1 to 12 of  12 products for universal water heater element

Result for "universal water heater element"
Water Heating Control - 10k Capacity, 3/8" Inlet Pipe

The Robertshaw 110 and 220 Series gas water heater valves were first manufactured for the O.E.M. market in 1955. For the last 50 years, the 110 series has been the definitive gas water heater valve. Over the years, minor product improvements were incorporated, but the valves have remained basically the same. In 1995, Robertshaw introduced the new 220R Series gas water heater valve. The new 220R Series will mount and operate in the same manner as the original 110 Series. The 220R features simplified pilot lighting and easy-to-adjust gas pressure regulator. The 110 Series Water Heater Thermostat Uni-Kit and Commercial Water Heater Thermostat Uni-Kits were designed for universal replacement applications. All models feature built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. If an ECO has detected an over-temperature condition and has opened, the control will not function and a new replacement will be required. All domestic and RV models have a 160 F temperature high stop. All commercial models have a 180 F temperature high stop. All models have a 5-1/2" sensing element and vary by inlet and outlet size, shank length, regulator type and setting. 9.25 L. 6.00 W. 5.00 H.

more >>
Global Industrial
$176.95 See It
Universal 5.5kw Titanium Spa Heater Element 25-4034BI-TI

Universal 5.5kw Titanium Heater Element 120/240v with epoxy potted bulkheads. This is a double bend flow thru titanium heater element. It has a titanium coating to prolong the life of the element and gives you superior resistance against corrosion, damage against hard water & chemicals. It measures 1.25 inches from terminal end to terminal end, overall length is 10.0 inches. It is 5.5kw when using 240v and 1.4kw when using 120v. The front of the element bends slightly downward near the end terminal. This is designed to fit a large number of heaters including the Balboa M7 heaters. All hardware and o-rings required for installation are included. Includes a 1 year manufacturers limited warranty free of defects. Note: We advise all hot tub owners to have their water tested bi-weekly, to help insure an even longer life for your spa component. Can replace part numbers; 25-4041BI, 254041, 6-FLO, 6-FLO-TE, 6-FLO-TI, 6-FLO-ET, 2-05-0025, 624552, 9135-32F, 25-4034NH, 70-20665, 9135-38A, 70-20655-TE, 9135-38A, 7020638TE, 9135-38, 254041ETBI.

more >>
BW SPA PARTS
$68.94 See It
Heater Element 5x5 Plate 5.5/1.375KW - 120/240V- BX5002

Our 5 x 5 flange plate replacement heater element is made in USA and designed for optimum heat to water transfer. Universal voltage: 5.5 KW @ 240V or 1.375KW @ 120V. For Brett Aqualine, HydroQuip, Premier, CRL, Vita Spa and others using 5x5 plate heater manifolds.

more >>
The Spa Depot
$49.95 See It
Water Heating Control - 38k Capacity, 1/2" Inlet Pipe

The Robertshaw 110 and 220 Series gas water heater valves were first manufactured for the O.E.M. market in 1955. For the last 50 years, the 110 series has been the definitive gas water heater valve. Over the years, minor product improvements were incorporated, but the valves have remained basically the same. In 1995, Robertshaw introduced the new 220R Series gas water heater valve. The new 220R Series will mount and operate in the same manner as the original 110 Series. The 220R features simplified pilot lighting and easy-to-adjust gas pressure regulator. The 110 Series Water Heater Thermostat Uni-Kit and Commercial Water Heater Thermostat Uni-Kits were designed for universal replacement applications. All models feature built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. If an ECO has detected an over-temperature condition and has opened, the control will not function and a new replacement will be required. All domestic and RV models have a 160 F temperature high stop. All commercial models have a 180 F temperature high stop. All models have a 5-1/2" sensing element and vary by inlet and outlet size, shank length, regulator type and setting.Made in the USA. 14.50 L. 9.50 W. 6.00 H.

more >>
Global Industrial
$222.95 See It
Water Heating Control - 45k Capacity, 1/2" Inlet Pipe, 4.0" W.C Nat. Gas Reg.

The Robertshaw 110 and 220 Series gas water heater valves were first manufactured for the O.E.M. market in 1955. For the last 50 years, the 110 series has been the definitive gas water heater valve. Over the years, minor product improvements were incorporated, but the valves have remained basically the same. In 1995, Robertshaw introduced the new 220R Series gas water heater valve. The new 220R Series will mount and operate in the same manner as the original 110 Series. The 220R features simplified pilot lighting and easy-to-adjust gas pressure regulator. The 110 Series Water Heater Thermostat Uni-Kit and Commercial Water Heater Thermostat Uni-Kits were designed for universal replacement applications. All models feature built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. If an ECO has detected an over-temperature condition and has opened, the control will not function and a new replacement will be required. All domestic and RV models have a 160 F temperature high stop. All commercial models have a 180 F temperature high stop. All models have a 5-1/2" sensing element and vary by inlet and outlet size, shank length, regulator type and setting. 9.25 L. 6.00 W. 5.00 H.

more >>
Global Industrial
$67.94 See It
Water Heating Control - 38k Capacity, 1/2" Inlet Pipe, 1/2" Inverted Flare

The new 220RLP Series will mount and operate in the same manner as the original 110 Series. The 220RLP features simplified pilot lighting and easy-to-adjust gas pressure regulator. The 220 Series Water Heater Uni-Kits are designed for universal replacement applications. All models feature built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. If an ECO has detected an over-temperature condition and has opened, the control will not function and a new replacement will be required. All domestic models have a 160 F temperature high stop. All commercial models have a 180 F temperature high stop. All models have a 5-1/2" sensing element and vary by shank length. BTU Capacity: 1/2" x 1/2" models - 100,000 BTU/LP; 1/2" x 3/8" models - 85,000 BTU/LP. Replacement safety magnets not available. Made in the USA. 9.25 L. 6.00 W. 5.00 H.

more >>
Global Industrial
$232.95 See It
Universal 4kw Tefel Spa Heater Element 25-4041ET-BI

Universal 4kw Tefel Coated Heater Element 120/240v. This is a double bend flo-thru Tefel coated heater element with standard bulkheads. It has a Tefel coating to prolong the life of the element and gives you superior resistance against corrosion, damage against hard water & chemicals. It measures 1.25 inches from terminal end to terminal end, overall length is 10.0 inches. It is 4kw when using 240v and 1kw when using 120v. The front of the element bends slightly downward near the end terminal. This is designed to fit a large number of heaters including the Balboa M7 heaters. All hardware and o-rings required for installation are included. Includes a 1 year manufacturers limited warranty free of defects. Note: We advise all hot tub owners to have their water tested bi-weekly, to help insure an even longer life for your spa component. Can replace part numbers; 25-4041BI, 254041, 6-FLO, 6-FLO-TE, 6-FLO-TI, 6-FLO-ET, 2-05-0025, 624552, 9135-32F, 25-4034NH, 70-20665, 9135-38A, 70-20655-TE, 9135-38A, 7020638TE, 9135-38, 254041ETBI.

more >>
BW SPA PARTS
$69.94 See It
Universal 4kw Titanium Spa Heater Element 25-4041BI-TEP

Universal 4kw Titanium Heater Element 120/240v with epoxy potted bulkheads. This is a double bend flow thru titanium heater element. It has a titanium coating to prolong the life of the element and gives you superior resistance against corrosion, damage against hard water & chemicals. It measures 1.25 inches from terminal end to terminal end, overall length is 10.0 inches. It is 4kw when using 240v and 1kw when using 120v. The front of the element bends slightly downward near the end terminal.This is designed to fit a large number of heaters including the Balboa M7 heaters. All hardware and o-rings required for installation are included.Includes a 1 year manufacturers limited warranty free of defects.Note: We advise all hot tub owners to have their water tested bi-weekly, to help insure an even longer life for your spa component.Can replace part numbers; 25-4041BI, 254041, 6-FLO, 6-FLO-TE, 6-FLO-TI, 6-FLO-ET, 2-05-0025, 624552, 9135-32F, 25-4034NH, 70-20665, 9135-38A, 70-20655-TE, 9135-38A, 7020638TE, 9135-38, 254041ETBI.

more >>
BW SPA PARTS
$69.94 See It
Universal Spa Heater Element Flo-Thru 4.0kw 120/240v 25-4041BI

Universal Replacement 4kw Heater Element will fit Balboa M7 Heater Assemblies  This heater element is extremely versatile and will fit 99% of the Major Brand Flo-thru heater assemblies including the proprietary Balboa M7 dual sensor technology. It can also be used as a replacement in other heaters with or without thermowells. It measures 1.25" from terminal end to terminal end and the overall length is 10.0". It is 4kw when using 240v and will work in 120 volt applications. All hardware & o-rings required for installation are included. Includes 1 year manufacturers warranty (free of defects). We recommend adding a new pair of o-ring gaskets for a leak free repair! Just some major brands that this element will fit: Advanced Spa, Balboa, Brett Aqualine, Cal Spas, Coleman, Freeflow, Gecko, Gulf Coast, Hydroquip, Jacuzzi, LA Spas, Leisure Bay and many more. . .   Common part #'s that this element can replace: 25-4041, 25-4041-BI, 25-4041-TI, 25-4041NH, 6-FLO, 6-FLO-TE, 6-FLO-ET, 70-20638-TE, 9135-38, 624409C, 624402, 624408, HTR7020638, 70-20242, 70-20638. Note: We advise all hot tub owners to have their water tested bi-weekly, to help insure an even longer life for your spa component.

more >>
BW SPA PARTS
$49.95 See It
Universal Spa Flo-Thru Heater Element 5.5kW 120/240 Volts

Universal Replacement Heater Element 5.5kw (will fit Balboa M7)This heater element is extremely versatile and will fit 99% of the Major Brand Flo-thru heater assemblies including the proprietary Balboa M7 dual sensor technology. It can also be used as a replacement in other heater with or without thermowells. It measures 1.25" from terminal end to terminal end. Overall length is 10.0". It is 5.5kw when using 240v & 1.375kw when using 120v. All hardware & o-rings required for installation are included. We recommend adding a new pair of o-ring gaskets for a leak free repair.  Will Replace Part#'s; 25-4034BI, 254034, 6-FLO, 6-FLO-TE,  6-FLO-TI, 6-FLO-ET, 2-05-0025, 624552, 9135-32F, 25-4034NH, 70-20665, 9135-38A, 70-20655-TE, 9135-38A   Note: We advise all hot tub owners to have their water tested bi-weekly, to help insure an even longer life for your spa component. 

more >>
BW SPA PARTS
$49.95 See It
Universal Flo-Thru Spa Heater Element 5.5kw 120/240v Teflon Coated

Universal Replacement 5.5kw Heater Element Teflon Coated (will fit Balboa M7) This universal teflon coated hot tub heater element is extremely versatile and will fit 99% of the Major Brands of flo-thru assemblies including the proprietary Balboa M7 dual sensor technology.It can also be used as a replacement inmost heaters with or without thermowells.It measures 1.25" from terminal end to terminal end and has a dropped end to clear the sensor or pressure switch. Overall length is 10.0". It is 5.5kw when using 240v & 1.375kw when using 120v. All hardware & o-rings required for installation are included. What "Teflon Coating" means? The high technology performance of Teflon industrial coatings makes them the natural choice in this industry. Teflon coating is used to ensure the ideal combination of properties for chemical resistance, corrosion/abrasion resistance & calcification.To simplify this; this special coating is to help prolong the life of your heater element. It is another barrier to help prevent chemical abuse (high/low ph levels), along with hard water (where water softeners are used) and homes with well water. Just some major brands that this element will fit: Advanced Spa, Balboa, Brett Aqualine, Cal Spas, Coleman, Freeflow, Gecko, Gulf Coast, Hydroquip, Jacuzzi, LA Spas, LeisureBay, Master Spas, Spa Builders, Sundance, Therm Products, Thermo Spas, and many more. . . Will replace part#: 25-4034-BI, 25-4034-BI-TI, 25-4034BI, 6-FLO, 6-FLO-TE, 6-FLO-ET, 2-05-0025, 624552, 9135-32F, 25-4034NH, 70-20665, 9135-38A, 70-20655-TE, 9135-38A Note: We advise all hot tub owners to have their water tested bi-weekly, to help insure an even longer life for your spa component.

more >>
BW SPA PARTS
$63.95 See It
Universal Spa Heater Element 4kW Flo-Thru 120/240 Volts

Flo-Thru 4kw Spa Heater Element 120/240vThis is a double bend flow thru heater element. It measures 1.25" from terminal end to terminal end, overall length is 11.0". This element will fit most flow thru 6-Flo heater assemblies. All hardware & o-rings required for installation are included. This heater element will not fit a Balboa heater assembly. Includes 1 year manufacture's warranty (free of defects). Part numbers that this element may replace 25-4041NH, 6-FLO, 6-FLO-TE, 6-FLO-ET, 20-3440. Note: We advise all hot tub owners to have their water tested bi-weekly, to help insure an even longer life for your spa component.

more >>
BW SPA PARTS
$39.95 See It
Search within results