1 to 20 of  111 products for voltage tester

Result for "voltage tester"
12-1012 Handheld Battery Tester with USB Port

Handheld Battery Tester with USB Port - 12-1012. Tests all 12V batteries - flooded and AGM. Performs complete electrical system tests in about 3 minutes. Stores last test series without the need for continuous power. Four line LCD display displays battery life status, measured voltage, CCA rating and internal resistance. USB port allows transfer and storage of test results to PC for printing and records

more >>
Tyler Tool
$159.99 See It
12-1015 Handheld Battery Tester with USB Port & Thermal Printer

Handheld Battery Tester with USB Port & Thermal Printer - 12-1015. Tests all 12V batteries - flooded and AGM. Performs complete electrical system tests in about 3 minutes. Stores last test series without the need for continuous power. Ten line LCD display displays battery life status, measured voltage, CCA rating and internal resistance. USB port allows transfer and storage of test results to PC for printing and records. Built-in thermal printer allows users to print test results directly from the unit

more >>
Tyler Tool
$289.99 See It
6031 Alternator & Battery Tester

Alternator & Battery Tester - 6031. Tests for defective alternator diodes including the GM trio test. Performs complete battery system test. 125 amp load checks state of charge. Searches for excess starter current and alternator/regulator output voltage. Easy-to-read voltage meters for quick reading and analysis

more >>
Tyler Tool
$119.99 See It
6024 Handheld Alternator and Battery Tester

Handheld Alternator and Battery Tester - 12-1015. Tests all 14V and 24V battery types including flooded, maintenance free, deep cycle, AGM and gel. Easy-to-read voltage meters for quick reading and analysis. Heavy-duty insulated safety clamps with 300 amp jaws and side terminal adapters. Stainless steel enclosure with heavy-duty hanger hook for storage. Tests alternators and starters on all vehicle types

more >>
Tyler Tool
$129.99 See It
PBT300 Professional Battery Diagnostic Tester

Professional Battery Diagnostic Tester - PBT300. Measurement range from 100?1400 CCA. Accurate battery test decision in seconds. No user interpretation required. Voltmeter mode for testing both the starter and the charging system. Green and red LEDs give fast decisions on starter and charging system testing. Starter system testing: pressing the down arrow displays the captured voltage from cranking the engine. Charging system testing: pressing the up arrow displays the captured high voltage from the alternator

more >>
Tyler Tool
$229.99 See It
3183 Digital Battery Tester

Digital Battery Tester - 3183. Soft-Sided Carrying Case. Utilizes cost effective conductance test technology for accurate testing at a value price point. Quick 1 second initial results. Analyze starting/charging system voltages. Tests 12V batteries. Temperature and low charge compensation. Detects and identifies loose leads. Detects bad cells. Surface charge warning. Measures multiple international units: CCA, IEC, DIN, BCI, and EN. 4 digit LED display shows good/bad status, available CCAs, and voltage

more >>
Tyler Tool
$129.99 See It
DC 6V 12V 24 Volts Voltage Gauge Test VoltMeter Circuit Tester

Description :, DC 6V 12V 24 Volts Voltage Gauge Test VoltMeter Circuit Tester, Features : , , , , Test voltage DC 6V 12V 24V, Suitable for many place( auto, boats, motor cycles and small engines), Not produce heat when working, comfortable and safe., , , Compact size,easy to carry, Description : , Material : Copper, Test range : DC 6V 12V 24V, Tester Length : 10.5cm, Cable length : 60cm, Weight : 35g, Package included : , 1 x Circuit Tester, Details pictures : , , , , , , , , , , , , , , , , , , ,

more >>
Banggood
$2.10 See It
5490 12V Electronic Battery Tester

12V Electronic Battery Tester - 5490. Easy to use - simply choose between automotive, truck or small automotive type batteries for testing. No battery size needs to be entered into the unit for proper testing. Eliminates tester input errors and allows the testing of unknown size batteries. Accurate readings of batteries as low as 5% charge state. LED bar graph immediately displays battery condition upon pressing the test button. No conversion tables needed for CCA, SAE, IEC, EN or amp hours. Tests 12V charging and starting systems. Low voltage LED indicator lights signal when charging is necessary

more >>
Tyler Tool
$139.99 See It
61-797 Digital Insulation Tester, test-and-measurement

Ideal 61-797 Specifications: • Test Voltages: 50/100/250/500/1000 VDC • Voltage AC/DC: 0.1-600.0 V • Insulation Resistance: up to 20G Ohms • Earth Bond Resistance: 0.01 Ohms to 40.00k Ohms Ideal 61-797 Includes: • (1) Insulation Tester Ideal 61-797 Features: • Checks new and existing installations for proper insulation • Performs maintenance checks on motor windings • Measures earth-bond resistance • Calculates PI and DAR automatically • Stores values in memory for easy recall

more >>
Toolup.com
$485.83 See It
BVA-300 40 Amp Hand-Held Battery and Electrical System Micro-Processor Tester

This tester is for battery and electrical systems in automotive and marine starting and charging systems. The information for each test is stored and the last 50 tests can be retrieved by displaying them on its LCD screen, downloading to the optional AC-22 infrared printer, or by downloading to a personal computer with the AC-12 PC adapter cable. It has rugged plastic with rubber boot for easy grip. This is a portable full-featured menu-driven battery tester and system analyzer that provides quick, professional load results using Auto Meter's pulsed load. The quick battery checks will increase charging productivity. It is user friendly. The stator-diode test automatically indicates open or shorted stator-diodes. It is professionally accurate. The detailed test results are LCD displayed after each test or can be reviewed and/or printed from memory. This hand-held tester is the auto industries answer to portability in a professionally accurate battery load tester and system analyzer. Both jaws of each clamp must firmly engage the battery terminal. The wire soldered to the copper insert jaw must be insulated from the other wire soldered to the opposite handle. This insulation is required so that one can read the Amperes and the other reads the Volts. The damaged clamps or loose wires will affect the readings. It is used in 6 Volt and 12 Volt automotive and commercial starting batteries and 12 Volt starting and charging systems. It features battery CCA Range of 200-1600, automated load of 40 amperes, voltmeter range from 0 to 30 with 0.01 resolution, cooling is done by heat sink/vented, digital display of 1 inches x 2.5 inches with 4 line 16 character, operational temperature of 0-120 Degrees Fahrenheit, operational humidity of 0-85 per cent, language is in English or spanish, internal battery of 9 Volt dc. It can do alternator test, stator diode test, starter draw test. It does not have external volt leads. There is no voltage drop test.

more >>
Amazon
$332.11 See It
Electric Fence Tester - Five Lights

"This electric fence tester reads the voltage on an electric fence line up to 4+ kilovolts, the reading being indicated by the number of lights lit."

more >>
Discount Electric Fence
$11.69 See It
Electric Fence Tester - Eight Lights

"This electric fence tester reads the voltage on an electric fence line up to 7 kilovolts, the reading being indicated by the number of lights lit."

more >>
Discount Electric Fence
$15.49 See It
Handheld Battery Tester with USB Port & Thermal Printer 12-1015

Handheld Battery Tester with USB Port & Thermal Printer - 12-1015. Tests all 12V batteries - flooded and AGM. Performs complete electrical system tests in about 3 minutes. Stores last test series without the need for continuous power. Ten line LCD display displays battery life status, measured voltage, CCA rating and internal resistance. USB port allows transfer and storage of test results to PC for printing and records. Built-in thermal printer allows users to print test results directly from the unit

more >>
CPO Outlets
$289.99 See It
Handheld Battery Tester with USB Port 12-1012

Handheld Battery Tester with USB Port - 12-1012. Tests all 12V batteries - flooded and AGM. Performs complete electrical system tests in about 3 minutes. Stores last test series without the need for continuous power. Four line LCD display displays battery life status, measured voltage, CCA rating and internal resistance. USB port allows transfer and storage of test results to PC for printing and records

more >>
CPO Outlets
$159.99 See It
Alternator & Battery Tester 6031

Alternator & Battery Tester - 6031. Tests for defective alternator diodes including the GM trio test. Performs complete battery system test. 125 amp load checks state of charge. Searches for excess starter current and alternator/regulator output voltage. Easy-to-read voltage meters for quick reading and analysis

more >>
CPO Outlets
$119.99 See It
ProSeries 6/12V 300 Amp Manual Battery Charger/Starter/Tester PSW-3060

ProSeries 6/12V 300 Amp Manual Battery Charger/Starter/Tester - PSW-3060. Manual operation. Ideal for heavy-duty, industrial and fleet operations that need power and battery system test capability. 300 amp 12V/200 amp 6V engine start for emergency starting. 60 amp rapid charge charges a battery in 1/2 to 2 hours. 30 amp charge for very fast charging charges in 1 to 3 hours. 135-minute timer with "hold" position for precise control of the charge duration. Charger shuts off after timer expires. On-board battery load tester tests 50 amps on a 6V system and 100 amps on a 12V system. Durable construction with tubular chromed handle. 6 ft., 4-gauge TPE welding grade battery cables with epoxy coated 400 amp steel clamps and copper jaws. Extra-long 9 ft. 120V line cord for extended reach. Rugged durable metal case with powder coat finish. Heavy-duty voltage and rate control switches. Fiber glass rod for clamp storage

more >>
CPO Outlets
$379.99 See It
Non-Contact Phase Sequence Tester, Model PRT200

This Extech Non-Contact Phase Sequence Tester uses a non-contact voltage-testing method that permits easy connection to insulated conductors, avoiding uncertain and difficult connections to bare high voltage wires. Volts 75 to 1,000 AC, Battery...

more >>
Northern Tool
$189.99 See It
12V Electronic Battery Tester 5490

12V Electronic Battery Tester - 5490. Easy to use - simply choose between automotive, truck or small automotive type batteries for testing. No battery size needs to be entered into the unit for proper testing. Eliminates tester input errors and allows the testing of unknown size batteries. Accurate readings of batteries as low as 5% charge state. LED bar graph immediately displays battery condition upon pressing the test button. No conversion tables needed for CCA, SAE, IEC, EN or amp hours. Tests 12V charging and starting systems. Low voltage LED indicator lights signal when charging is necessary

more >>
CPO Outlets
$142.49 See It
Digital Battery Tester 3183

Digital Battery Tester - 3183. Soft-Sided Carrying Case. Utilizes cost effective conductance test technology for accurate testing at a value price point. Quick 1 second initial results. Analyze starting/charging system voltages. Tests 12V batteries. Temperature and low charge compensation. Detects and identifies loose leads. Detects bad cells. Surface charge warning. Measures multiple international units: CCA, IEC, DIN, BCI, and EN. 4 digit LED display shows good/bad status, available CCAs, and voltage

more >>
CPO Outlets
$129.99 See It
(PPRPPIV) IV Diagnostic Circuit Tester # PPIV, Circuit Testers

Large Multi-Line Color LCD Screen (60% larger than the PPIII) Water and dust resistant with loud indicator tones Measure DC, AC, and Frequency (HZ) Test resistance on live and unloaded circuits Fuel Injector Tester Mode The Power Probe IV provides the ability to supply battery ground and power with 9 diagnostic testing modes to provide Automotive Technicians with detailed information on the circuits and signals being tested. The PPIV will test for A/C volts RMS, volts P-P, resistance, hertz, frequency, pulse width (negative and positive), verifies fuel injector driver conditions, supplies computer safe voltage for testing module drivers (transistors), and work as a circuit tracer with the ECT2000 (not included). APPLICATIONS: Test millivolts for parasitic draws, charging system connectors, starting systems, sensors, modules and much more Test for good source ground and power feeds Test pulse width in fuel injectors and ignition modules Test frequency (HZ) of regulators, injecto

more >>
ToolTopia.com
$275.00 See It