1 to 10 of  10 products for transfer case encoder motor blazer jimmy s10 s15 sonoma

No exact matches found for transfer case encoder motor blazer jimmy s10 s15 sonoma

10 similar items found

KIT HS351024NV Encoder,For Black Max,525vdc,1024ppr,IP67

$50+ Orders Ship Free

Encoder Kit, For Use with Black Max Motors, RPM Range 0 to 2X Motor Base RPM, 5 to 26 VDC, 100mA, Resolution 1024 PPR, Hollow Shaft Mounting, IP67 Enclosure, Enclosure Material Cast Aluminum, Max Ambient Temperature 100 C, Wire Termination 10 Pin MS Connector, Diameter 4-1/2 In, Overall Length...

more >>
Zoro
$1,059.60 See It
1842S-3 1 1/2" Header Shorty Stainless Steel 96-01 Blazer/Jimmy/S-10 4 Wheel Drive 4.3L

JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifolProduct Features:JBA Performance Exhaust 1842S-3 1 1/2" Header Shorty Stainless Steel 96-01 Blazer/Jimmy/S-10 4 Wheel Drive 4.3LMandrel bent stainless steel tube. Most Exhaust Headers products are available for in-store pickup from Advance Auto Parts.

more >>
Advance Auto Parts
$511.99 See It
(AMD) 1982 - 93 Blazer, S10, S15 Hood

OEM-quality Replacement Sheet Metal takes a major hassle out of your muscle car restoration project.Save the time and effort you'd otherwise expend repairing or searching for replacements for damaged or rusted-out sheet metal. This hood (300-4182-2) for your 1982 to 1993 Chevrolet or GMC includes all the correct-as-original, ?anges, bends and seams. Attention to detail means your sheet metal parts will fit properly, with just minimal trimming or fabrication. These parts have OEM-style design, smoother surfaces and edges as compared to other reproductions. Also, all parts are EDP-coated for corrosion resistant and easier painting. Vehicle-specific sheet metal matches original factory stampings for: Blazer S10 S15

more >>
Eastwood.com
$496.99 See It
AMD 94-04 Chevy S10 Pickup GMC Sonoma / 95-04 Chevy S10 Blazer S15 Jimmy Ram Air Style Hood (Part# 300-4194-3)

Auto Metal Direct (AMD) hoods are designed to be a direct bolt-on replacement to your vehicles stock hood. All applications utilize your vehicles stock hinge and latch assemblies. Each hood features a fully finished, factory style, underside. This hood arrives in a black EDP coat finish. This is not a primer. This is a sealer put on the hood to protect against rust. All AMD hoods require normal prep work (test fit, sand, prime) before paint can be applied. We strongly recommend having a qualified auto body shop paint and install this hood.

more >>
Amazon
$349.95 See It
SW Truck Intake Kit 96-03 Chevrolet Blazer / Jimmy / S10 / S15 / Sonoma 4.3L ( With Air Shield )

SECRET WEAPON INTAKE SYSTEMS-Polished dual velocity intake Gunmetal / Black foam filter. The Secret Weapon Intake was designed to increase air intake volume to the engine. The concept is to create two different air velocity profiles one traveling at higher speeds than the other. This technology increases air volume and speed to the engine which naturally feeds the engine 3x more air than the conventional air intake system. The intake pipe is bent out of high quality 6061 Aluminum on our Automated CNC mandrel bender. Polished to a high show quality finish. The SW1 Air filter features a tuned velocity stack to increase velocity and decrease turbulence. Only Comes In Polished. 1 Million Mile Limited Warranty Open pore high density re-usable foam Over 250 applications for Car's / Trucks / SUV's.

more >>
Amazon
$282.50 See It
19125640 OE Service Transfer Case Four Wheel Drive (4WD) Actuator Assembly

You're looking at an OEM Transfer Case Actuator/Encoder Motor. Please be sure to verify that this fits your car. All parts fit multiple cars with different options. It's important to verify the fitment to make sure you get the exact part you need. If you have any questions please feel free to ask us before buying. We're here to make sure you get exactly what you need! Please verify fitment options. This item fits the following cars listed below: 2003-2007 Chevy/GM Trucks w/ 2-Speed Push Button. Please ensure same part number.

more >>
Amazon
$285.00 See It
OE Factory GM 12474401 Transfer Case Encoder/Actuator Shift Motor

Brand New Factory GM Transfer Case Shift Actuator/Encoder MotorFits 1999-2005 Trucks w/NP8 RPO CodeRPO(Regular Production Option) Code can be found on the inside back of the glove box door. Check for NP8 on on the factory sticker or call you local GM dealer to verify this part number (12474401) is correct for your specific vehicle.You can also identify this motor by looking at the plug, This motor will have a wiring harness coming out of the motor with a pin connector.Part #: 12474401

more >>
Amazon
$389.00 See It
Custom-Fit Receiver Hitch - For Chevrolet S-10 Blazer; GMC S-15 Jimmy;

Now you can order a receiver hitch custom-made for your truck, van or SUV from Reese, the #1 brand name in hitches 1-pc. welded, easy-to-install design. Distinctive, patented collar and plug. Many applications are no-drill for fast and easy

more >>
Northern Tool
$189.99 See It
600-120 Transfer Case Encoder Ring

Buy Dorman 600-120 Transfer Case Encoder Ring. Visit AutoPartsWAY.com to find the specific Transfer Case Encoder Ring for your vehicle.

more >>
AutoPartsWAY
$58.37 See It
(AMD) 1982 - 93 Blazer, S10, S15 Hood

OEM-quality Replacement Sheet Metal takes a major hassle out of your muscle car restoration project.Save the time and effort you'd otherwise expend repairing or searching for replacements for damaged or rusted-out sheet metal. This hood (300-4182-4) for your 1982 to 1993 Chevrolet or GMC includes all the correct-as-original, ?anges, bends and seams. Attention to detail means your sheet metal parts will fit properly, with just minimal trimming or fabrication. These parts have OEM-style design, smoother surfaces and edges as compared to other reproductions. Also, all parts are EDP-coated for corrosion resistant and easier painting. Vehicle-specific sheet metal matches original factory stampings for: Blazer S10 S15

more >>
Eastwood.com
$496.99 See It
Search within results
  • Find by Price
    • $ to $