1 to 20 of about 11716 products for tool steel

Result for "tool steel"
Stanley® 12-In-1 Multi-Tool W/ Powerlock® Pocket Tape Measure

MULTI-TOOLS Stanley 12-In-1 Multi-Tool With Stanley 33-115 PowerLock Pocket Tape Rule Stanley package includes 12-in-1 Multi-Tool as well as Pocket Tape Rule. Stanley 33-115 PowerLock Pocket Tape Rule features a polymer-coated blade and chrome high-impact ABS case for lasting strength through years of use. Secure blade lock will not creep during measurements. Corrosion-resistant Tru-Zero end hook for accurate measurements. Tape blade is 10'L and 1/4"W. Stanley 12-in-1 Multi-Tool is made of stainless steel and includes pliers, wire cutter, saw, Philips screwdriver, standard screwdrivers, knives, bottle opener and file. Multi-tool includes nylon belt holster. MUST BE 18 YEARS OR OLDER TO PURCHASE THIS PRODUCT.

more >>
Global Industrial
$19.95 See It
Irwin® Vise-Grip® The Original Locking Sheet Metal Tool - 8r

IRWIN VISE-GRIP The Original Locking Sheet Metal Tool - 8R Features: Makes bending, forming, and crimping sheet metal jobs easierTurn screw to adjust pressure and fit work. Stays adjusted for repetitive useConstructed of high-grade heat-treated alloy steel for maximum toughness and durabilityClassic trigger release designed to provide maximum locking force 9.19 L. 2.81 W. 2.81 H.

more >>
Global Industrial
$14.95 See It
Stanley® 12-In-1 Multi-Tool W/ Holster

Stanley 84-519K 12-in-1 Multi-Tool Features: Stainless Steel ConstructionHigh Quality Nylon HolsterMUST BE 18 YEARS OR OLDER TO PURCHASE THIS PRODUCTIncludes: Long Nose PliersCurve Jaw PliersWire CutterSawPhillips ScrewdriverStandard Screwdrivers (1/4", 5/16", 1/8")Small KnifeLarge KnifeBottle OpenerFileMUST BE 18 YEARS OR OLDER TO PURCHASE THIS PRODUCT 8.50 L. 5.50 W. 2.50 H.

more >>
Global Industrial
$15.00 See It
Apollo 79-pc. Multi-Purpose Tool Kit

spend $25, get free shipping

Find hand tool sets at Target.com! These aren't just any tools. They're constructed from 45c carbon steel or chrome vanadium steel, heat-treated to resist corrosion. Tool handles are made from double-dipped plastics. All tools meet or exceed

more >>
Target
$35.99 See It
RIDGID RP 340-B Press Tool Kit with ProPress Jaws (1/2" - 1") 43353

RIDGID RP 340-B Press Tool Kit with ProPress Jaws (1/2" - 1") 30% smaller tool increases maneuverability.* 17% lighter tool reduces operator fatigue.* 31% longer service interval (up to 42,000 cycles) maximizes uptime.* More than 400 presses per charge (with Advanced Lithium 4 Battery). Ultimate flexibility with the ability to switch between battery and AC power on the same tool. * Versus RP 330-B Specifications: Capacity: 1/2" - 4 (Copper and Stainless Steel), 1/2" -2" (PEX) 270à ° Barrel/Jaw Swivel Hydraulic Ram Output: 7,200 lbs. (32kN) Weight: 8.5 lbs. (w/Battery), 9.5 lbs. (w/AC Power Adapter) Operating Temperature Range: 15à °F to 122à °F Approximate Cycle Time: 4 seconds LED-light For Continued Operations In No or Low-light Environments Longest service interval in the industry: 42,000 Cycles Compatible With All Standard Series Pressing Jaws and Attachments From RIDGID For Use With Copper and Stainless Steel Tubing, Steel Pipe, PEX and Cutting Soil Pipe. Battery Tool Kit Includes: RP 340 Press Tool, (2) 18V Advanced Lithium 2 Batteries, 120V Advanced Lithium Battery Charger, and Carrying Case

more >>
Ohio Power Tool
$2,673.92 See It
RIDGID RP 340-C Corded Press Tool Kit without ProPress Jaws 43363

RIDGID RP 340-C Corded Press Tool Kit Without ProPress Jaws 43363 30% smaller tool increases maneuverability.* 17% lighter tool reduces operator fatigue.* 31% longer service interval (up to 42,000 cycles) maximizes uptime.* More than 400 presses per charge (with Advanced Lithium 4 Battery). Ultimate flexibility with the ability to switch between battery and AC power on the same tool. * Versus RP 330-B Specifications: Capacity: 1/2" - 4 (Copper and Stainless Steel), 1/2" -2" (PEX) 270à ° Barrel/Jaw Swivel Hydraulic Ram Output: 7,200 lbs. (32kN) Weight: 8.5 lbs. (w/Battery), 9.5 lbs. (w/AC Power Adapter) Operating Temperature Range: 15à °F to 122à °F Approximate Cycle Time: 4 seconds LED-light For Continued Operations In No or Low-light Environments Longest service interval in the industry: 42,000 Cycles Compatible With All Standard Series Pressing Jaws and Attachments From RIDGID For Use With Copper and Stainless Steel Tubing, Steel Pipe, PEX and Cutting Soil Pipe. Corded Tool Kit Includes: RP 340 Press Tool, AC Power Adapter and Carrying Case

more >>
Ohio Power Tool
$2,077.14 See It
Chain & Rope Accessories: Lehigh Electrical Tools 18 in. Steel Swaging Tool (2-Pack) ST18OL

Free Shipping on Over 500K Items!

Shop for Tools & Hardware at The Home Depot. The Lehigh Steel Swaging Tool comes in a 2-pack and measures 1.25-inches by 6-inches by 20-inches. This product is constructed from steel for added durability and clamps 1/16-inch, 3/32-inch, 1/8-inch and

more >>
Home Depot
$39.93 See It
Air Cut-Off Tools: Powermate Air Powered Tools 3 in. Air Utility Cut-Off Tool 024-0089CT

Free Shipping on Over 500K Items!

Shop for Tools & Hardware at The Home Depot. The Powermate 3 in. high speed, high quality cut-off tool is designed to cut through steel, metal hangers, bolts, hose clamps, mufflers and other similar items, up to 3/4 in. thick. Equipped with a high

more >>
Home Depot
$29.99 See It
RIDGID RP 340-B Press Tool Kit with ProPress Jaws (1/2" - 2") 43358

RIDGID RP 340-B Press Tool Kit with ProPress Jaws (1/2" - 2") 43358 30% smaller tool increases maneuverability.* 17% lighter tool reduces operator fatigue.* 31% longer service interval (up to 42,000 cycles) maximizes uptime.* More than 400 presses per charge (with Advanced Lithium 4 Battery). Ultimate flexibility with the ability to switch between battery and AC power on the same tool. * Versus RP 330-B Specifications: Capacity: 1/2" - 4 (Copper and Stainless Steel), 1/2" -2" (PEX) 270à ° Barrel/Jaw Swivel Hydraulic Ram Output: 7,200 lbs. (32kN) Weight: 8.5 lbs. (w/Battery), 9.5 lbs. (w/AC Power Adapter) Operating Temperature Range: 15à °F to 122à °F Approximate Cycle Time: 4 seconds LED-light For Continued Operations In No or Low-light Environments Longest service interval in the industry: 42,000 Cycles Compatible With All Standard Series Pressing Jaws and Attachments From RIDGID For Use With Copper and Stainless Steel Tubing, Steel Pipe, PEX and Cutting Soil Pipe. Battery Tool Kit Includes: RP 340 Press Tool, (2) 18V Advanced Lithium 2 Batteries, 120V Advanced Lithium Battery Charger, and Carrying Case

more >>
Ohio Power Tool
$3,145.78 See It
RAP50315 Compact Flaring Tool -42%

Free Shipping on Orders Over $199

Raptor Tools, RAP50315, Flaring Tools, Hand Tools, Compact Flaring Tool, Features: Ductile iron core with hardened steel cone tip and sliding T-handle Self-centering yoke Capable of flaring 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 OD tubing

more >>
Build.com
$25.46 $14.75 See It
RIDGID RP 340-B Press Tool w/ No Jaws 43348

RIDGID RIDGID RP 340-B Press Tool w/ No Jaws 30% smaller tool increases maneuverability.* 17% lighter tool reduces operator fatigue.* 31% longer service interval (up to 42,000 cycles) maximizes uptime.* More than 400 presses per charge (with Advanced Lithium 4 Battery). Ultimate flexibility with the ability to switch between battery and AC power on the same tool. * Versus RP 330-B Specifications: Capacity: 1/2" - 4 (Copper and Stainless Steel), 1/2" -2" (PEX) 270à ° Barrel/Jaw Swivel Hydraulic Ram Output: 7,200 lbs. (32kN) Weight: 8.5 lbs. (w/Battery), 9.5 lbs. (w/AC Power Adapter) Operating Temperature Range: 15à °F to 122à °F Approximate Cycle Time: 4 seconds LED-light For Continued Operations In No or Low-light Environments Longest service interval in the industry: 42,000 Cycles Compatible With All Standard Series Pressing Jaws and Attachments From RIDGID For Use With Copper and Stainless Steel Tubing, Steel Pipe, PEX and Cutting Soil Pipe. Battery Tool Kit Includes: RP 340 Press Tool, (2) 18V Advanced Lithium 2 Batteries, 120V Advanced Lithium Battery Charger, and Carrying Case

more >>
Ohio Power Tool
$2,222.00 See It
308-Ar Barrel Extension Torque Tools - 308ar Barrel Extension Torque Tool

Handy tool aids in applying straight-line torque for fast, easy installation of the barrel nut without scratching the exterior of the upper receiver. Helps ensure the right amount of torque is evenly applied, while maintaining proper alignment of the barrel, upper receiver, and gas tube ports. Use with any barrel nut wrench or free-float tube wrench and a torque wrench with a ½" square drive. Simply clamp the barrel nut wrench handle firmly in a bench vise, insert the barrel into the upper receiver, and finger tighten the barrel nut. Slide the barrel through the wrench, insert the Torque Tool in the back of the receiver until the teeth lock into the locking lugs in the barrel Mfg: Brownells SPECS: Machined steel, black oxide finish. 9” (22.9cm) long, 1” (2.5cm) diameter. Requires a ½” square drive torque wrench. Instructions included. 308 AR version fits DPMS pattern 308 uppers and barrel extensions.

more >>
Brownells
$49.99 See It
Kennedy® 24" Professional Tool Box

Kennedy 24" Professional Tool Box Kennedy Transport your tools with ease using this portable tool box. Powder coat finished steel. Include lift-out tray and vinyl coated handles. Tray measures 23-1/2"W x 7-3/4"D x 3-3/8"H. Closes securely using chrome lift latches. 24-1/8"W x 8-5/8"D x 9-3/4"H overall. 25.00 L. 10.00 W. 9.00 H.

more >>
Global Industrial
$104.95 See It
Ar-15/M16 Barrel Extension Torque Tools - Ar-15/M16 Barrel Extension Torque Tool

Handy tool aids in applying straight-line torque for fast, easy installation of the barrel nut without scratching the exterior of the upper receiver. Helps ensure the right amount of torque is evenly applied, while maintaining proper alignment of the barrel, upper receiver, and gas tube ports. Use with any barrel nut wrench or free-float tube wrench and a torque wrench with a ½" square drive. Simply clamp the barrel nut wrench handle firmly in a bench vise, insert the barrel into the upper receiver, and finger tighten the barrel nut. Slide the barrel through the wrench, insert the Torque Tool in the back of the receiver until the teeth lock into the locking lugs in the barrel Mfg: Brownells SPECS: Machined steel, black oxide finish. 9” (22.9cm) long, 1” (2.5cm) diameter. Fits barrel extensions of AR-15/M16/M4 and clones chambered in .223/5.56mm only. Requires a ½” square drive torque wrench. Instructions included.

more >>
Brownells
$49.99 See It
Stanley® 55-120, Fatmax® Fubar® Iii, 30" Long

Stanley 55-120, FatMax FuBar III, 30" Long Forged, heat-treated one-piece steel construction for increased strength and durability. Textured bi-material grip panels are attached to handle on both sides. Heat-treated and tempered striking face with ripping hook and chamfered edges. Two tiered, serrated jaw for grabbing common dimensional lumber and decking. Nail slot on claw end with beveled edge for pulling nails and prying. 4-in-1 tool for prying, splitting, board bending, and striking jobs. Pentagonal shape below serrated jaw can be used as a fire hydrant wrench to turn on/off a fire hydrant. Slotted claw end can also be used as a gas valve wrench to turn gas valve on/off.MUST BE 18 YEARS OR OLDER TO PURCHASE THIS PRODUCT 32.00 L. 8.20 W. 2.20 H.

more >>
Global Industrial
$98.95 See It
Peterson Bending Tool

Our "U-Bend-it" TENSION TOOL BLANKS allow the locksmith to make a perfect tension tool in SECONDS. Many of these spring steel selections come with a Peterson Bending Tool, but if you already have a tool select a "refill" which comes without the tool. Keep in mind that the Peterson Steel is not like the common spring steel that breaks when you bend it. While the Peterson Steel is as strong and resistant to bending as the other steels, when you reach the bending point with Peterson Steel you are allowed to make the bend you desire. And our bending tool has a built in radius forming element that will assist you with any steel you may want to bend. The Peterson Bending Tool is made of thick slabs of hardened spring steel laser cut to perfection, de-burred to provide you with the tough hard working tool you deserve.Did you notice the hole in the end of the tool so that you can put it on your key chain? We have provided a wider version tension strip for you in the UBI - Assorted kit. Our panel of locksmiths advised us that this width is not only better for automotive work, but the width has not interfered with any other locks they have tried out with it. And yes they have tried the smaller key way locks. Locksmiths have a reputation for taking an existing tension wrench and adjusting it to meet their personal specifications. With our "U-Bend-it" kit series, the locksmith can make a special personalized tension wrench in minutes, to perfection, every time. Each of our tension wrench sets come with a Peterson Wrench Bending Tool. This special tool will allow the user to place a quality radius in each bend allowing our special steel to take the bend while maintaining the steel's strength and integrity.

more >>
Lockpickshop.com
$13.95 See It
Ruger® Mk I/Mk Ii Takedown Tool - Takedown Tool

Sort of like a Swiss Army knife, this small, self-contained, takedown tool has everything you need for field stripping your Ruger. Delrin®, tool body features an aluminum end cap with steel, wire loop for removing the mainspring housing latch. Punch on opposite end drives out the bolt stop pin without marring the metal. Unscrew end cap to expose the extractor removal pin. Use pin to remove the extractor, plunger and spring for cleaning or replacement. A must have for the Mark I /Mark II owner. Mfg: Gunsmither Tools SPECS: Body/Punch - Delrin®, black. Extractor Tool - Aluminum/steel. 3-7/8'''' (cm) OAL, ½'''' (1.3cm) diameter.

more >>
Brownells
$13.95 See It
General Tools 423-3c 4-1/8" Very Fine Swiss Pattern Tweezers

4-1/8" Very Fine Swiss Pattern Tweezers These high-quality, Swiss Pattern Tweezers were originally designed specifically for use in subminiature assembly. However, they have since become a favorite choice of craftsmen, jewelers and others looking for a light-tensioned, highly precise tweezer. The stainless steel bodies feature hardened precision points available in two distinct styles. Very fine point style4-1/8" overall lengthFine quality for the most exacting professionsLight tensioned for handling delicate objectsUsed in subminiature assembly, jewelry repair, tool making and model buildingStainless steel construction with hardened points 6.00 L. 2.00 W. 0.10 H.

more >>
Global Industrial
$10.75 See It
Greenlee® 0153-43c Multi-Tool 9n1 Driver

Greenlee 0153-43C Multi-Tool 9N1 Driver Features: Versatile multi-bit screwdriver, 9 tools in oneDrive hex nuts, Phillips, Square-recess and slotted fastenersHigh-grade, rust resistant, chrome-plated finishPrecision machined, hardened steel bitsSoft, cushioned grip for extra comfort and torqueLifetime limited warrantyNote: This is not an insulated tool 12.00 L. 3.90 W. 1.50 H.

more >>
Global Industrial
$15.50 See It
Power Tool Holders For Perfo Panels - 1-1/2" Dia.

BOTT Power Tool Holders for Perfo Panels are zinc plated for durability. Lock onto panels and will not come out when tools are removed. For use with steel toolboards. Clips necessary for securing accessories are included with each item. Appropriate for lean manufacturing.

more >>
C&H Distributors
$18.70 See It
Search within results