1 to 20 of  36 products for tv audio amplifier

Result for "tv audio amplifier"
619-N Wall plate - Recessed Low Voltage Cable Wall Plate WITH Recessed Power - Black

Recessed Low Voltage Cable Wall Plate WITH Recessed Power - White Use this nice looking, recessed low voltage cable plate with recessed power to install power and low voltage cables behind your flat panel TV, your amplifier or other audio and video devices. The recessed low voltage cable plate with recessed power can be installed upright or upside down and will clean up the look of your entertainment center. You can install this plate right over an existing outlet. Just remove the existing outlet and install this one in it's place. You'll cut the drywall next to it to allow for the cable side of this plate. This is a two gang box, but it will install over a one gang outlet, and is designed for the drywall next to the existing outlet to be cut out. This box is designed so that you cannot see back into the wall. You will not see insulation or drywall through the cable hole opening. Comes in retail ready packaging. Specifications: Cables will pass through the conduit/hole opening on plate face. 4-5 thick HDMI cables will fit through the opening. The opening is 1-5/16" width x 1-15/16" High. Overall dimensions: 5 1/4" w X 4 1/2" h X 2 3/4" d Screw colors match box color. Comes with all screws and a install manual. Power receptacle is grounded and made by Cooper continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item recieved may not match photo or specs shown.

more >>
MeoEstore
$14.08 See It
621-N Wall Plate - Recessed Easy Mount Low Voltage Cable - Ivory

Wall Plate - Recessed Easy Mount Low Voltage Cable - Ivory Use the Easy Mount Recessed Low Voltage Cable Plate to install low voltage cables behind your flat panel TV, your amplifier or other audio and video devices. The wall plate can be installed upright or upside down. This plate's innovative "mounting wings" eliminate the need for a low voltage mounting bracket. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall. The standard Easy Mount Cable Plate has the capacity of a double gang plate-in a single gang profile. The wall plate can be installed upright or upside down. The new, thinner profile of the Easy Mount Cable Plate is designed to fit behind the industry's thinnest mounts and flat panel TVs. Item # 624-N and 625-N Total dimensions: 4.9" (L) x 3.25" (W) x 2.25" (D) Cable passthrough dimensions: 2.5" (L) x 1.5" (W) x 2.25" (D) Maximum wall thickness for installation: 1 inch Minimum wall thickness for installation: .25 inch

more >>
MeoEstore
$2.78 See It
Antennas Direct 8 Way TV / Catv Distribution Amplifier

Audio/Video Distribution Amplifier - Limited Warranty: Lifetime - Frequency Range: 54 MHz to 1000 MHz

more >>
Sears
$59.99 See It
620-N Wall Plate - Recessed Easy Mount Low Voltage Cable - Black

Wall Plate - Recessed Easy Mount Low Voltage Cable - Black Use the Easy Mount Recessed Low Voltage Cable Plate to install low voltage cables behind your flat panel TV, your amplifier or other audio and video devices. The wall plate can be installed upright or upside down. This plate's innovative "mounting wings" eliminate the need for a low voltage mounting bracket. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall. The standard Easy Mount Cable Plate has the capacity of a double gang plate-in a single gang profile. The wall plate can be installed upright or upside down. The new, thinner profile of the Easy Mount Cable Plate is designed to fit behind the industry's thinnest mounts and flat panel TVs. Item # 624-N and 625-N Total dimensions: 4.9" (L) x 3.25" (W) x 2.25" (D) Cable passthrough dimensions: 2.5" (L) x 1.5" (W) x 2.25" (D) Maximum wall thickness for installation: 1 inch Minimum wall thickness for installation: .25 inch

more >>
MeoEstore
$2.78 See It
522-N Wall plate - Recessed Low Voltage Cable Wall Plate WITH Recessed Power - Gray

Recessed Low Voltage Cable Wall Plate WITH Recessed Power - Gray Use this nice looking, recessed low voltage cable plate with recessed power to install power and low voltage cables behind your flat panel TV, your amplifier or other audio and video devices. The recessed low voltage cable plate with recessed power can be installed upright or upside down and will clean up the look of your entertainment center. You can install this plate right over an existing outlet. Just remove the existing outlet and install this one in it's place. You'll cut the drywall next to it to allow for the cable side of this plate. This is a two gang box, but it will install over a one gang outlet, and is designed for the drywall next to the existing outlet to be cut out. This box is designed so that you cannot see back into the wall. You will not see insulation or drywall through the cable hole opening. Comes in retail ready packaging. Specifications: Cables will pass through the conduit/hole opening on plate face. 4-5 thick HDMI cables will fit through the opening. The opening is 1-5/16" width x 1-15/16" High. Screw colors match box color. Comes with all screws and a install manual. Power receptacle is grounded and made by Cooper continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item recieved may not match photo or specs shown.

more >>
MeoEstore
$14.08 See It
622-N Wall Plate - Recessed Easy Mount Low Voltage Cable - Lite Almond

Wall Plate - Recessed Easy Mount Low Voltage Cable - Lite Almond Use the Easy Mount Recessed Low Voltage Cable Plate to install low voltage cables behind your flat panel TV, your amplifier or other audio and video devices. The wall plate can be installed upright or upside down. This plate's innovative "mounting wings" eliminate the need for a low voltage mounting bracket. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall. The standard Easy Mount Cable Plate has the capacity of a double gang plate-in a single gang profile. The wall plate can be installed upright or upside down. The new, thinner profile of the Easy Mount Cable Plate is designed to fit behind the industry's thinnest mounts and flat panel TVs. Item # 624-N and 625-N Total dimensions: 4.9" (L) x 3.25" (W) x 2.25" (D) Cable passthrough dimensions: 2.5" (L) x 1.5" (W) x 2.25" (D) Maximum wall thickness for installation: 1 inch Minimum wall thickness for installation: .25 inch

more >>
MeoEstore
$2.78 See It
Antennas Direct 4 Way TV / Catv Distribution Amplifier

Signal Splitter/Amplifier - Limited Warranty: Lifetime - Ports: 4 x 4-way - Audio/Video Out - Frequency Range: 54 MHz to 1000 MHz

more >>
Sears
$49.99 See It
525-N Wall plate - Recessed Media Box White

Recessed Media Box White Use The Recessed Media Box to install power and low voltage cables from behind your flat panel TV, your amplifier or other audio and video devices to your equipment room or use in your equipment room to organize your incoming audio and video cables. This box is designed for new construction or retrofit installations. The 4-gang flexible cover plate gives the box the clean, finished look customers expect. Available with either a white or black cover plate. Specifications: Box inner dimensions: 3 13/16" x 5" x 7" Contents: Recessed Media Box Wall Plate Wall Plate Screws (4) Retrofit Mounting Tabs (4) Retrofit MountingWings with Screws (4) Black Foam Tape #6 Wood Screws (2) Small Threaded Screws (4) Screwdriver continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item recieved may not match photo or specs shown.

more >>
MeoEstore
$18.34 See It
524-N Wall plate - Recessed Media Box Black

Recessed Media Box Black Use The Recessed Media Box to install power and low voltage cables from behind your flat panel TV, your amplifier or other audio and video devices to your equipment room or use in your equipment room to organize your incoming audio and video cables. This box is designed for new construction or retrofit installations. The 4-gang flexible cover plate gives the box the clean, finished look customers expect. Available with either a white or black cover plate. Specifications: Box inner dimensions: 3 13/16" x 5" x 7" Contents: Recessed Media Box Wall Plate Wall Plate Screws (4) Retrofit Mounting Tabs (4) Retrofit MountingWings with Screws (4) Black Foam Tape #6 Wood Screws (2) Small Threaded Screws (4) Screwdriver continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item recieved may not match photo or specs shown.

more >>
MeoEstore
$18.34 See It
2SC2229

TRANSISTOR (BLACK AND WHITE TV VIDEO OUTPUT, HIGH VOLTAHE SWITCHING, DRIVER STAGE AUDIO AMPLIFIER APPLICATIONS)

more >>
Utsource
$1.00 See It
2SA1964

For Audio Amplifier Output Stages/TV V£å£ì£ï£ã£é£ô£ù¡¡£Í£ï£ä£õ£ì£á£ô£é£ï£î£¯

Utsource
$1.00 See It
LA42102

Monolithic Linear IC Audio Output for TV application 10W ¡¿ 2ch Power Amplifier

Utsource
$2.00 See It
LA42152

Monolithic Linear IC Audio Output for TV application 15W ¡¿ 2ch Power Amplifier

Utsource
$3.50 See It
LA42205

Monolithic Linear IC Audio Output for TV application 5W ¡¿ 2ch Power Amplifier

Utsource
$5.00 See It
8 Outlet Aerial Signal Amplifier with Digital Bypass

Special order product normally dispatched in 2 Working Days 8 way aerial amplifier designed to boost the signal received by the aerial for distribution to TV or radio sets. The product will work with Digital Terrestrial, DAB and VHF signals. The product features Coax inputs, 8 x Coaxial outputs, DC bypass (for use with satellite receivers) and a 1.2 m mains lead. Colour Black Dimensions (mm) 273x89x48 Weight (kg) 0.684 Power Input 230 V AC @ 50 Hz Impedance(Ohms) 75 Gain (dB) 12-15 Bandwidth 47-230 & 470-860 MHz LVD Standard EN60065 EMC Standard EN55103 Product Dimensions (HxWxD cm) 27.3x8.9x4.8 For Use with Digital Terrestrial, DAB, VHF and most Satellite receivers, VHF & FM Signals Ideal for Both Home and Business Applications DC Bypass Another Quality Product supplied by T2

more >>
Fruugo
$36.14 See It
4 Outlet Aerial Signal Amplifier with Digital Bypass and ...

4-way aerial amplifier designed to boost the signal received by the aerial for distribution to TV or radio sets. The product will work with Digital Terrestrial, DAB and VHF signals. The product features F input, 4 x F outputs, Digital Bypass (for use with magic eye or similar systems) and 1.2 m mains lead. Colour Black Dimensions (mm) 171.5x85.5x44 Weight (kg) 0.524 Power Input 230 V AC @ 50 Hz Impedance (Ohms) 75 Gain (dB) 9-12 Bandwidth 47-230 & 470-860 MHz LVD Standard EN60065 EMC Standard EN55103 Net weight (kg) 0.524 Product Dimensions (HxWxD cm) 17.15x8.55x4.4 For Use with Digital Terrestrial, DAB, VHF and most Satellite receivers, VHF & FM Signals Ideal for Both Home and Business Applications Digital Bypass Another Quality Product supplied by T2

more >>
Fruugo
$22.39 See It
Platinum 4 Outlet Aerial Signal Amplifier with Digital By ...

Professional 4 way aerial amplifier from our new PLATINUM range, designed to boost the signal received by the aerial or satellite receiver for distribution to TV or radio sets. The product will work with Digital Terrestrial, most satellite receivers, DAB and VHF signals. Features 2 x F connector input sockets, 4 x F connector outputs, Full Output (allows the unit to be slaved), Digital Bypass (for use with magic eye and similar systems), key slot mounting holes, power on LED, surge protection, short protection and 1.2 m mains lead. Colour Piano Black Dimensions (mm) 265x85x50 Weight (kg) 0.4 Power Input 230 V AC @ 50 Hz Impedance (Ohms) 75 Gain (dB) 10 Output & 20 Full Output Bandwidth 47-230 & 470-862 MHz Type 4 Outlet Connectors F Type LVD Standard EN60065 EMC Standard EN55103 For Use with Digital Terrestrial, DAB, VHF and most Satellite receivers, VHF & FM Signals Ideal for Both Home and Business Applications Key Slot Mounting Holes Another Quality Product from Electrovision

more >>
Fruugo
$32.18 See It
Platinum 6 Outlet Aerial Signal Amplifier with Digital By ...

Professional 6 way aerial amplifier from our new PLATINUM range, designed to boost the signal received by the aerial or satellite receiver for distribution to TV or radio sets. The product will work with Digital Terrestrial, most satellite receivers, DAB and VHF signals. The product features 2 x F Type connector input sockets, 4, 6 or 8 connector outputs, Full Output (allows the unit to be slaved), Digital Bypass (for use with magic eye and similar systems), key slot mounting holes, power on LED, surge protection, short protection and 1.2 m mains lead. Colour Piano Black Dimensions (mm) 265x85x50 Weight (kg) 0.64 Power Input 230 V AC at 50 Hz Impedance (Ohms) 75 Gain (dB) 10/Output & 20/Full Output Bandwidth 47-230 & 470-862 MHz LVD Standard EN60065 EMC Standard EN5 For Use with Digital Terrestrial, DAB, VHF and most Satellite receivers, VHF & FM Signals Ideal for Both Home and Business Applications Digital Bypass Another Quality Product from Electrovision

more >>
Fruugo
$36.50 See It
Platinum 6 way Aerial Signal Amplifier with Digital Bypass

Professional 6 way aerial amplifier from our new PLATINUM range, designed to boost the signal received by the aerial for distribution to TV or radio sets. The product will work with Digital Terrestrial, DAB and VHF signals. The product features 2 coax inputs, 4, 6 or 8 coaxial outputs, Digital Bypass (for use with magic eye and similar systems), key slot mounting holes, power on LED, surge protection, short protection and 1.2 m mains lead. Colour Piano Black Dimensions (mm) 220x70x45 Weight (kg) 0.5 Power Input 230 V AC @ 50 Hz Impedance (Ohms) 75 Gain (dB) 10 Bandwidth 47-230 & 470-862 MHz LVD Standard EN60065 EMC Standard EN55103 For Use with Digital Terrestrial, DAB, VHF and most Satellite receivers, VHF & FM Signals Ideal for Both Home and Business Applications Key Slot Mounting Holes Another Quality Product from Electrovision

more >>
Fruugo
$36.43 See It
Platinum 8 Outlet Aerial Signal Amplifier with Digital Bypass

Professional 8 way aerial amplifier from our new PLATINUM range, designed to boost the signal received by the aerial for distribution to TV or radio sets. The product will work with Digital Terrestrial, DAB and VHF signals. The product features 2 coax inputs, 4, 6 or 8 coaxial outputs, Digital Bypass (for use with magic eye and similar systems), key slot mounting holes, power on LED, surge protection, short protection and 1.2 m mains lead. Colour Piano Black Dimensions (mm) 220x70x45 Power Input 230 V AC @ 50 Hz Impedance (Ohms) 75 Gain (dB) 10 Bandwidth 47-230 & 470-862 MHz LVD Standard EN60065 EMC Standard EN55103 For Use with Digital Terrestrial, DAB, VHF and most Satellite receivers, VHF & FM Signals Ideal for Both Home and Business Applications Key Slot Mounting Holes Another Quality Product from Electrovision

more >>
Fruugo
$43.76 See It
Search within results