1- Air Blower 120v/240v 1- Ozonator 120v/240v 1- Audio/Aux 120v/240v 1- 12v light 1- Circulation Pump 120v/240v 1- GAS or Auxillary Heater (not included)   Standard Feautures: Self-Standing Control Choice of T7, T8-S or T8-X Topside with adapter plate 2 Speed 1st Pump Ready / Cord included 2 Speed 2nd Pump Ready 1 Speed Aux Ready (Pump #3 or Blower) Circ. Pump Ready (min 23 GPM) 12v Spa Light Ready / Cord included Ozone Ready NO Heater Included Thermowell for thru wall applications Dual Voltage Transformer Dimensions:   13" Tall x 19" Wide x  6" Deep   Your Choice Of Topside Command Centers   T8-X & T8-S Topside Dimensions: 6-3/8" x 3-3/8"  T7 Topside Dimensions: 5" x 2-1/2"   The Easiest to Install Topside on the Market The T7 Command Center is United Spa Control's entry-level topside offering. Its simple interface and compact easy-to-install design have quickly made it a favorite among those looking to upgrade from other/older control systems. The T7 features the patent-pending Spa-Touch™ switching technology, can operate any possible hardware configuration of a C5 Series electronic control, and also provides basic filtration functions.    Our Most Advanced Topside Yet! The new T8 Series Command Centers are our most ambitious and feature-packed topsides we've engineered yet. The T8-S is for designed for spas with single or dual booster pumps, while the T8-X features an extra button to operate an additional booster pump or air blower. Both of the new T8 Command Centers actually share the exact same hardware. Our Spa-Touch™ switching technology along with advances in our software allow our latest topsides to have the same versatility as our control boxes. This means our OEM customers can stock one topside body, and use different custom decals and software settings to make the same hardware look, feel, and act like distinctly different topsides.    Safety, built-in   The C5 series of controls are one of the industrys first controls

more >>
BW SPA PARTS
$339.95 See It
Marquis 50 Spa Filter Compatible for Marquis Spas

This Filbur FC-0195 replaces the Marquis 50 Spa Filter that is used in Marquis Spas. This Filbur spa filter is also compatible with OEM filter 370-0237 and the Unicel 5CH-502 filter. This Filbur spa filter matches or exceeds the quality of Marquis

more >>
FiltersFast
$26.99 See It
Highland Series Cumberland Model Spa Filter 73532

Genuine replacement filter for Caldera Spas Highland Cumberland model spa, 50 sq ft filter part number 73532. This filter will work on the following models: Highland Cumberland 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Dimension Outside diameter...

more >>
The Pool and Spa Center
$49.95 See It
Cal Spas 5BHP 240v Replacement Spa Pump PRC504

Power Right Industries PRC504 5BHP 240 volt 2-Speed Complete Spa Pump with 2" intake/discharge ports with 4-pin amp cord. This pump is commonly found in Cal Spas & Coleman brand hot tubs under the old PUM22000951 or PRC9089X part number.   Frame: 56 Voltage: 220, 230 & 240 applications Amp Hi: 10.5 Amp Lo: 3.8 HP: 2.5ohp/5.0spl 4-pin Amp cord is included   Note: The 2"  intake/discharge ports outside measurement will actually measure 3.0 inches.When replacing a Cal Spas pump remember to replace the pump union o-rings

more >>
BW SPA PARTS
$369.95 See It
Master Spas Eco Pur Spa Filter Compatible, FC-1007

This Filbur FC-1007 spa filter replaces the Master Spas Eco Pur Spa Filter that is used in the Master Spas Eco Pur filtration system (2002-2007). It is also a compatible spa filter for the Unicel C-8341 and the Pleatco PMA45-2004-R spa filters.

more >>
FiltersFast
$31.99 See It
Tri-X Spa Filter for Accolade - 73178 3 PACK

This is a 3 pack of Tri-X ceramic spa filter cartridges for Hot Spring Spas Accolade model years 2005 and 2006. The unique 3 dimensional design enables it to filter twice the water per minute than the paper filter (65 sq. ft. versus 30 sq. ft.) that...

more >>
The Pool and Spa Center
$160.80 See It
Dynasty Spas 4kW Low Flo Vertical Spa Heater 240V E2400-0012

Dynasty Spas 4kW low flow replacement vertical spa heater Therm Products part# E2400-0012. Stainless Steel heater measures 3" x 7-3/4" and has a element rated at 4kW/240 volts, with 3/4" barb x 3/4" 90 degree barb inlet/outlet. Also Replaces part numbers; 48-3600-40-012, 2-00-0068 and 23842. Therm Products E2400-0012 spa heater has a one year manufacturer's warranty.

more >>
BW SPA PARTS
$151.95 See It
FC-0536 Bullfrog Spas Pool & Spa Filter

The Filbur FC-0536 7 3/4 x 5 3/4 Pool & Spa Filter replaces Unicel part number 8CH-950. Also known as part numbers FC0536 and 10-1035. Fits Bullfrog Spas.

more >>
FiltersFast
$19.99 See It
Search within results
  • Find by Price
    • $ to $