1 to 18 of  18 products for yanmar tractor steering box rebuild kit

No exact matches found for yanmar tractor steering box rebuild kit

18 similar items found

RS3704 Air Filter

Fits: Isuzu, Yanmar Engines; Bobcat, Caterpillar, John Deere, Komatsu, Kubota Equipment Replaces: John Deere M131802; Kubota TA040-93230; Melroe-Bobcat 6672467; Yanmar 119808-12520 Descriptions: Radial Seal Outer Air Element Use With: RS3705 Fits: Isuzu, Yanmar Engines; Bobcat, Caterpillar, John Deere, Komatsu, Kubota Equipment Replaces: John Deere M131802; Kubota TA040-93230; Melroe-Bobcat 6672467; Yanmar 119808-12520 O.D.: 4 1/8 (104.8) I.D.: 2 5/16 (58.7) One End Length: 10 13/16 (274.6) Related to: RS3716 (with Flame Retardant Media) UPC: 7 91440 04574 3

more >>
Buy Schaeffer Oil
$39.25 See It
Quincy QT-10 Splash Lubricated Reciprocating Air Compressor - 10 HP Yanmar Diesel Engine, 30-Gallon Horizontal, Model D207Y30HC

Quincy Air Master reciprocating air compressors are designed to be a compressor for life. They are built for efficiency and lower operating costs, producing more compressed air at a lower horsepower. They run at a slower RPM, run cooler and cost less...

more >>
Northern Tool
$5,499.99 See It
94LY-165-12-IG Large Case Alternator for Yanmar 6LY Engines

Balmars 94LY-Series large case alternators deliver the size and charging output required to support battery banks of up to 800 amp hours at 12 volts or 400 amp hours at 24 volts. Designed expressly for use on Yanmar 6LY diesel engines, these 12-volt and 24-volt alternators are engineered for use with external multi-stage voltage regulation, making it possible to tailor charging voltage to maximize safety and efficiency when replenishing a wide variety of battery types. A 3.15 I.D. saddle style mount enables the 94LY alternator to replace the standard internally-regulated OEM alternator on Yanmars 6LY engines, and on other engines with like mounting and belt configurations. Custom-wound rotor/stator combinations optimize output across the typical diesel powerband. Isolated ground provides sure continuity to system ground. Meets U.S. Coast Guard Title 33 standards for ignition protection. SpecificationsAlternator style: Large-caseRegulation: External P-typeCase construction: Cast aluminumFinish: White powdercoatingCooling: Bi-directional external fanDiodes: 6-positive, 6-negative; 50A/200VRequired belt configuration: Dual 1/2 vee; 8-groove serpentineGround termination: Case independentTach output: Unrectified AC stator outputBearings: Sealed ball bearing. Heavy duty radial (front). Heavy duty needle (rear)Tensioning arm: 180 offset from mounting footAvailable outputs: 165A/12V, 210A/12V, 140A/24VMounting style: 3.15 ID saddle-style mounting feet

more >>
Peter Kennedy Yacht Services
$1,263.12 See It
Second Alternator Kit for Yanmar Engines

Designed for Balmar 95-Series 165 Amp or 210 Amp large case alternators, these kits include custom brackets, a beefy turnbuckle style tensioner and all necessary installation hardware to install a second alternator on the Yanmar engines listed below. The alternator will be installed at the front of the engine so you need to ensure that adequate space is available.  Because the alternator is facing in the opposite direction to normal it will be counter rotating and needs to have the bi-directional fan installed.For Balmar 95-Series alternators.  Alternator NOT included.Installation instructions for 4JH4-HTE and 4JH4-TE  Second   Alternator Bracket Kits Altmount Kit Model Yanmar Engine Model 48-YDA-4JH-A 4JH3 48-YDA-4JH-B 4JH4-THE, TE 48-YDA-4JH-C 4JH4-E 48-YDA-6LY-A 6LY Please specify the Altmount Kit model number and the Engine model number in the order notes at checkout  Here is a helpful link to understanding the model numbers of Yanmar engines

more >>
Peter Kennedy Yacht Services
$1,149.60 See It
94LY-140-24-IG Large Case Alternator for Yanmar 6LY Engines

Balmars 94LY-Series large case alternators deliver the size and charging output required to support battery banks of up to 800 amp hours at 12 volts or 400 amp hours at 24 volts. Designed expressly for use on Yanmar 6LY diesel engines, these 12-volt and 24-volt alternators are engineered for use with external multi-stage voltage regulation, making it possible to tailor charging voltage to maximize safety and efficiency when replenishing a wide variety of battery types. A 3.15 I.D. saddle style mount enables the 94LY alternator to replace the standard internally-regulated OEM alternator on Yanmars 6LY engines, and on other engines with like mounting and belt configurations. Custom-wound rotor/stator combinations optimize output across the typical diesel powerband. Isolated ground provides sure continuity to system ground. Meets U.S. Coast Guard Title 33 standards for ignition protection. SpecificationsAlternator style: Large-caseRegulation: External P-typeCase construction: Cast aluminumFinish: White powdercoatingCooling: Bi-directional external fanDiodes: 6-positive, 6-negative; 50A/200VRequired belt configuration: Dual 1/2 vee; 8-groove serpentineGround termination: Case independentTach output: Unrectified AC stator outputBearings: Sealed ball bearing. Heavy duty radial (front). Heavy duty needle (rear)Tensioning arm: 180 offset from mounting footAvailable outputs: 165A/12V, 210A/12V, 140A/24VMounting style: 3.15 ID saddle-style mounting feet

more >>
Peter Kennedy Yacht Services
$1,344.15 See It
94LY-210-12-IG Large Case Alternator for Yanmar 6LY Engines

Balmars 94LY-Series large case alternators deliver the size and charging output required to support battery banks of up to 800 amp hours at 12 volts or 400 amp hours at 24 volts. Designed expressly for use on Yanmar 6LY diesel engines, these 12-volt and 24-volt alternators are engineered for use with external multi-stage voltage regulation, making it possible to tailor charging voltage to maximize safety and efficiency when replenishing a wide variety of battery types. A 3.15 I.D. saddle style mount enables the 94LY alternator to replace the standard internally-regulated OEM alternator on Yanmars 6LY engines, and on other engines with like mounting and belt configurations. Custom-wound rotor/stator combinations optimize output across the typical diesel powerband. Isolated ground provides sure continuity to system ground. Meets U.S. Coast Guard Title 33 standards for ignition protection. SpecificationsAlternator style: Large-caseRegulation: External P-typeCase construction: Cast aluminumFinish: White powdercoatingCooling: Bi-directional external fanDiodes: 6-positive, 6-negative; 50A/200VRequired belt configuration: Dual 1/2 vee; 8-groove serpentineGround termination: Case independentTach output: Unrectified AC stator outputBearings: Sealed ball bearing. Heavy duty radial (front). Heavy duty needle (rear)Tensioning arm: 180 offset from mounting footAvailable outputs: 165A/12V, 210A/12V, 140A/24VMounting style: 3.15 ID saddle-style mounting feetIgnition protection standards: USCG TITLE 33

more >>
Peter Kennedy Yacht Services
$1,344.15 See It
Serpentine Pulley Conversion Kit

These Altmount Kits by Balmar offer the opportunity to install a larger alternator than would otherwise be possible. They are designed to fit select engine models, the list expands every day so if you don't see your engine listed do give us a call. Alternator upgrades using a single drive belt are limited by the amount of power that can be transferred by the belt but using a serpentine belt considerably increases the possibilities. The kits include a set of serpentine pulleys to go over the crankshaft and water pump pulley and replace the alternator pulleys and come with a matching serpentine belt. They are sold for specific engine models only. The alternators need to be purchased separately. If you order an alternator with a kit it will come with the appropriate pulley pre-installed. Installation is relatively easy. The kit comes with two belts but purchasing an additional spare belt is recommended as these are not typical serpentine belts.Kits are available for Yanmar 6L, 4JH, 3JH, 3GM, 3HM, 3YM, and 2 YM engines.  Also Westerbeke, Universal, Perkins, Volvo and Nanni engines, more kits are being added every day so check back or call.Read my BLOG POST about installing one of these kits.My blog post has installation notes for this serpentine kit.Also available but not listed above, the kit for a Westerbeke 35B3 is 48-WSP-35BPlease mention the kit number and your engine model number in the order notes at checkout.  Thank you for your order.

more >>
Peter Kennedy Yacht Services
$612.58 See It
94-210-12-IG Alternator 12 Volts 210 Amps

Delco-style 2" single foot alternators feature oversized bearings and extra high amperage diode ratings to ensure superior cooling characteristics and longer life. Custom wound stators, integrating extra large gauge copper wire deliver outstanding lowend output and impressive performance across the powerband. The 94-Series has a well earned record as a proven workhorse in recreational and commercial systems where large battery banks and large house electrical loads require lots of brawn. Meets USCG Title 33 standards for ignition protection. One year limited warranty.   High output P-type alternator with 12 volt output. Large case heavy duty construction, powder coated finish. 2" single foot Delco style mount. Externally regulated single outputBi-Directional Cooling FanRated To 6,500 RPM Comes standard with 2.7" OD pulley for dual 1/2" belts. Other pulleys available. For non standard pulleys specify your requirements in the notes at checkout and we will call you if necessary to confirm. Additional InformationDetailed specification, drawings, and description.  Applications Because there are so many variations it is impossible to give a definitive list of engines that would be suitable for this alternator.  You need to look at what you have and check it against our alternator mounting guide.  However we can say that these alternators are typically used on the larger Volvo, Cummins, Westerbeke, Perkins, Mercruiser, Yanmar (6LP), Volvo-Penta, GM, and Delco-equipped engines

more >>
Peter Kennedy Yacht Services
$1,263.12 See It
AT-DF-165-12-MC-KIT dual foot AT alternator kit

165 Amp Dual Foot AT alternator kit with MC614-H Regulator, temperature sensors and hardwareAT 165 Amp Dual foot alternator suitable for Yanmar or similar mountKit includes Max Charge MC614-H external alternator regulatorAlso includes battery and alternator temperature sensor and mounting hardwareThis kit requires the use of a Serpentine Belt kit (not inlcluded) or requires your engine to be already equipped with double drive belts or a serpentine belt.  If you are not ordering this in conjunction with a Serpentine Belt kit then this alternator can be supplied with the pulley of your choice, please state your pulley preference in the order notes at checkout. May also require a universal adjustment arm (not included).  For full specifications see the web page listing the individual components using the links below

more >>
Peter Kennedy Yacht Services
$1,495.95 See It
60-24-70-SR-IG Alternator 24 Volts 70 Amps

High output alternator. Small case, isolated ground.Yanmar style dual foot mountExternally regulated single output. Patented SmartReady backup internal regulator. Certified ignition protected for gasoline or diesel motors. High volume cooler running dual internal fans Dual pulley standard, other pulleys optional. For non standard pulleys specify your requirements in the notes at checkout and we will call you if necessary to confirm. Additional InformationDetailed specification, drawings, and description. 

more >>
Peter Kennedy Yacht Services
$877.02 See It
60-120-SR-IG Alternator 12 Volts 120 Amps

High output alternator. Small case, isolated ground.Yanmar style dual foot mountExternally regulated single output. Patented SmartReady backup internal regulator. Certified ignition protected for gasoline or diesel motors. High volume cooler running dual internal fans. Dual pulley standard, other pulleys optional. For non standard pulleys specify your requirements in the notes at checkout and we will call you if necessary to confirm.,/li> Additional InformationDetailed specification, drawings, and description. Here the alternator is shown with a serpentine pulley from the serpentine kit

more >>
Peter Kennedy Yacht Services
$743.55 See It
60-70-SR-IG Alternator 12 Volts 70 Amps

High output alternator. Small case, isolated ground. Yanmar style dual foot mountExternally regulated single output. Patented SmartReady backup internal regulator. Certified ignition protected for gasoline or diesel motors. High volume cooler running dual internal fans Single pulley standard, other pulleys optional. For non standard pulleys specify your requirements in the notes at checkout and we will call you if necessary to confirm. Additional InformationDetailed specification, drawings, and description. 

more >>
Peter Kennedy Yacht Services
$595.78 See It
AT-DF-200-12-IG Dual Foot AT Series Alternator 200 Amps

This is a much higher output alternator than can normally be accommodated in a small case size. The innovation that made this possible is the new hairpin stator technology which greatly improves efficiency. This alternator requires a double pulley or serpentine belt because of the high load that must be transferred, and so this alternator is designed to be used in conjunction with the Serpentine Belt Kit. Also sold as a kit with a regulator and temperature sensors. Externally regulated high output small case alternator12 volt output at 200 Amps, isolated groundDual foot 3.15" ID Yanmar style mount.Requires a Serpentine Belt This alternator requires the Max Charge regulator to achieve full outputSee dimensioned drawings for mounting details

more >>
Peter Kennedy Yacht Services
$1,390.95 See It
AT-DF-165-12-IG Dual Foot AT Series Alternator 165 Amps

This is a much higher output alternator than can normally be accommodated in a small case size. The innovation that made this possible is the new hairpin stator technology which greatly improves efficiency. This alternator requires a double pulley or serpentine belt because of the high load that must be transferred, and so this alternator is designed to be used in conjunction with the Serpentine Belt Kit. Also sold as a kit with a regulator and temperature sensors. Externally regulated high output small case alternator12 volt output at 165 Amps, isolated groundDual foot 3.15" ID Yanmar style mount.Requires a Serpentine Belt This alternator requires the Max Charge regulator to achieve full outputSee dimensioned drawings for mounting details

more >>
Peter Kennedy Yacht Services
$1,090.94 See It
94-165-12-IG Alternator 12 Volts 165 Amps

Delco-style 2" single foot alternators feature oversized bearings and extra high amperage diode ratings to ensure superior cooling characteristics and longer life. Custom wound stators, integrating extra large gauge copper wire deliver outstanding lowend output and impressive performance across the powerband. The 94-Series has a well earned record as a proven workhorse in recreational and commercial systems where large battery banks and large house electrical loads require lots of brawn. Meets USCG Title 33 standards for ignition protection. One year limited warranty.   High output P-type alternator with 12 volt output. Large case heavy duty construction, powder coated finish. 2" single foot Delco style mount. Externally regulated single outputBi-Directional Cooling FanRated To 6,500 RPM Comes standard with 2.7" OD pulley for dual 1/2" belts. Other pulleys available. For non standard pulleys specify your requirements in the notes at checkout and we will call you if necessary to confirm. Additional InformationDetailed specification, drawings, and description.  Applications Because there are so many variations it is impossible to give a definitive list of engines that would be suitable for this alternator.  You need to look at what you have and check it against our alternator mounting guide.  However we can say that these alternators are typically used on the larger Volvo, Cummins, Westerbeke, Perkins, Mercruiser, Yanmar (6LP), Volvo-Penta, GM, and Delco-equipped engines  

more >>
Peter Kennedy Yacht Services
$1,191.62 See It
60-100-SR-IG Alternator 12 Volts 100 Amps

This dual foot alternator is typically used on Yanmar diesels or any engine with a dual foot mount alternator. It has a single pulley which requires a 1/2" drive belt High output alternator. Small case, isolated ground. Yanmar style dual foot mount Externally regulated single output Patented SmartReady backup internal regulator. Certified ignition protected for gasoline or diesel motors. High volume cooler running dual internal fans. Single pulley is standard, other pulleys optional. For non standard pulleys specify your requirements in the notes at checkout and we will call you if necessary to confirm.   Additional Information Detailed specification, drawings, and description. Read my Blog post on installing this alternator  Here is the output curve for this alternator. The red line is the output when hot, the blue line is when it is cold.  The RPM referred to is alternator RPM and the ratio between the engine pulley and the alternator pulley determines what engine rpm corresponds to each alternator rpm, but typically the ration might be 2.5 : 1

more >>
Peter Kennedy Yacht Services
$667.29 See It
60-150-SR-IG Alternator 12 Volts 150 Amps

High output alternator. Small case, isolated ground.Yanmar style dual foot mountExternally regulated single output. Patented SmartReady backup internal regulator. Certified ignition protected for gasoline or diesel motors. High volume cooler running dual internal fans Dual pulley standard, other pulleys optional For non standard pulleys specify your requirements in the notes at checkout and we will call you if necessary to confirm. Additional InformationDetailed specification, drawings, and description. 

more >>
Peter Kennedy Yacht Services
$877.02 See It
AT-DF-200-12-MC-KIT dual foot AT alternator kit

200 Amp Dual Foot AT alternator kit with MC614-H Regulator, temperature sensors and hardwareAT 200 Amp Dual foot alternator suitable for Yanmar or similar mountKit includes Max Charge MC614-H external alternator regulatorAlso includes battery and alternator temperature sensor and mounting hardwareThis kit requires the use of a Serpentine Belt kit (not included) or requires your engine to be already equipped with double drive belts or a serpentine belt.  If you are not ordering this in conjunction with a Serpentine Belt kit then this alternator can be supplied with the pulley of your choice, please state your pulley preference in the order notes at checkout. May also require a universal adjustment arm (not included).  For full specifications see the web page listing the individual components using the links belowSorry the dimensioned drawing is so hard to read, here is a link to download it and blow it up to examine it in details

more >>
Peter Kennedy Yacht Services
$1,795.95 See It
Search within results
  • Find by Price
    • $ to $