1 to 20 of  543 products for www ak47 com

Result for "www ak47 com"
Ak-47 Trigger Group - Single-Hook Trigger Group

Drop-in replacement for factory trigger provides smooth, crisp 3 to 4lb. trigger pull and eliminates painful trigger slap common to AK-47s. Innovative trigger sleeve lets you assemble the trigger group outside the gun, then install it as a unit. Fits factory trigger and hammer pin holes, so theres no need to modify your rifle. Investment cast from 4140 tool steel, then precision machined to final dimensions for perfect fit and functional reliability. Heat-treated to Rc 45-48, with a military-type black oxide finish for superb wear resistance. Made in the U.S.A. to keep your gun in compliance with U.S. Code Title 18 Section 922(r) part-source requirements. Kit counts as three, U.S.-made pa Mfg: Tapco Weapons Accessories SPECS: 4140 steel, black oxide finish. Hardened to Rc 45-48. Kit includes trigger, disconnector, trigger sleeve, and hammer.

more >>
Brownells
$29.99 See It
AK47 Pin

This AK47 Pin is approximately 2 inch in size.. This pin is usually shipped in 1-5 business days and as with all of our products carries a 100% customer satisfaction guarantee.

more >>
PriorService
$4.94 See It
Ak-47 Recoil Buffer

Polymer buffer fits on the bolt spring to reduce bolt slap, felt recoil, and overall wear and tear. Provides a cushion that prevents the bolt from making contact with the receiver to reduce wear on both components. Installs easily over rear of spring assembly; no permanent modifications to rifle required. Good for at least 5,000 firing cycles. Mfg: Power Custom SPECS: Polymer, black. ½" (1.3cm) long, 15⁄16" (2.4cm) wide, 1¼" (3. 2cm) high. Fits all models of AK-47, Mak-90, Galil, and Valmet.

more >>
Brownells
$9.99 See It
Ak-47 Spring Kit

Complete, five spring replacement kit includes (1) recoil, (1) hammer, (1) disconnector, (1) magazine catch, and (1) extractor spring for standard 7.62mm AK-47 rifles. Prevents malfunctions caused by fatigued springs and restores rifle to factory-original performance. Perfect for repair, rebuild projects, or as an emergency back-up kit. Mfg: Brownells SPECS: Spring steel. Fits standard 7.62mm AK-47 rifles.

more >>
Brownells
$34.99 See It
Ak-47 Grip Screw & Bushing

Steel grip screw and bushing are direct replacements for the original pistol grip parts. Precisely formed and threaded with American quality control, sometimes lacking in foreign factories, for proper fit and function. Makes sense to replace these parts when installing a new grip. Bushing is stamped "TAPCO USA". Mfg: Tapco Weapons Accessories SPECS: Carbon steel, black oxide finish. 4" (10.1cm) long. Slotted head, M6 x 1mm threads.

more >>
Brownells
$7.99 See It
Ak-47 Rivet Set

Swelled-neck rivets are manufactured to fit tightly in countersunk receiver holes. Correct-hardness steel alloy will peen and mushroom out to securely hold receiver parts in place. Mfg: High Standard SPECS: Steel, in-the-white. Fits fixed-stock AKM variants only. Includes the two trunnion rivets and 11 receiver rivets.

more >>
Brownells
$10.63 See It
AK-47 MKII (AK47 MKII Large Diaphragm Cond)

Studio Microphones - Add classic tube-mic character to your studio with the Telefunken AK-47 MkII tube condenser microphone. Three polar patterns and six intermediate stages make the AK47 MkII a real studio workhorse. You get the best of both worlds: outstanding detail plus classic richness. This mic sports a genuine NOS Telefunken EF-732 tube and a custom output transformer for detail and sound that recalls historic U-47 and U-48 mics, so you know you're getting authentic performance. The AK47 MkII comes complete with a wooden case and a shockmount. Telefunken AK-47 II Tube Condenser Microphone at a Glance:Top-of-the-line components provide great soundReal tube-fired tone that will impressVariable polar patterns offer recoding flexibilityTop-of-the-line components provide great soundTelefunken mics are renowned for both their top-flight build quality and their usefulness in the studio. The Telefunken AK-47 MkII tube condenser mic is no exception. This fantastic tube condenser works amazingly well on an array of sources, including vocals, stringed instruments, drums, and even saxophones. Using a European-made reissue transformer, the Telefunken AK-47 MkII delivers classic tube mic sounds reminiscent of vintage U-47 mics. This coupled with its custom large diaphragm deliver an extended low end and smoother, more open highs.Real tube-fired tone that will impressYou can't deny the warmth of tube-driven mics. You'll love the warm and detailed, accurate sound that the Telefunken AK-47 MkII gives you, thanks to its tube design and NOS EF-732 tube. Get that elusive tube mic sound with the Telefunken AK-47 MkII tube condenser microphone.Variable polar patterns offer recoding flexibilityNot just a one-trick pony, the Telefunken AK-47 MkII tube condenser microphone's power supply features switchable polar patterns. You get omni, cardioid, figure 8, and 6 other intermediate stages. In other words, no matter what you're miking, the AK-47 MkII has a polar pattern to maximize it. Use the omni pattern to catch the sound of a great room or a group of singers, cardioid to reject unwanted sounds, and figure 8 is great for mid-side recording. The versatile and flexible Telefunken AK-47 MkII tube condenser mic is ready for any session.Telefunken AK-47 II Tube Condenser Microphone Features:The smooth top end and warm sound that only a tube mic can deliverSelectable omni, cardioid, figure 8, and 6 other intermediate polar pattern stagesBV8 transformer is an accurate reproduction of the classic U-47 transformerMicrophone-grade NOS EF-732 tube delivers stellar sound and performanceIncredibly realistic and detailed sound reproductionIncludes a power supply, shockmount, and wooden boxBring the warm sound of tubes to your mic locker with the Telefunken AK-47 MkII tube condenser microphone. Condenser Microphones

more >>
Sweetwater
$1,895.00 See It
Ak-47 Scout Mount

Style 2 - For AK type rifles that have original gas tubes with side gas port holes. Scout Mount is constructed of one-piece, 6061-T6 hard anodized aluminum and a single MIL-STD 1913 Picatinny rail for mounting optics and accessories. Mount replaces the gas tube and attaches directly to the barrel with 4140 steel clamps for stability and accuracy. Includes vent holes near front end. Mounting tools and instructions included. No gunsmithing needed. Mfg: Ultimak SPECS: Scout Mount 6061-T6 hard anodized aluminum, 4140 steel mounting clamps, matte black. 6.7" (17cm) long. Fits 7.62x39 caliber rifles that have original gas tubes with side gas port holes as found mostly on Chinese AKs.

more >>
Brownells
$94.99 See It
Ak-47 Mag Loader

Tough, lightweight, reinforced, black-polymer loader saves fingers, thumbs, and wasted time; lengthens magazine life and lessens wear and tear on magazine lips. Staggered, triangular pieces of plastic securely grasp rounds for effortless loading when you move the lever back and forth. Fits in your pocket. Mfg: Maglula Ltd. SPECS: Reinforced polymer. Ak-47/Galil - Fits all Ak-47 (7.62mm) and Galil (5.56/.223) metal and plastic magazines.

more >>
Brownells
$27.99 See It
Ak-47 Battle Grip

Textured, polymer pistol grip fits a wide range of Kalashnikov variants, including AK-47, AK-74 and AKM to give the shooter a more secure, comfortable grasp than with the narrow factory grip. Positions the operator's hand close to the receiver for better control, while the aggressive, non-slip "crackle" texture ensures a solid purchase. Easy to install; comes with stock bolt and locking washer. Mfg: Us Palm SPECS: Molded polymer, black. 4¼" (10.8cm) tall, 2-3⁄8" (6.0cm) wide at base, 1¼" (3.2cm) thick. Fits AK-47, AK-74, AKM, PKM, RPK, Yugoslav/Serbian M64/M70/M72/M21, Iraqi Tubuk, and other modern AK variants that use the AK-47 pattern pistol grip. Includes bolt a

more >>
Brownells
$29.99 See It
Ak-47 Trigger Group - Double-Hook Trigger Group

Drop-in replacement for factory trigger provides smooth, crisp 3 to 4lb. trigger pull and eliminates painful trigger slap common to AK-47s. Innovative trigger sleeve lets you assemble the trigger group outside the gun, then install it as a unit. Fits factory trigger and hammer pin holes, so theres no need to modify your rifle. Investment cast from 4140 tool steel, then precision machined to final dimensions for perfect fit and functional reliability. Heat-treated to Rc 45-48, with a military-type black oxide finish for superb wear resistance. Made in the U.S.A. to keep your gun in compliance with U.S. Code Title 18 Section 922(r) part-source requirements. Kit counts as three, U.S.-made pa Mfg: Tapco Weapons Accessories SPECS: 4140 steel, black oxide finish. Hardened to Rc 45-48. Kit includes trigger, disconnector, trigger sleeve, and hammer.

more >>
Brownells
$29.99 See It
Ak-47 Hammer/Trigger Axis Pin - Hammer/Trigger Pin

Newly-manufactured parts eliminate the struggle of trying to build a reliable gun with worn out, used Eastern Bloc parts. These high quality rivets, pins and reinforcement plates are just what you need to successfully complete your AK Rifle build. Extended length shaft fits AK-47 receivers up to 1.390" (3.53cm) wide. Underside of retaining head is tapered to provide an exact fit and still allow easy removal. Turned from tool steel for outstanding wear resistance. Sold individually; assembly requires two pins. Mfg: Ak Builder SPECS: Tool steel, hardened to Rc 50-52, black oxide finish. 1.44"(3.6cm) long, 1.19" shaft length, .19" (4.9mm) diameter.

more >>
Brownells
$3.49 See It
Ak-47/Amd Muzzle Brakes - Slant Muzzle Brake

Machined from steel with a black phosphate or blued finish, these replacements for the factory muzzle brake decrease muzzle rise and help dampen felt recoil. High quality, affordable, 922(r)-compliant parts fit the standard 14mm-1 LH thread AK muzzle for easy, fast installation. Slant incorporates the look and muzzle climb-reducing properties of the original AK-47 muzzle brake. Cage is patterned after the RPK light machine gun brake to help reduce felt recoil while giving your AK a distinctive appearance. Slot offers alternate styling and recoil reduction, with a solid underside that reduces dust printing when shooting prone. Made in the U.S.A. to keep your gun in compliance with the U.S. Mfg: Tapco Weapons Accessories SPECS: Steel, all except Cage with blued, matte finish. Fits standard 14mm x 1 LH muzzle threads. Slant - 15⁄16" (3.3cm) long, 11⁄16" (1.7cm) O.D. Cage - Phosphate finish, matte black. 119⁄32" (4cm) long, 11⁄16" (1.7cm) O.D. Slot - 151⁄64" (4

more >>
Brownells
$9.99 See It
Ak-47/Amd Muzzle Brakes - Slot Muzzle Brake

Machined from steel with a black phosphate or blued finish, these replacements for the factory muzzle brake decrease muzzle rise and help dampen felt recoil. High quality, affordable, 922(r)-compliant parts fit the standard 14mm-1 LH thread AK muzzle for easy, fast installation. Slant incorporates the look and muzzle climb-reducing properties of the original AK-47 muzzle brake. Cage is patterned after the RPK light machine gun brake to help reduce felt recoil while giving your AK a distinctive appearance. Slot offers alternate styling and recoil reduction, with a solid underside that reduces dust printing when shooting prone. Made in the U.S.A. to keep your gun in compliance with the U.S. Mfg: Tapco Weapons Accessories SPECS: Steel, all except Cage with blued, matte finish. Fits standard 14mm x 1 LH muzzle threads. Slant - 15⁄16" (3.3cm) long, 11⁄16" (1.7cm) O.D. Cage - Phosphate finish, matte black. 119⁄32" (4cm) long, 11⁄16" (1.7cm) O.D. Slot - 151⁄64" (4

more >>
Brownells
$13.99 See It
Ak-47 Barrels - Ak-47 Barrel, 1970 Profile

High-quality carbon steel, 7.62x39mm chambered barrel with 1:9.5" twist rate features chrome-lined chamber and bore for maximum service life. Matte black/dark gray Parkerized finish provides corrosion- and wear-resistance. Comes with 14x1mm left-hand muzzle threads. Fits 23mm trunnions. Requires gas port drilling and headspacing set by a knowledgeable gunsmith. 1970 barrel fits M70 Yugoslavian receivers with fixed or underfolder stock; no side cuts. 1975 barrel has the side cuts and fits receivers of American, Romanian, Polish, Maadi, and clones with fixed or underfolder stocks. Mfg: Green Mountain SPECS: 4140 carbon steel, chrome lined, black oxide exterior finish. 16-3/8" (41.5cm) long. 14-1mm LH muzzle thread. 1:9.5" twist. Fits 23mm trunnions. 1970 21.5 oz. (610g) wt. 1975 19.4 oz. (550g) wt.

more >>
Brownells
$159.99 See It
Ak-47 Barrels - Ak-47 Barrel, 1975 Profile

High-quality carbon steel, 7.62x39mm chambered barrel with 1:9.5" twist rate features chrome-lined chamber and bore for maximum service life. Matte black/dark gray Parkerized finish provides corrosion- and wear-resistance. Comes with 14x1mm left-hand muzzle threads. Fits 23mm trunnions. Requires gas port drilling and headspacing set by a knowledgeable gunsmith. 1970 barrel fits M70 Yugoslavian receivers with fixed or underfolder stock; no side cuts. 1975 barrel has the side cuts and fits receivers of American, Romanian, Polish, Maadi, and clones with fixed or underfolder stocks. Mfg: Green Mountain SPECS: 4140 carbon steel, chrome lined, black oxide exterior finish. 16-3/8" (41.5cm) long. 14-1mm LH muzzle thread. 1:9.5" twist. Fits 23mm trunnions. 1970 21.5 oz. (610g) wt. 1975 19.4 oz. (550g) wt.

more >>
Brownells
$159.99 See It
Ak Extended Magazine Release - Ak47 Extended Magazine Release

Attaches securely to existing AK magazine release with 2 set screws for 1 finger magazine removal. The AKMR provides a larger surface area to release a magazine. By Wrapping around the trigger guard, the AKMR provides fast and easy access. Mfg: Command Arms Acc SPECS: Polymer. Weight - .64 ounces.

more >>
Brownells
$14.40 See It
Ak-47/Saiga Lower Handguard Retainer - Lower Handguard Retainer

Lower handguard front retainer cap replaces a worn or dinged-up part on a military-style AK-47 or serves as an adapter for installing an AK handguard on a Saiga sporting rifle. Rugged, all-aluminum construction, with a hardened, steel hex-head crossbolt ensures a secure, rattle-free installation. Correctly positioned hole in the front of the cap lets you carry a cleaning rod on the rifle, enhancing the authentic military look. Mfg: Vulcan Arms SPECS: Aluminum, hardcoat anodized, matte black. Includes 8-32 thread steel cap screw, black oxide finish.

more >>
Brownells
$32.99 See It
Ak-47 30-Round Magazine - Ak-47 Magazine

Double-stack magazine of lightweight injection-molded polymer is reinforced with a stainless steel cage molded into the upper body for superb strength and reliability. Designed with a permanently attached base plate to form an ultra-rigid, five-sided box that's highly resistant to breakage when ejected onto hard surfaces. Aggressive horizontal serration on front and rear, plus ribs on the sides, ensure a positive purchase to aid fast mag changes. Low-friction, semi-floating follower has slots for easy access to interior for cleaning with a power blaster or immersion in hot, soapy water. Heat-treated, stress-relieved, mil-spec corrosion-resistant coated chromium-silicon spring. Mfg: Us Palm SPECS: Injection-molded reinforced polymer, black. 9" (23cm) high, 2" (5cm) wide, 13⁄16" (3cm) thick. 7 oz. wt. Fits AK-47 and clones chambered in 7.62 x 39mm.

more >>
Brownells
$29.99 See It
Ak-47 Magazine Well - Ak47 Mag Well

AK47 MFER (Magazine Funnel Enhanced Reload) Allows the user to reload an AK47 faster than ever Large funnel opening guides magazine into position Drop-in part, no modification to the host weapon Fits all AKM pattern AK47 style rifles along with 7.62 Saigas Will not fit standard Yugo pattern AKs Polymer construction with stainless steel hardware Includes mounting hardware Mfg: Solar Tactical SPECS: Fits AKM/AK47 rifles. Polymer construction, stainless steel hardware.

more >>
Brownells
$42.00 See It
Search within results

Popular queries