Folding table, adjustable height 22 - 32, high-pressure top on 3/4 inch high density particle board core with backer sheet, 1 inch 18 gauge steel pedestal legs, 1-5/8 inch one piece steel apron, mar-proof plastic foot caps & edge molding, automatic lock-open mechanism, 24 x 60 inches, gray granite top with gray frame and gray t-mold ( Correll - CFA2460PX 15 )
Chemical and water resistant Double book compartments Rubber liquid protecting leg boots Adjustable glides for levelingBook Compartment: 12-3 4"D x 14-1 4"L x 4"H Corner Braces: 13-gauge steel Height: 30 Leg Material: Solid oak Length: 60 Top Color: Black Weight: 87 lbs Width: 24
-- ANSI/NSF Standard 2 -- 35" - 36" Height -- Adjustable Stainless Steel Shelf -- 18 Ga. 430 Stainless Top -- All Stainless Shelf Legs & S/S Bullet Feet
Stallion flat top work table with adjustable stainless steel bracing, 16 gauge 300 series stainless steel. 5 high, 1.5 deep clip-down riser. Stallion edge, straight turndown on sides, metal bullet feet. 24 x 60 ( John Boos - ST6-2460SBK )
-- More Heavier Duty than the Economy w 3 Welded Hat Channels for Support -- ANSI/NSF Standard 2 -- 35" - 36" Height -- Adjustable Galvanized Undershelf --18 Ga. 430 Stainless Top -- Galvanized Legs
-- 18 Ga. 430 Stainless Top -- 35" - 36" Height -- All Stainless Adjustable Cross Bracing -- ANSI/NSF Standard 2
Solid oak finish Resistant to 13 chemicals (2) Built-in book compartments Rubber footing adjustable glidesBook Compartment: 12-3 4"D x 14-1 4"L x 4"H Height: 36 Length: 60 Width: 24
-- ANSI/NSF Standard 2 -- 35" - 36" Height -- Adjustable all Stainless Shelf -- 3 Hat Channel for Extra Support -- 18 Ga. 430 Stainless Top -- All Stainless Shelf, Leg & S/S Bullet Feet -- 2" Back Splash
Work Table, 24 W x 60 L, 1-1/2 laminated hard rock maple flat top, galvanized legs, side & rear adjustable bracing, KD, NSF ( John Boos - JNB03 )
Work Table, 24 wide 16 gauge 430 series stainless steel top, without splash, 60 long, galvanized adjustable undershelf, gussets, legs & adjustable plastic bullet feet ( Advance Tabco - AG-245 )
Your rambunctious students are no match for the heavy-duty construction of the Smith Carrel 1500 Series Computer Table. Features like steel legs, a laminate top and anti-sag rail system keep your table out of the maintenance room and in your classroom. The legs adjust from 24 inches to 29 inches high. ADA-approved leg inserts are also available. Cord grommet holes and a cord bin keep the work area clutter-free.
Strong enough for light- to moderate-use activities, the Correll Melamine Top Folding Training Table is an affordable choice for your school. A steel apron and banding on the edges protect the folding table from wear and tear. Adjust the height from 22 inches to 32 inches in one-inch increments.
With its durable construction, Stevens' Science Classroom Table will provide years of dependable service in your lab. The rugged steel legs are attached with heavy-duty hardware, and adjustable leveling glides prevent wobbling. The easy-to-clean laminate apron is available in six different colors. Additionally, the work surface is available in your choice of laminate, phenolic resin or epoxy resin. Impact resistant edges prevent damage to the table's perimeter. Made in the U.S.A. Key Features Durable, easy-to-clean work surface Rugged steel legs with leveling glides Impact resistant edges Specifications Work surface material: Laminate, phenolic resin or epoxy resin Apron material: Particle board with laminiate finish Leg material: Steel with black powder-coat finish Length: 60" Width: 24" Height: 30" GREENGUARD certified Assembly required Warranty: Five years Selecting Countertops 1" Laminate is widely used for school science furniture. It offers an excellent work surface that wears exceptionally well under normal use. Plastic laminate has superior resistance to scratching, with limited resistance to high temperatures and severe chemicals like acid. Top construction consists of permanently bonding a sheet of high pressure laminate to an industrial grade particle board core. 3/4" Phenolic Resin is a composite thermo-fused under heat and pressure to form a chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. 3/4" Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel.
-- NSF Economy Work Table w 2" Back Spash -- 34"-35 1/2" Working Height -- Adjustable Galvanized Undershelf --18 Ga. 430 Stainless Top -- Galvanized Legs w adjustable plastic feet -- 1 Year Warranty
For safety and accuracy reasons, durable, wobble-free tables are a must in your science lab. Diversified Woodcrafts' Science Table answers the call with its sturdy solid legs and apron, adjustable leveling glides and your choice of surface material. Legs attach to the table at 13-gauge steel corner braces for the best results. Black rubber leg boots protect your table from scuffs and chemical spills. Choose from four top finishes to best fit your needs 1 1/4" ARP High-Pressure Plastic Laminate (good), 1 1/4" ChemGuard (better) and 1" Phenolic Resin (best) or 1" Solid Epoxy Resin. See a complete description of each surface type below the Specifications. This Diversified Woodcrafts Science Table is 24"W x 60"L x 30"H and comes backed by a limited lifetime warranty. Product Features: Choose from four surface materials (see descriptions below) Solid oak legs and apron 13-gauge steel corner braces Adjustable glides for accurate leveling Black rubber boots protect table legs Backed by a limited lifetime warranty Specifications: Top Material: Your choice of 1 1/4" ARP High-Pressure Plastic Laminate (good), 1 1/4" ChemGuard (better), 1" Phenolic Resin (best) or 1" Solid Epoxy Resin Leg/Apron Material: Solid oak Leg Size: 2 1/4" square Corner Braces: 13-gauge steel Width: 24" Length: 60" Height: 30" Warranty: Limited lifetime Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 4 different top surfaces to accommodate a variety of settings. GOOD 1 1/4" ARP High Pressure Plastic Laminate is widely used for student science tables. It offers an excellent work surface that wears exceptionally well under normal use. Plastic laminate has superior resistance to scratching, with limited resistance to high temperatures and severe chemicals. Top construction consists of permanently bonding a .050 thick sheet of ARP High Pressure Laminate to a 45 lb. density industrial grade particle board core, bottom is covered with a .040 thick brown phenolic backer sheet to properly balance the resulting panel, maximizing it's resistance to warping. Technical data: exceeds 1800 wear cycles and 66 inches impact resistance. Edges of top are finished with vandal resistant T-molding. Corners have 1-3/4" radius. Color, black. BETTER 1 1/4" ChemGuard incorporates the decorative features of high pressure laminate into a durable, chemical resistant surfacing material. Tests prove ChemGuard has outstanding chemical resistance, plus significantly better NEMA wear value than competitive laminates. ChemGuard even has a Class 1 fire rating. A 3mm PVC molding is applied with heat sensitive adhesive to create an attractive waterproof and durable edge. Color, black. BEST 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic
-- ANSI/NSF Standard 2 -- 35" - 36" Height -- Adjustable Galvanized Undershelf -- Galvanized Legs -- 2" Splash Guard --18 Ga. 430 Stainless Top
Flip Top Table features 0.75 Melamine Top and H-Frame Adjustable height from 21 to 29 in 1 increments Height adjusts with set screws and tamper resistant height changes (wrench included) Mobile table comes with 2 regular and 2 locking casters Top folds to less than 3.5 for compact storage Standard colors come with black frame and T-mold Versatile table perfect for seminar training or conference rooms 2 Year Limited Manufacturer Warranty Made in USA
-- 16 Ga. 300 Series Stainless Top with 2" Back Splash -- 35" - 36" Height -- Adjustable Galvanized Cross Bracing -- Galvanized Legs w Adjustable Plastic Feet -- NSF and 1 Year Warranty
Folding table, adjustable height 22 - 32, melamine top on 5/8 inch high density particle board core, 1 inch 18 gauge steel pedestal legs, 1-5/8 inch one piece steel apron, mar-proof plastic foot caps & edge molding, automatic lock-open mechanism, 24 x 60 inches, gray granite top with dove gray frame and dove gray t-mold. Contact customer service for additional color combinations. ( Correll - CFA2460M 15 )
-- 18 Ga. 430 Stainless Top -- 35" - 36" Height -- All Stainless Adjustable Stainless Cross Bracing -- Stainless Legs -- 2" Back Splash -- ANSI/NSF Standard 2